A 70 GMC now - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 03-27-2009, 07:56 PM

This is a 70 GMC C20, I will be parting it out as usual

Ask questions in thread. Pay pal or money order. Thanks Randy
Exhaust manifolds $50 plus shipping for pair-SOLD
4 speed high hump $25 plus shipping
4 speed steering column $40 plus shipping-SOLD
V8 motor stands $30 shipped
Good radiator support, $50 sale pending
metal door panels, drivers has a couple small dings and a ring where the window crank rubbed, pass is is beat up bad $10 plus ship
See anything else you may want ask and I'll price, Thanks Randy

Hottrucks · 03-27-2009, 08:08 PM

would you consider clipping the header pipes out ( not the rams the acual pipes) with the clamp ring?? the E brake cables,and I need a upper radiator support hold down for a 4 core I have a 70 I'm trying to put together on a low budget
thanx jeff

Wootdog · 03-27-2009, 08:16 PM

Randy,
I need a passenger door. I know you normally don't ship the heavy and or big parts, but I need a right door.
Kerry

teeitup · 03-27-2009, 11:57 PM

Hottrucks, how much of the exhaust pipes you needing? Sorry it doesn't have any E-brake cables on it. No upper 4 core mounts, I'll look and see if the lowers are there.
Wootdog, Kerry, sorry I still don't mess with shipping doors
Thanks Randy

bad421 · 03-28-2009, 12:29 AM

how much would shipping on the 4spd column be to Va. 23061? thanks

gottwake · 03-28-2009, 12:54 AM

Do you have these two parts? They are the Steering column front and support plates.

Hottrucks · 03-28-2009, 05:40 AM

randy I would take as much as it has or is easy to get out I'm going to have to build a full exhaust anyway..I need the steel plate that hold the rad not the rubber so much..and the splash well from the drivers side bed ( THE LITTLE PART FROM THE WHEEL WELL TUB TO THE BOTTOM OF THE FENDER) sorry caps) \

I'm just tearing into this so I may need more stuff as I get though today

thanx
jeff

vasquezmrysvll · 03-28-2009, 08:38 AM

i need the ignition switch spacer shipped to 95901? thanks

teeitup · 03-28-2009, 10:45 AM

bad421, I'll get a quote this weekend for you
gotwake, Yes I have both of those $20 shipped for pair, I know I have the four lower bracket bolts, but unsure if I have the upper one, but I'll look
Hottrucks, Jeff, I can cut it past the bend no problem $15 for pair, the upper 4 core brackets are not there, sorry. The bed splash pan is $10, so $25 plus shipping for what your asking about?
vasquezmrysvll, sorry it doesn't have a key in it for me to pull the ig switch. I could cut the whole switch out for you. $15 shipped?
Thanks let me know guys, I'm not going to be able to do much today, Sleeting, snowing and Wind is BLOWING hard today, Randy

Curbstone Mech · 03-28-2009, 11:09 AM

Randy=
How are the headlight trim rings?
Shipping to 21157?
Thanks!

teeitup · 03-28-2009, 04:08 PM

I'll have to check them out, I never looked at them. It will probably be Sun befoer I get out there. Thanks Randy

Hottrucks · 03-28-2009, 07:04 PM

thanx T cut it as far back as you dare and I'll take the splash pan too
let me know what shipping is I'll pm you my addy

thanx Jeff

teeitup · 03-28-2009, 09:21 PM

Hottrucks, Jeff, it will probably be Mon after work before I get out there to cut them off. Thanks Randy

Hottrucks · 03-29-2009, 08:18 AM

no biggie I'm not in a big rush

stope4 · 03-29-2009, 09:34 AM

Randy, if the dash isn't cut I am interested in the dash around the radio and ac.

teeitup · 03-29-2009, 10:03 AM

I think I may end up being out there today pulling a motor out of the 68, I'll try to look at everything everyone has asked about and hopefully have time to get some of the parts off.
Stope, this truck doesn't have AC on it? Wan't sure if you were needing one with AC or not?
Thanks Randy

teeitup · 03-29-2009, 09:05 PM

Curbstone, the driver side has a dent in lower middle and one on the outside lip and some surface rust, pass looks OK. $12 plus shipping for pair
Hottrucks, got your stuff off but I need to get a box to figure shipping, I'll do that Mon after work.
Stope4, its in good shape $15 plus shipping
Thanks let me know guys, Randy

stope4 · 03-29-2009, 10:24 PM

need one with ac. thanks

*MonteSS454* · 03-30-2009, 12:25 AM

Grille, surrounding trim and core support?

