1982 chevy c10 stepside lowering - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bradley_racing · 03-23-2009, 12:44 PM

hello i have a 1982 chevy c10 stepside that i want to make into a pro street style truck. any ideas what kind of trop i will need im putting 15 inch rims all the way around. any ideas would be appreciated and pictures if you want to send them.thank you

bradley_racing · 03-23-2009, 09:25 PM

somebody please help ive been thinking about this all week thanks

**N2TRUX** · 03-23-2009, 11:25 PM

You need to be more specific on what you plan to run. When you say "Pro Street", does that mean a narrowed rear with a 4 link? Are you considering a panhard bar or watts link? Coil overs, bags or leafs?

Help us so we can help you...

bradley_racing · 03-24-2009, 05:38 PM

ok sorry bout that m not going to narrow the rear at al just run coilovers in the front and im thinking about flipping the rear axle. im just wanting it to be low but not slammed.

Wild83C10 · 03-24-2009, 09:07 PM

Here is my truck 6 years ago. It had just a flip kit in the rear and a 2" lowering spindle with (I think) a 2" lowering spring in the front. That was a 28 or 29" tall tire, 15x8 front, 15x10s rear. To get it slightly lower and sit real nice I would do a flip kit and remove the overload leaf in the rear. In the front I would do a 5" drop in the front. 3" lowering spindle? and a 2" spring.

flamingbig10 · 03-25-2009, 02:20 AM

mine's kinda pro street
3" spindles and springs and a 6" flip kit with 3 leafs no over load in front 15x7 215/ 70 26.9" tall back 15 x8 275/60 28" tall

03-23-2009, 12:44 PM	#1
bradley_racing Registered User Join Date: Mar 2009 Location: emporia kansas Posts: 3	1982 chevy c10 stepside lowering hello i have a 1982 chevy c10 stepside that i want to make into a pro street style truck. any ideas what kind of trop i will need im putting 15 inch rims all the way around. any ideas would be appreciated and pictures if you want to send them.thank you

03-23-2009, 09:25 PM	#2
bradley_racing Registered User Join Date: Mar 2009 Location: emporia kansas Posts: 3	Re: 1982 chevy c10 stepside lowering somebody please help ive been thinking about this all week thanks

03-23-2009, 11:25 PM	#3
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: 1982 chevy c10 stepside lowering You need to be more specific on what you plan to run. When you say "Pro Street", does that mean a narrowed rear with a 4 link? Are you considering a panhard bar or watts link? Coil overs, bags or leafs? Help us so we can help you... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

03-24-2009, 05:38 PM	#4
bradley_racing Registered User Join Date: Mar 2009 Location: emporia kansas Posts: 3	Re: 1982 chevy c10 stepside lowering ok sorry bout that m not going to narrow the rear at al just run coilovers in the front and im thinking about flipping the rear axle. im just wanting it to be low but not slammed.

03-24-2009, 09:07 PM	#5
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: 1982 chevy c10 stepside lowering Here is my truck 6 years ago. It had just a flip kit in the rear and a 2" lowering spindle with (I think) a 2" lowering spring in the front. That was a 28 or 29" tall tire, 15x8 front, 15x10s rear. To get it slightly lower and sit real nice I would do a flip kit and remove the overload leaf in the rear. In the front I would do a 5" drop in the front. 3" lowering spindle? and a 2" spring. __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time Last edited by Wild83C10; 03-24-2009 at 09:08 PM.

03-25-2009, 02:20 AM	#6
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: 1982 chevy c10 stepside lowering mine's kinda pro street 3" spindles and springs and a 6" flip kit with 3 leafs no over load in front 15x7 215/ 70 26.9" tall back 15 x8 275/60 28" tall __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 Last edited by flamingbig10; 03-25-2009 at 02:26 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.