Parting a 71 blazer 4x4 now - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lugnut · 04-08-2009, 08:40 AM

Are you willing to part out the frame itself? i'm looking for this bracket for the parking brake cable. It is located on the drivers side, about in line with the transfer case. Holds the main cable coming out of the cab. Would be shipped to 58501

Jtrux · 04-08-2009, 10:23 PM

Can you do 35 shipped on the upper rad hose?

teeitup · 04-08-2009, 11:12 PM

litebulblsc, here is the shaft
lugnut, $15 shipped for it
jtrux, sorry I better stay at $30 plus shipping

teeitup · 04-08-2009, 11:14 PM

more stuff

teeitup · 04-08-2009, 11:16 PM

zzzzzzzzzzzzzzz

teeitup · 04-08-2009, 11:17 PM

xxxxxxxxxxxxxx

teeitup · 04-08-2009, 11:18 PM

cccccccccccc

teeitup · 04-08-2009, 11:19 PM

aaaaaaaaaaaa

**too much stuff** · 04-08-2009, 11:22 PM

Hi randy, the sport mirror brackets and gaskets up for grabs?

teeitup · 04-08-2009, 11:36 PM

Sure are Eric, $10 for the pair. Thanks Randy

**too much stuff** · 04-08-2009, 11:58 PM

If there are no problems with them, add them to my pile. Thanks randy!

teeitup · 04-09-2009, 12:11 AM

Just some surface rust and a little rough edges, screws came right out so threads are good. Mirrors were tight on the door. Thanks Randy

**bigdon-70blazer** · 04-09-2009, 07:23 AM

How much for antenna and mount?

teeitup · 04-09-2009, 08:08 AM

Don, $25 shipped for it. It has some light pitting on the base. Thanks Randy

RShaips · 04-09-2009, 09:53 AM

Hey Randy, This is Rich I bought a cab from you a couple of years ago, anyway that truck is gone and i now have a new project. I need a short throttle cable for a 4wd truck, also I need a piece cut out of the top bed rail section under the top of my Jimmy. I would guess that its the same as a truck bed. I need about 12 - 18" long and it only needs to come down the side about an inch or two. The Jimmy is almost rust free but there was a small dent in that area that must have let water get in and sit on the top rail. Let me know, Thanks

teeitup · 04-09-2009, 12:45 PM

HI Rich, did you buy that yellow Jimmy 4x4 that was over by St Louis, if you did it came from Ks, it was on ebay in Nov? I think I know the area your needing, I'll check this area on this blazer. I have a complete gas pedal and cable off this Blazer. Sorry I don't want to separate the cable. the cable looks OK but it does have a few frays on the end but still should work fine. I get $20 for the whole assembly. I'll check the bedside out. Thanks Randy

RShaips · 04-09-2009, 02:19 PM

Thats the one,I bought it from a young guy who bought it off ebay in November. He used it as his daily driver for 4-5 months untill I bought it. Real solid truck, only rust is that top rail and small spots in front floor corners. It needs the transmission rebuilt but other than that its good. I will probably take the cable since this has a long one on it, Let me know on the bed piece. thanks

teeitup · 04-09-2009, 08:16 PM

I was going to bid on it when it was on ebay, If it were a blazer I would of. Its in good shape for sure, I seen it was on Craigslist out your way.
Here is a section I cut off, my saw zaw locked up so I had to cut the lower part with a torch. $40 plus shipping for it and the gas pedal stuff. Thanks Randy

teeitup · 04-09-2009, 08:18 PM

Seat belt pics for Cap n Hook

RShaips · 04-09-2009, 08:31 PM

I am glad you didn't bid on it, or I wouldn't have it now! I want them both, tell me how you want to be paid my zip is 63332 Augusta Mo. Thanks

teeitup · 04-09-2009, 09:15 PM

I'm glad you got it, I was thinking real hard on it but we were on vacation when it ended so I passed. IT IS S NICE RIG!!! GREAT condition for our area. PM'd you total, Thanks so much, Randy

teeitup · 04-09-2009, 09:52 PM

Ok, I'm parting the frame and rest of body out, I'll be rolling the body off next week. I have everyones parts off an shipping prices PM'd to them except for the 205 adapter
SSOOOOOOOOOOOOO
under cab bucket seat brace $80 plus shipping (Trevor is first)
PS box frame bracket $40 plus shipping (72 cheyenne K20 is first)
anything else you need ask
Thanks Randy

**71blksuper4x4** · 04-09-2009, 10:01 PM

Randy, give me a day or so to think about that crossmember. I sent mine down to Texas to see about getting it repoed, but it might be unrepo-able. Trevor

Jtrux · 04-09-2009, 10:03 PM

I forgot that Critter is headed up there to pick up the top so can he pick up the coolant tube for me when he goes up. I'll paypal the money to you now and he can pick it up in a month or whenever he gets up there. Is that okay?? If so PM me your paypal.

teeitup · 04-09-2009, 10:10 PM

Trevor, thats fine just let me know, I'll probably cut it out tomorrow after work
Jtrux, sure no problem at all. I'll pm you info
Thanks Randy

04-08-2009, 08:40 AM	#126
lugnut Registered User Join Date: Feb 2003 Location: Bismarck, ND Posts: 118	Re: Parting a 71 blazer 4x4 now Are you willing to part out the frame itself? i'm looking for this bracket for the parking brake cable. It is located on the drivers side, about in line with the transfer case. Holds the main cable coming out of the cab. Would be shipped to 58501 Attached Images __________________ 1967 Chevrolet 1/2 ton 4x4 1972 GMC 1/2 ton 4x4 2005 1500 4x4 Suburban 2004 GMC Envoy 4x4 (wife's)

04-08-2009, 10:23 PM	#127
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Re: Parting a 71 blazer 4x4 now Can you do 35 shipped on the upper rad hose? __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!

