FS: Blazer firewall - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TooT · 03-23-2009, 12:32 AM

This came with the 2wd Jimmy that i recently bought from Craig(LUV2XCLR8) and i dont need it. I honestly dont know much about this but if you have any questions that i cant answer then hopefully Craig will help you if you PM him. here are a couple of not so great pics...upside down and sideways lol. I'm asking $400 ~OBO~ I can deliver this to the maggie valley/Newport, TN show coming up soon free of charge! or of course pick-up only in northeast part of Tennessee(37641).

LUV2XCLR8 · 03-23-2009, 08:04 AM

Basically it is a Complete A/C, Non cut dash, Firewall and
Windsheild unit with a perfect Windsheild frame. The unit
was cut from a Blazer/Jimmy as a whole because a lot of
these either have the Windsheild frame bad, the Firewall
has rust or even all of the above. It is an incredibly solid
unit and spliceable right where the floor pans hit into the
lower part of the Firewall. (The crease running across) It
is from a 4wd and set-up for the bolt in High hump cover.
Just PM me if you have any more ?'s if April can't answer.

Luv

TooT · 03-23-2009, 10:32 AM

Quote:

Originally Posted by LUV2XCLR8

Basically it is a Complete A/C, Non cut dash, Firewall and
Windsheild unit with a perfect Windsheild frame. The unit
was cut from a Blazer/Jimmy as a whole because a lot of
these either have the Windsheild frame bad, the Firewall
has rust or even all of the above. It is an incredibly solid
unit and spliceable right where the floor pans hit into the
lower part of the Firewall. (The crease running across) It
is from a 4wd and set-up for the bolt in High hump cover.
Just PM me if you have any more ?'s if April can't answer.

Luv

Thank you!

LUV2XCLR8 · 03-23-2009, 10:43 AM

Your most Welcome

Chevy_Man · 03-23-2009, 10:47 AM

Hey Wynne might need this for his Blazer project.....Craig.....

HuggerCST · 03-23-2009, 11:01 AM

I do. Coming up with the $$$ is the only problem.

TooT · 03-23-2009, 11:45 AM

Quote:

Originally Posted by HuggerCST

I do. Coming up with the $$$ is the only problem.

I'll work with ya a little on the price. I'm selling this to pay for the parts to finish the airbags which is $528 so far

HuggerCST · 03-23-2009, 11:51 AM

Do you finance?

Got any way of getting it back west(Or to the Charlotte area)?

TooT · 03-23-2009, 12:52 PM

Quote:

Originally Posted by HuggerCST

Do you finance?

Got any way of getting it back west(Or to the Charlotte area)?

Not at the moment. will you be at the newport show? if not then maybe somebody you know will be there and can bring it to ya? we can figure something out

TooT · 03-29-2009, 03:41 PM

Bump

HuggerCST · 03-29-2009, 08:26 PM

Quote:

Originally Posted by TooT

Not at the moment. will you be at the newport show? if not then maybe somebody you know will be there and can bring it to ya? we can figure something out

Right now I don't have any trips planned over that way until maybe late summer. If I figure something out I'll get back to you.

**Ron 586** · 03-30-2009, 01:13 AM

Quote:

Originally Posted by HuggerCST

Right now I don't have any trips planned over that way until maybe late summer. If I figure something out I'll get back to you.

Are you or any of your crew coming to my meet in July. I have to pick up a truck bed and fenders I bought from her so I might could get them here. LMK

HuggerCST · 03-30-2009, 02:42 PM

Quote:

Originally Posted by Ron 586

Are you or any of your crew coming to my meet in July. I have to pick up a truck bed and fenders I bought from her so I might could get them here. LMK

I'll let you know Ron. Thanks for the offer.

TooT · 03-30-2009, 03:04 PM

Ron is a awesome guy!

Critter · 03-30-2009, 08:55 PM

Toot or Luv...I am finding more and more rust on my firewall/windshield frame, so this is sounding more tempting by the minute. Do ya'll know what year it is from? I don't think it matters as Blazers/Jimmys were all the same in this area, right? I know it is in incredible shape, but is there any rust or deep pitting ANYWHERE that you could show me with pics (other than the small hole I can see around the driver’s floor area)? I am particularly concerned with the kick panel vent areas. At least that’s where most of the previously unseen rust appeared on mine when I started tearing it down. Thanks!

