4D'S "63" GMC Build - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

4dranch · 05-15-2009, 12:29 PM

Quote:

Originally Posted by jason65

What are you talkin about? These trucks don't rattle.

My bad..
Jeff, does your tailgate dance and sing
while you are running down the road

joe231 · 05-15-2009, 12:41 PM

you could also use seat belt latches....

as far as rattles, you could drill the hole over-sized and put a rubber grommet in it to cushion the sliding bar

4dranch · 05-15-2009, 12:51 PM

Quote:

Originally Posted by joe231

you could also use seat belt latches....

as far as rattles, you could drill the hole over-sized and put a rubber grommet in it to cushion the sliding bar

That's just not a hat rack you got there is it Joe??....

Thanks

jason65 · 05-15-2009, 12:55 PM

I'd get the ones from mar-k. So when your haulin a load it can take it. I could see haulin something and the sheet metal screws ripping out.

joe231 · 05-15-2009, 12:55 PM

Jason, what screws?
weld those puppies on!

4dranch · 05-15-2009, 12:58 PM

Quote:

Originally Posted by joe231

Jason, what screws?
weld those puppies on!

I wouldn't be the only one on here with screws loose....
I do remember seeing the seat belts installed and I really thought that was a slick idea.

MacAttack · 05-15-2009, 01:04 PM

Good looking work, David!

And yes, real men's trucks rattle.

4dranch · 05-15-2009, 01:13 PM

Quote:

Originally Posted by MacAttack

Good looking work, David!

And yes, real men's trucks rattle.

I know Mac...Tell Jason

jason65 · 05-15-2009, 02:56 PM

Quote:

Originally Posted by 4dranch

I wouldn't be the only one on here with screws loose....
I do remember seeing the seat belts installed and I really thought that was a slick idea.

Was it 502tripower? I have seen the seatbelt thing before to.

protrash64 · 05-15-2009, 04:20 PM

Quote:

Originally Posted by 4dranch

My bad..
Jeff, does your tailgate dance and sing
while you are running down the road

No, it does not. I drilled the holes just barely larger than the pins and I have to lean on the gate to close it. It's tight. I know its hard to believe, but Im guessing that your tailgate isnt perfectly square...

...mines not. It 'naturally' holds itself in place.

Ive seen the seatbelt latches in a couple places, but the one I remember lately was Hillbilly Deluxe....I think.

joe231 · 05-15-2009, 05:24 PM

notice the truck I'm getting has no latches or chains
it has the seat belt latches

4dranch · 05-15-2009, 08:13 PM

Well it looks like I am going the smooth route..

Thanks guys. Ooh and Joe I hope you get your new truck as planned..

**scotts62** · 05-15-2009, 08:36 PM

Yeah not as planned....
I was hoping to get to see it today but they will get it fixed and to him

4dranch · 05-15-2009, 08:42 PM

Good things come to those who wait.......

**scotts62** · 05-15-2009, 08:50 PM

Very true, very true!

joe231 · 05-15-2009, 11:17 PM

Alan's Classic · 05-17-2009, 12:49 AM

Nice work on the cab!!

4dranch · 05-18-2009, 07:18 AM

Quote:

Originally Posted by Alan's Classic

Nice work on the cab!!

Thanks Alan.
really enjoy watching your build.

jason65 · 05-18-2009, 12:17 PM

Have you peeled the tape yet?

4dranch · 05-18-2009, 12:33 PM

Quote:

Originally Posted by jason65

Have you peeled the tape yet?

yeah we did.
and she said put it back the way it was.

But you gotta love the fact she is so into this like her old man..

jason65 · 05-18-2009, 12:40 PM

That will cost about a 6 pack.

4dranch · 05-18-2009, 01:10 PM

Quote:

Originally Posted by jason65

That will cost about a 6 pack.

She keeps my koolie full...

Strodder · 05-18-2009, 02:42 PM

My truck has the seat belt latches on the tail gate. I'll take a picture and post it.

4dranch · 05-19-2009, 10:57 AM

Quote:

Originally Posted by Strodder

My truck has the seat belt latches on the tail gate. I'll take a picture and post it.

Thanks, Dennis

4dranch · 05-19-2009, 11:02 AM

Quote:

Originally Posted by jason65

Have you peeled the tape yet?

I had to explain to my daughter and she saw how many flaws we have and that we are not ready for Gloss paint yet.

.So back to flat for now.
And I put on the ranch plate..

05-15-2009, 12:41 PM	#402
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 4D'S "63" GMC Build you could also use seat belt latches.... as far as rattles, you could drill the hole over-sized and put a rubber grommet in it to cushion the sliding bar __________________ *CHEVY ONLY* Last edited by joe231; 05-15-2009 at 12:43 PM.

05-15-2009, 12:55 PM	#404
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: 4D'S "63" GMC Build I'd get the ones from mar-k. So when your haulin a load it can take it. I could see haulin something and the sheet metal screws ripping out.

05-15-2009, 12:55 PM	#405
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 4D'S "63" GMC Build Jason, what screws? weld those puppies on! __________________ *CHEVY ONLY* Last edited by joe231; 05-15-2009 at 12:56 PM.

05-15-2009, 01:04 PM	#407
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: 4D'S "63" GMC Build Good looking work, David! And yes, real men's trucks rattle. __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

05-15-2009, 05:24 PM	#411
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 4D'S "63" GMC Build notice the truck I'm getting has no latches or chains it has the seat belt latches __________________ *CHEVY ONLY*

05-15-2009, 08:13 PM	#412
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build Well it looks like I am going the smooth route.. Thanks guys. Ooh and Joe I hope you get your new truck as planned.. __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

05-15-2009, 08:36 PM	#413
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: 4D'S "63" GMC Build Yeah not as planned.... I was hoping to get to see it today but they will get it fixed and to him __________________ Scott 93 crew cab build Project 62

05-15-2009, 08:42 PM	#414
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build Good things come to those who wait....... __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

05-15-2009, 08:50 PM	#415
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: 4D'S "63" GMC Build Very true, very true! __________________ Scott 93 crew cab build Project 62

05-15-2009, 11:17 PM	#416
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 4D'S "63" GMC Build __________________ *CHEVY ONLY*

05-17-2009, 12:49 AM	#417
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: 4D'S "63" GMC Build Nice work on the cab!! __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

05-18-2009, 12:17 PM	#419
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: 4D'S "63" GMC Build Have you peeled the tape yet?

05-18-2009, 12:40 PM	#421
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: 4D'S "63" GMC Build That will cost about a 6 pack.

05-18-2009, 02:42 PM	#423
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 4D'S "63" GMC Build My truck has the seat belt latches on the tail gate. I'll take a picture and post it. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.