Condition of those and prices please. I'd pick up instead of shipping.

Hottrucks · 03-30-2009, 06:00 AM

t hold up a sec I just bought a parts truck yesterday so I need to se what it has on it I'll be picking it up wed eve
thanx Jeff

teeitup · 03-30-2009, 08:17 AM

stope4, I'll have one coming in a truck next week
MonteSS454, grill and surround is all dented up. Core support is pretty decent, I'll get pics later today of it all, $50 for it.
Hottrucks, thats fine just let me know
Thanks Randy

*MonteSS454* · 03-30-2009, 07:07 PM

Ok, thanks if the core is as good as you say I'll be pming you.

teeitup · 03-30-2009, 09:37 PM

Monte, here are some pics, part of the inner fender is still bolted to it on both sides. It has one spot where there is rust, see pic, it is not through. The area below the battery tray on the bottom side is pitted but not rusted through. Thanks let me know, Randy
1) whole support
2) drivers side top
3) driver side bottom
4) pass side top
5) Pass side bottom

teeitup · 03-30-2009, 09:39 PM

Here is the small rust area

teeitup · 03-30-2009, 09:41 PM

More parts

03-27-2009, 07:56 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	A 70 GMC now This is a 70 GMC C20, I will be parting it out as usual Ask questions in thread. Pay pal or money order. Thanks Randy Exhaust manifolds $50 plus shipping for pair-SOLD 4 speed high hump $25 plus shipping 4 speed steering column $40 plus shipping-SOLD V8 motor stands $30 shipped Good radiator support, $50 sale pending metal door panels, drivers has a couple small dings and a ring where the window crank rubbed, pass is is beat up bad $10 plus ship See anything else you may want ask and I'll price, Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 04-01-2009 at 08:57 PM.

03-27-2009, 08:08 PM	#2
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: A 70 GMC now would you consider clipping the header pipes out ( not the rams the acual pipes) with the clamp ring?? the E brake cables,and I need a upper radiator support hold down for a 4 core I have a 70 I'm trying to put together on a low budget thanx jeff __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html Last edited by Hottrucks; 03-27-2009 at 08:11 PM.

03-27-2009, 08:16 PM	#3
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,680	Re: A 70 GMC now Randy, I need a passenger door. I know you normally don't ship the heavy and or big parts, but I need a right door. Kerry __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

03-27-2009, 11:57 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: A 70 GMC now Hottrucks, how much of the exhaust pipes you needing? Sorry it doesn't have any E-brake cables on it. No upper 4 core mounts, I'll look and see if the lowers are there. Wootdog, Kerry, sorry I still don't mess with shipping doors Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-28-2009, 12:29 AM	#5
bad421 Registered User Join Date: Jan 2007 Location: Virginia Posts: 411	Re: A 70 GMC now how much would shipping on the 4spd column be to Va. 23061? thanks __________________ ASE MASTER TECH 1968 K10 LT1 350,SM420,T-221 lwb fleetSold 2007 Ford Ranger DD 2000 Ford F250SD V10 4x4 1968 Pontiac Firebird 468/TH400 current project 1991 Dodge W350 SRW CUMMINS POWERED Whole lotta fuel and a whole lotta Smoke

03-28-2009, 12:54 AM	#6
gottwake Registered User Join Date: Oct 2007 Location: Santa Clarita, CA Posts: 581	Re: A 70 GMC now Do you have these two parts? They are the Steering column front and support plates. Attached Images __________________ Blazer Project Last edited by gottwake; 03-28-2009 at 12:55 AM.

03-28-2009, 05:40 AM	#7
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: A 70 GMC now randy I would take as much as it has or is easy to get out I'm going to have to build a full exhaust anyway..I need the steel plate that hold the rad not the rubber so much..and the splash well from the drivers side bed ( THE LITTLE PART FROM THE WHEEL WELL TUB TO THE BOTTOM OF THE FENDER) sorry caps) \ I'm just tearing into this so I may need more stuff as I get though today thanx jeff __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

03-28-2009, 08:38 AM	#8
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: A 70 GMC now i need the ignition switch spacer shipped to 95901? thanks __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

