Wanted: 73-79 1/2 ton Chevy pickup - The 1947 - Present Chevrolet & GMC Truck Message Board Network

benscool1 · 03-13-2003, 12:17 AM

I'm 15 and am looking for a 73-87 Chevy pickup, preferably 73-79 because of the round headlights. I am definitely not asking for something I can get out and drive the day I get it, I really want a project that I can get some driving and mechanical experience with.

Does anyone have one for sale, probably under $600 or so? At least under a grand because I don't have much cash and am looking for a good project for my Dad and I to work on so I can drive it when I turn 16.

I would prefer the truck to have a 350 and auto tranny if at all possible and the body would have to be salvageable. I already know where I can get one in Minnesota but it is pretty far away from me and the truck is VERY rusty and also has a 4spd manual which I don't like(but could live with if it weren't so rusty).At least under a grand because I don't have much cash and am looking for a good project for my Dad and I to work on so I can drive it when I turn 16.

Can anyone help me out? Like i said, I'm looking for a PROJECT. Email me at benscool1@hotmail.com

kennyw · 03-21-2003, 03:38 PM

want to save a diesel burb from the scrap yard? It is still available and located in Illinois cheap.

benscool1 · 03-21-2003, 06:08 PM

Any idea on price.

benscool1 · 03-26-2003, 11:09 PM

I talked to him once, he said he was gonna go look at it and get some specifics on it for me, said only thing wrong was that some wires on the back of the motor melted or something? Any idea on how much it would cost to fix?

My dad said that the early diesels were unreliable, any word on that?

pashtrd · 03-28-2003, 10:45 AM

interested in an 84 gmc? 350/auto 4wd. it has a utility box. fenders/doors perfect. cab is iffy. motor just rebuilt. $600
south of Milwaukee
matt

pashtrd · 03-28-2003, 10:53 AM

here is 1 pic.
matt

pashtrd · 03-28-2003, 10:55 AM

and another

benscool1 · 03-28-2003, 09:45 PM

Sounds cool, can i get some more specifics? like A/C? etc.

pashtrd · 03-28-2003, 11:10 PM

i really dont know much about it. it was a customers truck. he brought it to me with a blown engine, and a "rebuilt" engine, and had me install the "new" one after removing the old. i know it is a 4-bolt main, 350 from a 79 chevy van. standard bore, standard bearings. new bearings, new rings, oil pump, cam/lifters etc. cylnders were honed by owner. new plugs/wires/cap/rotor etc. peice of cr@p carbuerator, will not idle smoothely, newer dual exhaust. i believe it is a 12 bolt posi rear. (not positive) battery will not hold a charge. no choke on carb. it runs and drives. it has a bad voltage regulator. i have another alternator that goes with it. also have another hood to go with it. now that i think of it it is a 1980 GMC. not an 84 sorry for that.4wd works good. part time 4wd. trans shifts ok. a little slow into reverse when it is cold. it is a short box with a frame extension. all doors on utility box open/close. ladder rack included. previous owner gave truck to me to pay bill. he lost his job and couldnt afford to pay his bill. so i got this truck.
let me know if you are interested, btw the price is negotiable. i just need this thing gone.
thanks
matt

pashtrd · 03-28-2003, 11:12 PM

oh another thing no A.C.
matt

benscool1 · 03-28-2003, 11:14 PM

I am interested, can u send me an email? Would a normal bed fit on it, short or long, or would you have to mess with the frame? So what all exactly is needed? From what you said I understand a new carbureator and battery is needed, but what else?

*rage'nrat638* · 03-28-2003, 11:19 PM

boy thats a nice truck i should buy that

stlaser · 03-29-2003, 10:06 PM

My step dad has an 86 GMC I think he wants $500 firm it has a newer 305 and newer transmission runs good. Roy Buskirk is his name call his office during the week at 260-622-6333 Located in Fort Wayne, IN.

03-13-2003, 12:17 AM	#1
benscool1 Registered User Join Date: Mar 2003 Location: Williamsfield, IL Posts: 781	Wanted: 73-79 1/2 ton Chevy pickup I'm 15 and am looking for a 73-87 Chevy pickup, preferably 73-79 because of the round headlights. I am definitely not asking for something I can get out and drive the day I get it, I really want a project that I can get some driving and mechanical experience with. Does anyone have one for sale, probably under $600 or so? At least under a grand because I don't have much cash and am looking for a good project for my Dad and I to work on so I can drive it when I turn 16. I would prefer the truck to have a 350 and auto tranny if at all possible and the body would have to be salvageable. I already know where I can get one in Minnesota but it is pretty far away from me and the truck is VERY rusty and also has a 4spd manual which I don't like(but could live with if it weren't so rusty).At least under a grand because I don't have much cash and am looking for a good project for my Dad and I to work on so I can drive it when I turn 16. Can anyone help me out? Like i said, I'm looking for a PROJECT. Email me at benscool1@hotmail.com __________________ Ben 84 C10 Silverado 14 Silverado Z71

03-21-2003, 03:38 PM	#2
kennyw N9PHW Join Date: Jan 2003 Location: PNW USA Posts: 131	want to save a diesel burb from the scrap yard? It is still available and located in Illinois cheap. __________________ "I got it one piece at a time and it didn't cost me a dime..."