**71swb4x4** · 03-30-2009, 09:47 PM

That firewall came from a 1972 Jimmy in dry Western South Dakota. The tub itself didn't have all that bad of rust on it. When I bought it the seller lived 430 miles away from me in the Black Hills. He offered to bring it to within 50 miles of my house, but only had his truck bed to haul it with. So, he cut what you see off the tub for me.

I can vouch for Craig and Toot's words, the firewall and frame are in great shape. I don't remember the exact rust spots (there wasn't much if any), but I am sure Craig and Toot can fill in the blanks.

TooT · 03-31-2009, 04:22 AM

I'll try to get it out in the daylight and take better pics and check it over really good for ANY rust spots

Jtrux · 03-31-2009, 11:17 AM

Quote:

Originally Posted by critter

toot or luv...i am finding more and more rust on my firewall/windshield frame, so this is sounding more tempting by the minute. Do ya'll know what year it is from? I don't think it matters as blazers/jimmys were all the same in this area, right? I know it is in incredible shape, but is there any rust or deep pitting anywhere that you could show me with pics (other than the small hole i can see around the driver’s floor area)? I am particularly concerned with the kick panel vent areas. At least that’s where most of the previously unseen rust appeared on mine when i started tearing it down. Thanks!

buy it!!

earl87gta · 04-04-2009, 04:01 AM

Hey guys i go to Fla 2 or 3 times a year so I can get it down that far for some one.

TooT · 04-10-2009, 09:52 PM

I'll try to get good pics of this tomorrow when i get some help moving it outside

TooT · 04-13-2009, 01:52 PM

$350 obo. can deliver for free to the newport, TN show in may.

**yellowblazer1969** · 04-13-2009, 03:53 PM

did you ever get any more pictures, i am interested but just want to make sure it is solid.

thanks, chris

TooT · 04-13-2009, 04:15 PM

Quote:

Originally Posted by yellowblazer1969

did you ever get any more pictures, i am interested but just want to make sure it is solid.

thanks, chris

I will try my best to get them tomorrow...ive been on vacation and didnt do much around here. check back tomorrow

crr26@cox.net · 04-14-2009, 12:45 AM

would like to see more pics of the windshield frame. also i live in louisiana so any suggestions on getting it here? trucking etc, have found a bunch of blazers in area but most of theme have major rust issues around windshield and im thinking about buying this for later

TooT · 04-14-2009, 12:53 PM

This is the only bad spot that i could find and it's not really all that bad.

more pics.

Here is a ding on the top passenger side of the firewall..

Better shot of the rust hole in the driver floor.

03-23-2009, 12:32 AM	#1
TooT Active Member Join Date: Apr 2005 Location: Jonesborough, TN Posts: 390	FS: Blazer firewall This came with the 2wd Jimmy that i recently bought from Craig(LUV2XCLR8) and i dont need it. I honestly dont know much about this but if you have any questions that i cant answer then hopefully Craig will help you if you PM him. here are a couple of not so great pics...upside down and sideways lol. I'm asking $400 ~OBO~ I can deliver this to the maggie valley/Newport, TN show coming up soon free of charge! or of course pick-up only in northeast part of Tennessee(37641).

03-23-2009, 08:04 AM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: FS: Blazer firewall Basically it is a Complete A/C, Non cut dash, Firewall and Windsheild unit with a perfect Windsheild frame. The unit was cut from a Blazer/Jimmy as a whole because a lot of these either have the Windsheild frame bad, the Firewall has rust or even all of the above. It is an incredibly solid unit and spliceable right where the floor pans hit into the lower part of the Firewall. (The crease running across) It is from a 4wd and set-up for the bolt in High hump cover. Just PM me if you have any more ?'s if April can't answer. Luv __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T Last edited by LUV2XCLR8; 03-23-2009 at 08:04 AM.

