|
03-27-2009, 08:01 AM
|
#1 |
|
Senior Member
 
Join Date: Jun 2005
Location: Winona Lake, IN
Posts: 6,414
|
McGaughy's brake kits
Anybody know if McGaughy's disc brake kit p/n 63157 for 60-72 trucks work with the stock drum-brake spindles? Found a kit on ebay for $269. The seller says they "should" work with stock spindles. Any info would be appreciated.
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear |
|
|
|
03-27-2009, 10:20 AM
|
#2 | |
|
VA72C10
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,267
|
Re: McGaughy's brake kits
Quote:
__________________
Looking for a 67-72 swb or blazer project in or around VA. 
|
|
|
|
|
|
03-27-2009, 01:58 PM
|
#3 |
|
Registered User
Join Date: Feb 2002
Location: Vacaville, CA
Posts: 2,745
|
Re: McGaughy's brake kits
That kit is supposed to have come with spindles (I have that kit) it will not work with drum spindles.
__________________
 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI |
|
|
|
|
03-27-2009, 02:14 PM
|
#4 |
|
Senior Member
Join Date: Jun 2005
Location: Winona Lake, IN
Posts: 6,414
|
Re: McGaughy's brake kits
VA and neonlarry, thanks for the info.
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear |
|
|
|
|
03-27-2009, 02:17 PM
|
#5 |
|
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,992
|
Re: McGaughy's brake kits
There's no mount for the calipers on the drum spindles.The spindles are about $49.00 or so IIRC.They do bolt up easily.If you swap spindles paint them before installing.They will rust if you don't.
Someone used to make(they may still) a kit with brackets that would bolt to the drum spindles and allow you to run disc brakes.I don't have the link anymore and can't remember who it was.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" Last edited by PanelDeland; 03-27-2009 at 02:18 PM. |
|
|
|
|
03-27-2009, 02:26 PM
|
#6 |
|
Senior Member
Join Date: Jun 2005
Location: Winona Lake, IN
Posts: 6,414
|
Re: McGaughy's brake kits
I thought I saw some brackets on here a while back that would bolt on the drum spindles in the holes for the backing plates and the calipers would bolt to the brackets. Anyone know who makes 'em or sells 'em?
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
