Parting 72 GMC Grand Sierra 402 BB - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 05-20-2009, 12:05 PM

Kevin, sorry its been sold. Thanks Randy

superchevy · 05-20-2009, 08:24 PM

Randy, I'll take the grille. How much with shipping to me in Austin...78744?
SC

teeitup · 05-20-2009, 08:38 PM

Sorry I don't ship grills. Thanks Randy

teeitup · 05-20-2009, 08:43 PM

OK I got it all parted except for the bed, gas tanks, and the rest of the exhaust hangers.
Blazerman, Rob its a 3.54 in this one, I haven't got out to the old barn to check the longhorn yet
Guys I won't be shipping anything Fed Ex this week sorry. I should be able to get the quotes for everyone Thurs after work.
Thanks Randy

teeitup · 05-20-2009, 08:45 PM

7777777777777

teeitup · 05-20-2009, 08:46 PM

8888888

teeitup · 05-20-2009, 08:46 PM

99999999999

teeitup · 05-20-2009, 08:47 PM

bed pics for Ryan

**71blksuper4x4** · 05-20-2009, 10:26 PM

Randy, I will take the grille if you can hold that for me until I can make it up there again. I need to run a transfer case shifter to Jeff and I could up from there some night. What do the inner fenderwells look like rust wise? Trevor

teeitup · 05-20-2009, 10:32 PM

OK Trevor its yours. The inners aren't bad, the pass side has a little rust up there it mounts to the rad support, the dirver side has a spot at lower rear bolt. $30 for pair. I found the other bracket for the sliding rear window too, if you want the window I'd take $20 for it. Thanks Randy

**71blksuper4x4** · 05-20-2009, 11:34 PM

Randy, you mind holding the rear slider as well, I want to come take a look at it, I can really tell how it looks from the pics. I will try and get up there this week or weekend. Trevor

BYoung35 · 05-21-2009, 07:47 PM

Are those 73 up motor mount towers? They don't look like 67-72.

Redden05 · 05-21-2009, 10:29 PM

I am interested in the exhaust brackets. Are they all there? For both sides?

teeitup · 05-22-2009, 08:55 AM

Trevor, no problem I'll hold it for you
Byoung35, these are 72 only BB mounts, they resemble 73-up mounts but the holes on those are wider at the top.
David, It has 4 of them for sure that are factory, I'm not sure if the rear ones are or not. I'll try to get them all off this weekend and get a pic of them
Thanks Randy

Redden05 · 05-22-2009, 01:43 PM

Thanks Randy.

JustLiveIt · 05-22-2009, 04:19 PM

How much for the custom emblems shipped to 90710?

teeitup · 05-22-2009, 06:28 PM

justliveit, the one cutom emblem only has one stud, the other has all 3. $15 shipped for pair. Thanks Randy

JustLiveIt · 05-22-2009, 08:21 PM

ok I didn't know about the studs so i'll pass. good luck!

teeitup · 05-24-2009, 03:24 PM

Still have some of this stuff for sale, pics on previous pages
fan shroud $80 plus
heat shield pipe $80 plus
high hump $60 shipped
AC control $40 shipped and more
72 only big block motor stands $110 plus
inners $30 for pair, no ship
rad support $30
sway bar $40 plus
AT crossmember $25 plus
Steering column $40 plus
there is more I just can think what else is out there
Thanks Randy

teeitup · 05-24-2009, 03:34 PM

turbo 400 linkage $60 shipped
visore
seat belts
cig lighter set up
dash gauge setup
cab heat shield
and more
Thanks Randy

Arad68 · 05-24-2009, 03:38 PM

I'll take the fan shroud for $80 + shipping to 89031

Arad68 · 05-24-2009, 04:09 PM

Quote:

Originally Posted by teeitup

Still have some of this stuff for sale, pics on previous pages
fan shroud $80 plus
heat shield pipe $80 plus
high hump $60 shipped
AC control $40 shipped and more
72 only big block motor stands $110 plus
inners $30 for pair, no ship
rad support $30
sway bar $40 plus
AT crossmember $25 plus
Steering column $40 plus
there is more I just can think what else is out there
Thanks Randy

I'll buy that hump as well.

**88JRFAN** · 05-25-2009, 10:24 AM

Hey there Randy. Want would you want out of the rolling frame? Thanks, Daren

teeitup · 05-25-2009, 12:42 PM

Arad68, I'll get you a quote on shroud today, and get you total for everything.
Daren, let me see if Rob is wanting the rear first. I cut the front steering arm to get the PS box off, rest of frame looks pretty good. I'll pm Rob and ask him.
Thanks Randy

Redden05 · 05-25-2009, 01:16 PM

Did you ever get the exhaust brackets off?

