![]() |
![]() |
#1 |
69 Fleetside
![]() Join Date: Mar 2009
Location: Lake Stevens, WA
Posts: 333
|
~The New Guy~
My weekend?! well.....I finally became a member here after lurking for months and scored a 69 Fleetside thanks to a motivated seller. It has very little rust, just surface around the weather stripping, slight exterior pitting on the rockers, and the drip rails are starting to pop in a few places, that's it!!! It was "grandpa's ol truck" with the original 307/2bbl and THM350 with only 132k miles on it, manual steering(sloppy) and power brakes. It has a decent sized dent in the passenger side bed, right above the wheel, but other than that is perfectly straight. It was resprayed a couple years ago this purple color(ugh), but it is a wonderful platform for beginning my project, and made the 40 mile trek home down I-5 at 70mph with zero issues....
the price?.......$2200, that's right...$2200. I couldn't be happier, and am super excited to start swapping out some parts and take this truck to the next level. Here are the craigslist photos, I'll try and get some new ones once it isn't rainy and crappy around here. ![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Feb 2009
Location: arroyo grande, ca
Posts: 206
|
Re: ~The New Guy~
Cool. Now you have a lot of work on your hands. BTW welcome.
James
__________________
James |
![]() |
![]() |
![]() |
#3 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: ~The New Guy~
Welcome from across the us. Looks like a nice ride for a starter.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 ![]() Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Feb 2008
Location: Lake Stevens, WA
Posts: 623
|
Re: ~The New Guy~
Nice truck. I saw that one on craigslist and tried to get my dad to buy it... he lives in lake stevens too. You did get a great deal!
Maybe I'll see you driving around. This is what I drive. ![]() |
![]() |
![]() |
![]() |
#5 |
Resident of Here
Join Date: May 2008
Location: Wesley Chapel, FL, USA
Posts: 7,716
|
Re: ~The New Guy~
Great deal! Welcome From NC!
__________________
~Bradley~ 2004 Black GTO LS2/T56 too much to list ![]() Miss having a truck ![]() |
![]() |
![]() |
![]() |
#6 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,859
|
Re: ~The New Guy~
WELCOME!!!
Looks good.Was it a white truck originally?
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Feb 2009
Location: Somerset, KY
Posts: 398
|
Re: ~The New Guy~
Welcome from Kentucky man, good looking truck!
|
![]() |
![]() |
![]() |
#8 |
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Re: ~The New Guy~
![]() Definitely a steal at $2200, nice looking truck!
__________________
-Nate ![]() 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) |
![]() |
![]() |
![]() |
#9 |
69 Fleetside
![]() Join Date: Mar 2009
Location: Lake Stevens, WA
Posts: 333
|
Re: ~The New Guy~
Thanks all.
Special K - It was an olive green truck from the factory - it appears they resprayed the interior the off white color at the same time he did the purple. After some more digging it is apparent it was a quicky job too, plenty of green still underneath the dash... |
![]() |
![]() |
![]() |
#10 |
Registered User
![]() Join Date: Jan 2008
Location: Buffalo, MO
Posts: 589
|
Re: ~The New Guy~
great deal, welcome from southwest Mo.
__________________
1967 Chevy long bed 1966 Chevy short stepside |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: ~The New Guy~
Congrats on the nice buy!!!!
Welcome...
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Apr 2007
Location: antreville, south carolina
Posts: 873
|
Re: ~The New Guy~
That thing is PIMPTASTIC!! lol jk nice score man
__________________
"Dixie Destroyer" 71 C10 LWB Fleet Future Blown Prostreet Monster |
![]() |
![]() |
![]() |
#13 |
Can't ReMember
Join Date: Dec 2006
Location: Orlando area
Posts: 258
|
Re: ~The New Guy~
Nice truck
Welcome to the forums..........................................
__________________
Adversity doesn't test your character; it reveals it. 71 C-10 LWB 350/TH350. I purchased it in 1978 for $1400. I'm currently abusing it daily. (when it's running ![]() Last edited by 71MUTT; 03-09-2009 at 03:05 PM. |
![]() |
![]() |
![]() |
#14 |
RIP BigDaddyDave ~7-23-09~ You will be missed~
Join Date: Aug 2007
Location: Concord NC
Posts: 1,361
|
Re: ~The New Guy~
Nice truck,welcome to the board!
__________________
BigDaddyDave's Truck: http://www.flickr.com/photos/daves71chevy/ | See it in Action! |
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Dec 2008
Location: Austin, MN
Posts: 117
|
Re: ~The New Guy~
Motivated seller = GREAT DEAL!!
|
![]() |
![]() |
![]() |
#16 |
Saving 1 truck at a time!
Join Date: Aug 2001
Location: Kent, WA
Posts: 6,465
|
Re: ~The New Guy~
Welcome from sunny, windy, snowy, South King County...LOL! Watch the local board activity for our frequent and entertaining get-togethers. Nice truck...HUSKY PURPLE!!!! Just paint some gold along the bottom and you will get a big thumbs up from half the population around here! Of course you will get the highway finger from all the Cougs!
__________________
'68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) |
![]() |
![]() |
![]() |
#17 |
69 Fleetside
![]() Join Date: Mar 2009
Location: Lake Stevens, WA
Posts: 333
|
Re: ~The New Guy~
I'm a coug, so the purple cuts at my soul! hehe!
