How are you guys bolting.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67chevemall · 03-23-2009, 11:26 AM

the bed down when the gas tank is at the back between the frame?

All I can think of is to weld the nuts on the frame. As I can't get my hand in there once the tank is in.

my67chevytruck · 03-23-2009, 12:52 PM

weld the nuts to the frame, or drop the tank, install the bed, then reinstall the tank. I wouldnt think you would be removing the bed much?

cdowns · 03-23-2009, 01:04 PM

welding nuts for carrige bolts i somwhat nuts

67chevemall · 03-23-2009, 01:04 PM

you wouldn't think so....lately it is on and off on and off.

Ill have to check and see if I can get at the tank bolts.

humm what about the Carage bolts with welded nuts won't work.

I think I'll have to put the tank in last.
Had tank and tire in the bed. now I have bags to put in and the tank is going under
the bed now. (dirt bike needs the bed)
CAA is my spare tire.
Have to change the exhaust out the back, to infront of the rearend.
All these changes....
Spring fever

cdowns · 03-23-2009, 01:26 PM

hold carrige bolt in hand LOOK at it and figure whats wrong with this picture

67chevemall · 03-23-2009, 01:35 PM

humm what about the Carage bolts with welded nuts won't work.

I think I'll have to put the tank in last.

Thanks guys.

Have to make the tank go in and out nice nice

my67chevytruck · 03-23-2009, 01:42 PM

Quote:

Originally Posted by cdowns

welding nuts for carrige bolts i somwhat nuts

doh, i wasnt thinking straight but atleast i followed up with dropping the tank, install the bed , then install tank...

**LockDoc** · 03-23-2009, 03:18 PM

Quote:

Originally Posted by my67chevytruck

doh, i wasnt thinking straight but atleast i followed up with dropping the tank, install the bed , then install tank...

Don't worry about it we all have those days...

LockDoc

Sammy · 03-23-2009, 03:56 PM

I used a self tapping sheetmetal screw. It has a 9/16 wrenching head probally 3/8 diameter shank. It has a rubber washer under the head. Hardest part was drilling a pilot hole in the hard frame.

67chevemall · 03-23-2009, 04:04 PM

Quote:

Originally Posted by Sammy

I used a self tapping sheetmetal screw. It has a 9/16 wrenching head probally 3/8 diameter shank. It has a rubber washer under the head. Hardest part was drilling a pilot hole in the hard frame.

Use to put up steel buildings....they are my favorite! Use em everywhere

So you are talking about the gas tank not the bed right>?

67chevemall · 03-27-2009, 12:34 PM

Tank is going back under the bed.

03-23-2009, 11:26 AM	#1
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	How are you guys bolting.... the bed down when the gas tank is at the back between the frame? All I can think of is to weld the nuts on the frame. As I can't get my hand in there once the tank is in. __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

03-23-2009, 12:52 PM	#2
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: How are you guys bolting.... weld the nuts to the frame, or drop the tank, install the bed, then reinstall the tank. I wouldnt think you would be removing the bed much? __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

03-23-2009, 01:04 PM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: How are you guys bolting.... welding nuts for carrige bolts i somwhat nuts __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

03-23-2009, 01:04 PM	#4
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: How are you guys bolting.... you wouldn't think so....lately it is on and off on and off. Ill have to check and see if I can get at the tank bolts. humm what about the Carage bolts with welded nuts won't work. I think I'll have to put the tank in last. Had tank and tire in the bed. now I have bags to put in and the tank is going under the bed now. (dirt bike needs the bed) CAA is my spare tire. Have to change the exhaust out the back, to infront of the rearend. All these changes.... Spring fever __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

03-23-2009, 01:26 PM	#5
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: How are you guys bolting.... hold carrige bolt in hand LOOK at it and figure whats wrong with this picture __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

03-23-2009, 01:35 PM	#6
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: How are you guys bolting.... humm what about the Carage bolts with welded nuts won't work. I think I'll have to put the tank in last. Thanks guys. Have to make the tank go in and out nice nice __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

03-23-2009, 03:56 PM	#9
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: How are you guys bolting.... I used a self tapping sheetmetal screw. It has a 9/16 wrenching head probally 3/8 diameter shank. It has a rubber washer under the head. Hardest part was drilling a pilot hole in the hard frame. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629" Last edited by Sammy; 03-23-2009 at 03:57 PM. Reason: edit

03-27-2009, 12:34 PM	#11
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: How are you guys bolting.... Tank is going back under the bed. __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD Last edited by 67chevemall; 07-09-2010 at 02:26 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.