The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-10-2009, 10:34 AM   #1
b00sted
Registered User
 
b00sted's Avatar
 
Join Date: May 2008
Location: Midland GA
Posts: 332
How to remove leafs from leaf springs..

just like the title says... I want to go ahead and get the 8.8 in the truck and use the spring perch method for now and was wondering how to remove some of the leafs.. My truck has a good number of leafs on the springs and it sits way up there.. I am of course going to mount the rearend ontop of the leaf spring instead of under it..

But need a bit more to get it where I want it and do not want all those leafs hanging under the rear axle..

Alos how many should I take out .. i am never going to haul anything in the bed of this truck or towe anything with it.... As you can see in the pic it is up there...
Attached Images
 
__________________
1949 Chevy 408 CID stroker 6.0l with a few add ons, 4l80E, 4 Wheel Disk Brakes and a set of GT35 going on soon.

Last edited by b00sted; 03-10-2009 at 10:38 AM.
b00sted is offline   Reply With Quote
Old 03-10-2009, 01:04 PM   #2
mylow53
Registered User
 
mylow53's Avatar
 
Join Date: Sep 2006
Location: thousand oaks, California
Posts: 732
Re: How to remove leafs from leaf springs..

have you thought about bending them instead?
GT
__________________
Greg
1953 chevy 1/2 ton 5 window, chevy 350 330 horse 700r tranz, lowering spindels mustang 2 frount. ford 9", airbags on 4 corners . purchased in 1983 for $325 while in high school
http://67-72chevytrucks.com/vboard/s...=215079&page=5
mylow53 is offline   Reply With Quote
Old 03-10-2009, 01:11 PM   #3
OrrieG
Registered User
 
OrrieG's Avatar
 
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
Re: How to remove leafs from leaf springs..

Usually they are bolted together with one center bolt at the perch location. They may have some U type clips or side plates bolted together holding them in alignment. Once unbolted they should fall off, depending on how much rust there holding them together. The main spring is attached to the shackles.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread
1964 Chevelle Malibu w/ 355-350TH (daily driver)
Helpful AD and TF Manual Site Old Car Manual Project
OrrieG is offline   Reply With Quote
Old 03-10-2009, 01:14 PM   #4
b00sted
Registered User
 
b00sted's Avatar
 
Join Date: May 2008
Location: Midland GA
Posts: 332
Re: How to remove leafs from leaf springs..

How many is safe to take out? Should I stick with a leaf and the main spring? I think it has 4 or 5 on there now...
__________________
1949 Chevy 408 CID stroker 6.0l with a few add ons, 4l80E, 4 Wheel Disk Brakes and a set of GT35 going on soon.
b00sted is offline   Reply With Quote
Old 03-10-2009, 01:34 PM   #5
mylow53
Registered User
 
mylow53's Avatar
 
Join Date: Sep 2006
Location: thousand oaks, California
Posts: 732
Re: How to remove leafs from leaf springs..

i took out 3 in the front to get it down. all of the strength is in the primary spring as far as keeping the axel centered. the amount of springs depends on the weight of the truck and load. your call
GT
__________________
Greg
1953 chevy 1/2 ton 5 window, chevy 350 330 horse 700r tranz, lowering spindels mustang 2 frount. ford 9", airbags on 4 corners . purchased in 1983 for $325 while in high school
http://67-72chevytrucks.com/vboard/s...=215079&page=5
mylow53 is offline   Reply With Quote
Old 03-10-2009, 01:59 PM   #6
b00sted
Registered User
 
b00sted's Avatar
 
Join Date: May 2008
Location: Midland GA
Posts: 332
Re: How to remove leafs from leaf springs..

Thanks for the help guys.. I have to move the spring perch on the 8.8 but that is no big deal..

I will be yanking these out this weekend....
__________________
1949 Chevy 408 CID stroker 6.0l with a few add ons, 4l80E, 4 Wheel Disk Brakes and a set of GT35 going on soon.
b00sted is offline   Reply With Quote
Old 03-10-2009, 06:19 PM   #7
blackdiesel
Registered User
 
blackdiesel's Avatar
 
Join Date: Jan 2009
Location: Omaha, Arkansas
Posts: 929
Re: How to remove leafs from leaf springs..

As far as leaf springs go, just take the pin out of the center and pull out as much as necessary. On my '38 i'm just running the single leaf in the rear. Just make sure to get a really stiff shock. Possibly even air shocks if desired

Now i've seen where you are wanting to "drag the boards" so why are you even wasting time with leaves? in order to achieve your goal you are looking at a set of air bags and a 4 link. dont forget the c notched frame!
__________________
'57 Chevy Pickup
'56 GMC LCF Cummins
'38 Chrysler Royal
'57 2wd change
http://67-72chevytrucks.com/vboard/s...light=speedway
blackdiesel is offline   Reply With Quote
Old 03-10-2009, 06:27 PM   #8
blackdiesel
Registered User
 
blackdiesel's Avatar
 
Join Date: Jan 2009
Location: Omaha, Arkansas
Posts: 929
Re: How to remove leafs from leaf springs..

Also, be sure to lower the front end where you desire it for ride height before you weld your spring perches on the rear end! or your pinion angle will be wrong
__________________
'57 Chevy Pickup
'56 GMC LCF Cummins
'38 Chrysler Royal
'57 2wd change
http://67-72chevytrucks.com/vboard/s...light=speedway
blackdiesel is offline   Reply With Quote
Old 03-10-2009, 07:02 PM   #9
b00sted
Registered User
 
b00sted's Avatar
 
Join Date: May 2008
Location: Midland GA
Posts: 332
Re: How to remove leafs from leaf springs..

won't be dragging the boards on this one anytime soon.. It has a c10 fron IFS in it right now so I am going to pro street it...
__________________
1949 Chevy 408 CID stroker 6.0l with a few add ons, 4l80E, 4 Wheel Disk Brakes and a set of GT35 going on soon.
b00sted is offline   Reply With Quote
Old 03-10-2009, 07:30 PM   #10
blackdiesel
Registered User
 
blackdiesel's Avatar
 
Join Date: Jan 2009
Location: Omaha, Arkansas
Posts: 929
Re: How to remove leafs from leaf springs..

Quote:
Originally Posted by b00sted View Post
won't be dragging the boards on this one anytime soon.. It has a c10 fron IFS in it right now so I am going to pro street it...
a pro street or a street rod? for a true pro street your talking a narrowed rear end and tubs. a street rod would make for a real nice daily driver
__________________
'57 Chevy Pickup
'56 GMC LCF Cummins
'38 Chrysler Royal
'57 2wd change
http://67-72chevytrucks.com/vboard/s...light=speedway
blackdiesel is offline   Reply With Quote
Old 03-10-2009, 09:47 PM   #11
b00sted
Registered User
 
b00sted's Avatar
 
Join Date: May 2008
Location: Midland GA
Posts: 332
Re: How to remove leafs from leaf springs..

planning on back halfing it...
__________________
1949 Chevy 408 CID stroker 6.0l with a few add ons, 4l80E, 4 Wheel Disk Brakes and a set of GT35 going on soon.
b00sted is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:47 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com