03-21-2003, 06:08 PM	#3
benscool1 Registered User Join Date: Mar 2003 Location: Williamsfield, IL Posts: 781	Any idea on price. __________________ Ben 84 C10 Silverado 14 Silverado Z71

03-26-2003, 11:09 PM	#4
benscool1 Registered User Join Date: Mar 2003 Location: Williamsfield, IL Posts: 781	I talked to him once, he said he was gonna go look at it and get some specifics on it for me, said only thing wrong was that some wires on the back of the motor melted or something? Any idea on how much it would cost to fix? My dad said that the early diesels were unreliable, any word on that? __________________ Ben 84 C10 Silverado 14 Silverado Z71

03-28-2003, 10:45 AM	#5
pashtrd Registered User Join Date: Mar 2003 Location: oak creek WI Posts: 82	interested in an 84 gmc? 350/auto 4wd. it has a utility box. fenders/doors perfect. cab is iffy. motor just rebuilt. $600 south of Milwaukee matt __________________ never argue with an idiot, they will drag you down to their level, and beat you with experience.

03-28-2003, 10:53 AM	#6
pashtrd Registered User Join Date: Mar 2003 Location: oak creek WI Posts: 82	here is 1 pic. matt Attached Images __________________ never argue with an idiot, they will drag you down to their level, and beat you with experience.

03-28-2003, 10:55 AM	#7
pashtrd Registered User Join Date: Mar 2003 Location: oak creek WI Posts: 82	and another Attached Images __________________ never argue with an idiot, they will drag you down to their level, and beat you with experience.

03-28-2003, 09:45 PM	#8
benscool1 Registered User Join Date: Mar 2003 Location: Williamsfield, IL Posts: 781	Sounds cool, can i get some more specifics? like A/C? etc. __________________ Ben 84 C10 Silverado 14 Silverado Z71

03-28-2003, 11:10 PM	#9
pashtrd Registered User Join Date: Mar 2003 Location: oak creek WI Posts: 82	i really dont know much about it. it was a customers truck. he brought it to me with a blown engine, and a "rebuilt" engine, and had me install the "new" one after removing the old. i know it is a 4-bolt main, 350 from a 79 chevy van. standard bore, standard bearings. new bearings, new rings, oil pump, cam/lifters etc. cylnders were honed by owner. new plugs/wires/cap/rotor etc. peice of cr@p carbuerator, will not idle smoothely, newer dual exhaust. i believe it is a 12 bolt posi rear. (not positive) battery will not hold a charge. no choke on carb. it runs and drives. it has a bad voltage regulator. i have another alternator that goes with it. also have another hood to go with it. now that i think of it it is a 1980 GMC. not an 84 sorry for that.4wd works good. part time 4wd. trans shifts ok. a little slow into reverse when it is cold. it is a short box with a frame extension. all doors on utility box open/close. ladder rack included. previous owner gave truck to me to pay bill. he lost his job and couldnt afford to pay his bill. so i got this truck. let me know if you are interested, btw the price is negotiable. i just need this thing gone. thanks matt __________________ never argue with an idiot, they will drag you down to their level, and beat you with experience.

03-28-2003, 11:12 PM	#10
pashtrd Registered User Join Date: Mar 2003 Location: oak creek WI Posts: 82	oh another thing no A.C. matt __________________ never argue with an idiot, they will drag you down to their level, and beat you with experience.

03-28-2003, 11:14 PM	#11
benscool1 Registered User Join Date: Mar 2003 Location: Williamsfield, IL Posts: 781	I am interested, can u send me an email? Would a normal bed fit on it, short or long, or would you have to mess with the frame? So what all exactly is needed? From what you said I understand a new carbureator and battery is needed, but what else? __________________ Ben 84 C10 Silverado 14 Silverado Z71

03-28-2003, 11:19 PM	#12
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	boy thats a nice truck i should buy that

03-29-2003, 10:06 PM	#13
stlaser Fabricator Join Date: Mar 2003 Location: Indiana Posts: 156	My step dad has an 86 GMC I think he wants $500 firm it has a newer 305 and newer transmission runs good. Roy Buskirk is his name call his office during the week at 260-622-6333 Located in Fort Wayne, IN. __________________ 84 C30 Chassis 60 & 14, 454/400/NP205 Retroing 98 X-tended Cab Built with the blood and sweat from the hands of a Chevy man.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.