03-28-2009, 10:45 AM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: A 70 GMC now bad421, I'll get a quote this weekend for you gotwake, Yes I have both of those $20 shipped for pair, I know I have the four lower bracket bolts, but unsure if I have the upper one, but I'll look Hottrucks, Jeff, I can cut it past the bend no problem $15 for pair, the upper 4 core brackets are not there, sorry. The bed splash pan is $10, so $25 plus shipping for what your asking about? vasquezmrysvll, sorry it doesn't have a key in it for me to pull the ig switch. I could cut the whole switch out for you. $15 shipped? Thanks let me know guys, I'm not going to be able to do much today, Sleeting, snowing and Wind is BLOWING hard today, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-28-2009, 11:09 AM	#10
Curbstone Mech Active Member Join Date: Feb 2000 Location: Carroll County Maryland Posts: 300	Re: A 70 GMC now Randy= How are the headlight trim rings? Shipping to 21157? Thanks! __________________ 68 short fleet 383 stroker, 700r4 373:1 posi 72 GMC 3/4 ton- weekly driver 700r4 351;1 posi

03-28-2009, 04:08 PM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: A 70 GMC now I'll have to check them out, I never looked at them. It will probably be Sun befoer I get out there. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-28-2009, 07:04 PM	#12
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: A 70 GMC now thanx T cut it as far back as you dare and I'll take the splash pan too let me know what shipping is I'll pm you my addy thanx Jeff __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

03-28-2009, 09:21 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: A 70 GMC now Hottrucks, Jeff, it will probably be Mon after work before I get out there to cut them off. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-29-2009, 08:18 AM	#14
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: A 70 GMC now no biggie I'm not in a big rush __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

03-29-2009, 09:34 AM	#15
stope4 Registered User Join Date: Jan 2006 Location: Houston Posts: 434	Re: A 70 GMC now Randy, if the dash isn't cut I am interested in the dash around the radio and ac.



Register or Log In To remove these advertisements.

03-29-2009, 10:03 AM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: A 70 GMC now I think I may end up being out there today pulling a motor out of the 68, I'll try to look at everything everyone has asked about and hopefully have time to get some of the parts off. Stope, this truck doesn't have AC on it? Wan't sure if you were needing one with AC or not? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 03-29-2009 at 10:04 AM.

03-29-2009, 09:05 PM	#17
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: A 70 GMC now Curbstone, the driver side has a dent in lower middle and one on the outside lip and some surface rust, pass looks OK. $12 plus shipping for pair Hottrucks, got your stuff off but I need to get a box to figure shipping, I'll do that Mon after work. Stope4, its in good shape $15 plus shipping Thanks let me know guys, Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 03-29-2009 at 09:06 PM.

03-29-2009, 10:24 PM	#18
stope4 Registered User Join Date: Jan 2006 Location: Houston Posts: 434	Re: A 70 GMC now need one with ac. thanks

03-30-2009, 12:25 AM	#19
MonteSS454 Account Suspended Join Date: Jun 2007 Location: Claremore, Oklahoma Posts: 821	Re: A 70 GMC now Grille, surrounding trim and core support? Condition of those and prices please. I'd pick up instead of shipping.

03-30-2009, 06:00 AM	#20
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: A 70 GMC now t hold up a sec I just bought a parts truck yesterday so I need to se what it has on it I'll be picking it up wed eve thanx Jeff __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

03-30-2009, 08:17 AM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: A 70 GMC now stope4, I'll have one coming in a truck next week MonteSS454, grill and surround is all dented up. Core support is pretty decent, I'll get pics later today of it all, $50 for it. Hottrucks, thats fine just let me know Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-30-2009, 07:07 PM	#22
MonteSS454 Account Suspended Join Date: Jun 2007 Location: Claremore, Oklahoma Posts: 821	Re: A 70 GMC now Ok, thanks if the core is as good as you say I'll be pming you.

03-30-2009, 09:37 PM	#23
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: A 70 GMC now Monte, here are some pics, part of the inner fender is still bolted to it on both sides. It has one spot where there is rust, see pic, it is not through. The area below the battery tray on the bottom side is pitted but not rusted through. Thanks let me know, Randy 1) whole support 2) drivers side top 3) driver side bottom 4) pass side top 5) Pass side bottom Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 03-30-2009 at 09:40 PM.

03-30-2009, 09:39 PM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: A 70 GMC now Here is the small rust area Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-30-2009, 09:41 PM	#25
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: A 70 GMC now More parts Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.