How to mount voltage regulator - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1967C20 · 05-23-2009, 12:35 PM

I know this might be a dumb question but.....How does the voltage regulator mount on our trucks? I took the old one off about a year ago (the rubber mounts disintegrated while removing the bolts) and set it aside while I did other things. I ordered a mounting kit which came with 3 screws and 3 t-shaped rubber grommets about 3/4 inches long. I seem to remember the factory grommets being H-shaped (sandwiching the core support). Any one know how the new kit mounts or did I get the wrong part - DOH

1972SUPERSB · 12-31-2013, 12:26 AM

Old post but I am wondering about this myself. Can't seem to figure out how they mount. Thanks

cool68 · 12-31-2013, 01:02 AM

if new, hopefully, there should be instructions in box

1972SUPERSB · 12-31-2013, 01:07 AM

Regulator came with instructions but doesn't show how to mount the rubber insulators.

**FirstOwner69** · 12-31-2013, 01:26 AM

What you have is correct. The T-shaped grommets are actually well nuts. Put them into the holes in the core support from the engine side. They should be barely snug. Insert the screws through the regulator base and screw them into the well nuts. As you tighten them the well nuts expand.

1972SUPERSB · 12-31-2013, 01:33 AM

Quote:

Originally Posted by FirstOwner69

What you have is correct. The T-shaped grommets are actually well nuts. Put them into the holes in the core support from the engine side. They should be barely snug. Insert the screws through the regulator base and screw them into the well nuts. As you tighten them the well nuts expand.

Cool I will try that. Thanks

05-23-2009, 12:35 PM	#1
1967C20 Junior Member Join Date: Jun 2007 Location: China Grove, NC Posts: 122	How to mount voltage regulator I know this might be a dumb question but.....How does the voltage regulator mount on our trucks? I took the old one off about a year ago (the rubber mounts disintegrated while removing the bolts) and set it aside while I did other things. I ordered a mounting kit which came with 3 screws and 3 t-shaped rubber grommets about 3/4 inches long. I seem to remember the factory grommets being H-shaped (sandwiching the core support). Any one know how the new kit mounts or did I get the wrong part - DOH __________________ "A man's got to know his limitations." - Dirty Harry _______________________________________________ 1967 C20 Custom Camper, 327, Powerglide, PS, PB, No-Spin Locker

12-31-2013, 12:26 AM	#2
1972SUPERSB Registered User Join Date: Sep 2012 Location: San Antonio, TX Posts: 1,026	Re: How to mount voltage regulator Old post but I am wondering about this myself. Can't seem to figure out how they mount. Thanks __________________ Jeff 1972 Cheyenne Super SWB 350, Auto, Bucket Seats w/Console, Tach, Factory A/C, P/S ,P/B, Tilt 1998 Chevy 1500 Ext Cab 5.7, Pewter w/blue interior

12-31-2013, 01:02 AM	#3
cool68 Registered User Join Date: Oct 2013 Location: Stockton, CA Posts: 475	Re: How to mount voltage regulator if new, hopefully, there should be instructions in box

12-31-2013, 01:07 AM	#4
1972SUPERSB Registered User Join Date: Sep 2012 Location: San Antonio, TX Posts: 1,026	Re: How to mount voltage regulator Regulator came with instructions but doesn't show how to mount the rubber insulators. __________________ Jeff 1972 Cheyenne Super SWB 350, Auto, Bucket Seats w/Console, Tach, Factory A/C, P/S ,P/B, Tilt 1998 Chevy 1500 Ext Cab 5.7, Pewter w/blue interior

12-31-2013, 01:26 AM	#5
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,847	Re: How to mount voltage regulator What you have is correct. The T-shaped grommets are actually well nuts. Put them into the holes in the core support from the engine side. They should be barely snug. Insert the screws through the regulator base and screw them into the well nuts. As you tighten them the well nuts expand.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.