05-20-2009, 12:05 PM	#76
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC Grand Sierra 402 BB Kevin, sorry its been sold. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-20-2009, 08:24 PM	#77
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Re: Parting 72 GMC Grand Sierra 402 BB Randy, I'll take the grille. How much with shipping to me in Austin...78744? SC __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

05-20-2009, 08:38 PM	#78
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC Grand Sierra 402 BB Sorry I don't ship grills. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-20-2009, 08:43 PM	#79
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC Grand Sierra 402 BB OK I got it all parted except for the bed, gas tanks, and the rest of the exhaust hangers. Blazerman, Rob its a 3.54 in this one, I haven't got out to the old barn to check the longhorn yet Guys I won't be shipping anything Fed Ex this week sorry. I should be able to get the quotes for everyone Thurs after work. Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-20-2009, 08:45 PM	#80
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC Grand Sierra 402 BB 7777777777777 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-20-2009, 08:46 PM	#81
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC Grand Sierra 402 BB 8888888 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-20-2009, 08:47 PM	#83
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC Grand Sierra 402 BB bed pics for Ryan Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-20-2009, 10:26 PM	#84
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,155	Re: Parting 72 GMC Grand Sierra 402 BB Randy, I will take the grille if you can hold that for me until I can make it up there again. I need to run a transfer case shifter to Jeff and I could up from there some night. What do the inner fenderwells look like rust wise? Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

05-20-2009, 10:32 PM	#85
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC Grand Sierra 402 BB OK Trevor its yours. The inners aren't bad, the pass side has a little rust up there it mounts to the rad support, the dirver side has a spot at lower rear bolt. $30 for pair. I found the other bracket for the sliding rear window too, if you want the window I'd take $20 for it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-20-2009, 11:34 PM	#86
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,155	Re: Parting 72 GMC Grand Sierra 402 BB Randy, you mind holding the rear slider as well, I want to come take a look at it, I can really tell how it looks from the pics. I will try and get up there this week or weekend. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

05-21-2009, 07:47 PM	#87
BYoung35 Registered User Join Date: Apr 2009 Location: Wright City ,Oklahoma Posts: 41	Re: Parting 72 GMC Grand Sierra 402 BB Are those 73 up motor mount towers? They don't look like 67-72.

05-21-2009, 10:29 PM	#88
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Parting 72 GMC Grand Sierra 402 BB I am interested in the exhaust brackets. Are they all there? For both sides?

05-22-2009, 08:55 AM	#89
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC Grand Sierra 402 BB Trevor, no problem I'll hold it for you Byoung35, these are 72 only BB mounts, they resemble 73-up mounts but the holes on those are wider at the top. David, It has 4 of them for sure that are factory, I'm not sure if the rear ones are or not. I'll try to get them all off this weekend and get a pic of them Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-22-2009, 01:43 PM	#90
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Parting 72 GMC Grand Sierra 402 BB Thanks Randy.

05-22-2009, 04:19 PM	#91
JustLiveIt Registered User Join Date: Nov 2005 Location: Los Angeles, Ca Posts: 135	Re: Parting 72 GMC Grand Sierra 402 BB How much for the custom emblems shipped to 90710? __________________ 1968 Chev SWB Fleet with GMC Clip and lots of 71-72 parts!



Register or Log In To remove these advertisements.

05-22-2009, 06:28 PM	#92
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC Grand Sierra 402 BB justliveit, the one cutom emblem only has one stud, the other has all 3. $15 shipped for pair. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-22-2009, 08:21 PM	#93
JustLiveIt Registered User Join Date: Nov 2005 Location: Los Angeles, Ca Posts: 135	Re: Parting 72 GMC Grand Sierra 402 BB ok I didn't know about the studs so i'll pass. good luck! __________________ 1968 Chev SWB Fleet with GMC Clip and lots of 71-72 parts!

05-24-2009, 03:24 PM	#94
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC Grand Sierra 402 BB Still have some of this stuff for sale, pics on previous pages fan shroud $80 plus heat shield pipe $80 plus high hump $60 shipped AC control $40 shipped and more 72 only big block motor stands $110 plus inners $30 for pair, no ship rad support $30 sway bar $40 plus AT crossmember $25 plus Steering column $40 plus there is more I just can think what else is out there Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 05-24-2009 at 03:28 PM.

05-24-2009, 03:34 PM	#95
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC Grand Sierra 402 BB turbo 400 linkage $60 shipped visore seat belts cig lighter set up dash gauge setup cab heat shield and more Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-24-2009, 03:38 PM	#96
Arad68 Trucks N Tranzams Join Date: Dec 2002 Location: North Las Vegas, Nevada Posts: 816	Re: Parting 72 GMC Grand Sierra 402 BB I'll take the fan shroud for $80 + shipping to 89031 __________________ Don '68 Chevy LB 383 TH400/GV/373 posi '56 Chevy 4WD SWB '64 Chevy short stepside '79 Trans Am 455/TH2004R/12blt/4whldisc 95 Kia (Wifes car) 2002 S-10 extended cab pickup "God punishes small sins immediately"

05-25-2009, 10:24 AM	#98
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: Parting 72 GMC Grand Sierra 402 BB Hey there Randy. Want would you want out of the rolling frame? Thanks, Daren __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM

05-25-2009, 12:42 PM	#99
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC Grand Sierra 402 BB Arad68, I'll get you a quote on shroud today, and get you total for everything. Daren, let me see if Rob is wanting the rear first. I cut the front steering arm to get the PS box off, rest of frame looks pretty good. I'll pm Rob and ask him. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-25-2009, 01:16 PM	#100
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Parting 72 GMC Grand Sierra 402 BB Did you ever get the exhaust brackets off?

Register or Log In To remove these advertisements.