03-23-2009, 10:43 AM	#4
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: FS: Blazer firewall Your most Welcome __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

03-23-2009, 10:47 AM	#5
Chevy_Man Tightwad Join Date: Jun 2005 Location: Louisiana Posts: 408	Re: FS: Blazer firewall Hey Wynne might need this for his Blazer project.....Craig..... __________________ 56 Chevy custom cab step side under construction 55 Chevy 210 68 SWB Stepside back burner under construction 72 Chevy LWB 84 CJ 7 05 Chevy 1500 Crew Cab 30X40 DOGHOUSE(shop) with many add ons

03-23-2009, 11:01 AM	#6
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: FS: Blazer firewall I do. Coming up with the $$$ is the only problem. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

03-23-2009, 11:51 AM	#8
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: FS: Blazer firewall Do you finance? Got any way of getting it back west(Or to the Charlotte area)? __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com Last edited by HuggerCST; 03-23-2009 at 11:53 AM.

03-29-2009, 03:41 PM	#10
TooT Active Member Join Date: Apr 2005 Location: Jonesborough, TN Posts: 390	Re: FS: Blazer firewall Bump

03-30-2009, 03:04 PM	#14
TooT Active Member Join Date: Apr 2005 Location: Jonesborough, TN Posts: 390	Re: FS: Blazer firewall Ron is a awesome guy!

03-30-2009, 08:55 PM	#15
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: FS: Blazer firewall Toot or Luv...I am finding more and more rust on my firewall/windshield frame, so this is sounding more tempting by the minute. Do ya'll know what year it is from? I don't think it matters as Blazers/Jimmys were all the same in this area, right? I know it is in incredible shape, but is there any rust or deep pitting ANYWHERE that you could show me with pics (other than the small hole I can see around the driver’s floor area)? I am particularly concerned with the kick panel vent areas. At least that’s where most of the previously unseen rust appeared on mine when I started tearing it down. Thanks! __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

03-30-2009, 09:47 PM	#16
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,499	Re: FS: Blazer firewall That firewall came from a 1972 Jimmy in dry Western South Dakota. The tub itself didn't have all that bad of rust on it. When I bought it the seller lived 430 miles away from me in the Black Hills. He offered to bring it to within 50 miles of my house, but only had his truck bed to haul it with. So, he cut what you see off the tub for me. I can vouch for Craig and Toot's words, the firewall and frame are in great shape. I don't remember the exact rust spots (there wasn't much if any), but I am sure Craig and Toot can fill in the blanks. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. Last edited by 71swb4x4; 03-30-2009 at 09:48 PM.

03-31-2009, 04:22 AM	#17
TooT Active Member Join Date: Apr 2005 Location: Jonesborough, TN Posts: 390	Re: FS: Blazer firewall I'll try to get it out in the daylight and take better pics and check it over really good for ANY rust spots

04-04-2009, 04:01 AM	#19
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: FS: Blazer firewall Hey guys i go to Fla 2 or 3 times a year so I can get it down that far for some one. __________________ Earl 68 2500 4x4 GMC Burb

04-10-2009, 09:52 PM	#20
TooT Active Member Join Date: Apr 2005 Location: Jonesborough, TN Posts: 390	Re: FS: Blazer firewall I'll try to get good pics of this tomorrow when i get some help moving it outside

04-13-2009, 01:52 PM	#21
TooT Active Member Join Date: Apr 2005 Location: Jonesborough, TN Posts: 390	Re: FS: Blazer firewall $350 obo. can deliver for free to the newport, TN show in may.

04-13-2009, 03:53 PM	#22
yellowblazer1969 Registered User Join Date: Jul 2004 Location: columbia sc Posts: 387	Re: FS: Blazer firewall did you ever get any more pictures, i am interested but just want to make sure it is solid. thanks, chris



Register or Log In To remove these advertisements.

04-14-2009, 12:45 AM	#24
crr26@cox.net Registered User Join Date: Apr 2009 Location: abbeville louisiana Posts: 183	Re: FS: Blazer firewall would like to see more pics of the windshield frame. also i live in louisiana so any suggestions on getting it here? trucking etc, have found a bunch of blazers in area but most of theme have major rust issues around windshield and im thinking about buying this for later

04-14-2009, 12:53 PM	#25
TooT Active Member Join Date: Apr 2005 Location: Jonesborough, TN Posts: 390	Re: FS: Blazer firewall This is the only bad spot that i could find and it's not really all that bad. more pics. Here is a ding on the top passenger side of the firewall.. Better shot of the rust hole in the driver floor. Last edited by TooT; 04-14-2009 at 12:55 PM.

Register or Log In To remove these advertisements.