04-08-2009, 11:12 PM	#128
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now litebulblsc, here is the shaft lugnut, $15 shipped for it jtrux, sorry I better stay at $30 plus shipping Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-08-2009, 11:14 PM	#129
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now more stuff Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-08-2009, 11:16 PM	#130
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now zzzzzzzzzzzzzzz Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-08-2009, 11:17 PM	#131
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now xxxxxxxxxxxxxx Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-08-2009, 11:18 PM	#132
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now cccccccccccc Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-08-2009, 11:19 PM	#133
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now aaaaaaaaaaaa Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-08-2009, 11:22 PM	#134
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Re: Parting a 71 blazer 4x4 now Hi randy, the sport mirror brackets and gaskets up for grabs? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-08-2009, 11:36 PM	#135
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now Sure are Eric, $10 for the pair. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-08-2009, 11:58 PM	#136
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Re: Parting a 71 blazer 4x4 now If there are no problems with them, add them to my pile. Thanks randy! __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-09-2009, 12:11 AM	#137
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now Just some surface rust and a little rough edges, screws came right out so threads are good. Mirrors were tight on the door. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-09-2009, 07:23 AM	#138
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: Parting a 71 blazer 4x4 now How much for antenna and mount?

04-09-2009, 08:08 AM	#139
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now Don, $25 shipped for it. It has some light pitting on the base. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-09-2009, 09:53 AM	#140
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Re: Parting a 71 blazer 4x4 now Hey Randy, This is Rich I bought a cab from you a couple of years ago, anyway that truck is gone and i now have a new project. I need a short throttle cable for a 4wd truck, also I need a piece cut out of the top bed rail section under the top of my Jimmy. I would guess that its the same as a truck bed. I need about 12 - 18" long and it only needs to come down the side about an inch or two. The Jimmy is almost rust free but there was a small dent in that area that must have let water get in and sit on the top rail. Let me know, Thanks



Register or Log In To remove these advertisements.

04-09-2009, 12:45 PM	#141
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now HI Rich, did you buy that yellow Jimmy 4x4 that was over by St Louis, if you did it came from Ks, it was on ebay in Nov? I think I know the area your needing, I'll check this area on this blazer. I have a complete gas pedal and cable off this Blazer. Sorry I don't want to separate the cable. the cable looks OK but it does have a few frays on the end but still should work fine. I get $20 for the whole assembly. I'll check the bedside out. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-09-2009, 02:19 PM	#142
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Re: Parting a 71 blazer 4x4 now Thats the one,I bought it from a young guy who bought it off ebay in November. He used it as his daily driver for 4-5 months untill I bought it. Real solid truck, only rust is that top rail and small spots in front floor corners. It needs the transmission rebuilt but other than that its good. I will probably take the cable since this has a long one on it, Let me know on the bed piece. thanks

04-09-2009, 08:16 PM	#143
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now I was going to bid on it when it was on ebay, If it were a blazer I would of. Its in good shape for sure, I seen it was on Craigslist out your way. Here is a section I cut off, my saw zaw locked up so I had to cut the lower part with a torch. $40 plus shipping for it and the gas pedal stuff. Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-09-2009, 08:18 PM	#144
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now Seat belt pics for Cap n Hook Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-09-2009, 08:31 PM	#145
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Re: Parting a 71 blazer 4x4 now I am glad you didn't bid on it, or I wouldn't have it now! I want them both, tell me how you want to be paid my zip is 63332 Augusta Mo. Thanks

04-09-2009, 09:15 PM	#146
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now I'm glad you got it, I was thinking real hard on it but we were on vacation when it ended so I passed. IT IS S NICE RIG!!! GREAT condition for our area. PM'd you total, Thanks so much, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-09-2009, 09:52 PM	#147
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now Ok, I'm parting the frame and rest of body out, I'll be rolling the body off next week. I have everyones parts off an shipping prices PM'd to them except for the 205 adapter SSOOOOOOOOOOOOO under cab bucket seat brace $80 plus shipping (Trevor is first) PS box frame bracket $40 plus shipping (72 cheyenne K20 is first) anything else you need ask Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 04-09-2009 at 09:53 PM.

04-09-2009, 10:01 PM	#148
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,155	Re: Parting a 71 blazer 4x4 now Randy, give me a day or so to think about that crossmember. I sent mine down to Texas to see about getting it repoed, but it might be unrepo-able. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

04-09-2009, 10:03 PM	#149
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Re: Parting a 71 blazer 4x4 now I forgot that Critter is headed up there to pick up the top so can he pick up the coolant tube for me when he goes up. I'll paypal the money to you now and he can pick it up in a month or whenever he gets up there. Is that okay?? If so PM me your paypal. __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!

04-09-2009, 10:10 PM	#150
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now Trevor, thats fine just let me know, I'll probably cut it out tomorrow after work Jtrux, sure no problem at all. I'll pm you info Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.