It's come a long way so far...Totally gutted, wire wheeled all the loose rust, applied 2 coats and rinses of naval jelly, then 2 coats of rust inhibitor, then primer. The rest got the same plus the rattle can treatment; 3 coats of paint, 2 coats of clear. The end of my finger is still slightly numb from pressing those rustoleum tips for days on end. The only rusted through areas were in the low back of the cab and bottoms of the kick panels. These areas got good old jb weld putty. I got the new window felt/scrapers in tonight, along with the dash vents/tubes, cigarette lighter, igntion, rearview mirror, and dome light. You can see the metallic aluminum colored paint on the steering column, this is painted the same on the door panels, glove box, ashtray, etc...Just removing the cream and brown interior the PO had installed and repainting it has brought a good breathe of new life into it. ![]() ![]() ![]() ![]() Last edited by Beatcoaster; 04-08-2009 at 12:37 AM. |
![]() |
![]() |
![]() |
#18 |
TILT COLUMN GURU
![]() Join Date: Dec 2006
Location: FRESNO CA
Posts: 4,276
|
Re: ~The New Guy~
Welcome from Central Cali.
__________________
kevs_classics64 64 Impala SS Conv 72 Blazer 2wd 75 Jimmy 2wd 63 Belair wagon 02 Silverado ext cab. DD RIP EL JAY |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Sep 2008
Location: CASA GRANDE AZ
Posts: 4,276
|
Re: ~The New Guy~
Welcome nice truck
__________________
70 SWB STEPSIDE 70 BLAZER 09 challenger |
![]() |
![]() |
![]() |
#20 |
PROJECT 7DEUCE
![]() Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Re: ~The New Guy~
Wow she is a looker for sure congrats on your deal..
__________________
GO BIG GREEN ![]() MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
![]() |
![]() |
![]() |
#21 |
Saving 1 truck at a time!
Join Date: Aug 2001
Location: Kent, WA
Posts: 6,465
|
Re: ~The New Guy~
beatcoaster...looking good. Get ready for the big Monroe Swap Meet May 16-17 where we will all get together for burgers, brats and bench racing.
Indyuke...you are close enough to walk to Monroe from Marysville...well almost. Hope to see you there as well.
__________________
'68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) |
![]() |
![]() |
![]() |
#22 |
69 Fleetside
![]() Join Date: Mar 2009
Location: Lake Stevens, WA
Posts: 333
|
Re: ~The New Guy~
The swap meet sounds wonderful, but that is 2 weeks before my wedding and every last cent I have will be sucked into that event, so unfortunetly the best time for me to buy parts is also the worst...How often are the swap meets? It seems they are a couple times a year no? I may just go to meet some folks and drool over the things I want but cannot afford!!..
![]() Last edited by Beatcoaster; 04-08-2009 at 02:04 PM. |
![]() |
![]() |
![]() |
#23 |
Saving 1 truck at a time!
Join Date: Aug 2001
Location: Kent, WA
Posts: 6,465
|
Re: ~The New Guy~
No need to buy...but you will likely find something for $1-$10 that you cannot live without...LOL! Parking is $5..unless you find a free spot...also easy to do. There is another Monroe swap meet in October if you miss this one. It's fun just to look and hang out...inexpensive entertainment!
__________________
'68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) |
![]() |
![]() |
![]() |
#24 |
69 Fleetside
![]() Join Date: Mar 2009
Location: Lake Stevens, WA
Posts: 333
|
Re: ~The New Guy~
A couple more update photos...Interior is coming along nicely, although much slower now, busy weekends don't leave much time for this
New carpet, dynamatted the doors(not shown), and a mess of wires to be installed ![]() Polk db seperates in the dash, sounds nice ![]() Custom bracket I made to house the (2) 5-1/4's, barely cleared the top of the headunit ![]() Seat came out darn nice for stock foam(which was in amazing shape) and an extra 1" layer on top. ![]() Pedals in, doors together, 6x9's in, glove box in, heater controls in, headunit in, seat cover on and already stretching(annoying)...Seat mocked up, still need to paint brackets and install subwoofers and amplifier ![]() Bought a repop cover and two old gauge clusters, repainted and refurbed the gauges, got them all installed and rewired the truck pinouts per gmcpauls tip. All of them work like a champ from the get go and zero oil leaks from the gauge. lots of fingerprints, lol! ![]() I have an amp and two 8's that I will be building custom boxes under the bench seat for(stock gas tank still) which will be powering those and the 6x9's with just the deck running the dash sets crossedover at 80hz...Once that is complete it is time to begin work on the tired and very leaky drivetrain..... Last edited by Beatcoaster; 05-27-2009 at 12:08 AM. |
![]() |
![]() |
![]() |
#25 |
Registered User
Join Date: Feb 2007
Location: Cali Central Coast
Posts: 5,191
|
Re: ~The New Guy~
Wow, you've made a lot of progress on that truck. Keep us posted, and congratulations on getting married.
![]()
__________________
'67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD ![]() Click here to support the board Philippians 4: 6-7 |
![]() |
![]() |
![]() |
Bookmarks |
|
|