Parting 72 GMC Grand Sierra 402 BB - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 05-25-2009, 01:26 PM

Sorry not yet David, I ran out of Oxygen in my torch, I'll try to get some this week and get them off

**88JRFAN** · 05-25-2009, 04:03 PM

Not a problem Randy. Plans are to make a trailer out of it. Thanks, Daren

Redden05 · 05-25-2009, 08:57 PM

Quote:

Originally Posted by teeitup

Sorry not yet David, I ran out of Oxygen in my torch, I'll try to get some this week and get them off

Ok. There is no hurry. Thanks. David.

68chevyboy · 05-25-2009, 11:01 PM

Do you still have the bed, If so would you take $200 for it? Thanks Brad

teeitup · 05-26-2009, 06:44 AM

68chevyboy, I'm pretty sure its sold to Dieselwrencher, if not its still a $400 bed. Thanks Randy

*mrhino* · 05-26-2009, 08:04 AM

Randy, i saw you had the a/c housing off, did you ever get a shipping quote? is that rust holes in the picture? what did you want for it again? thanks mrhino.

wrapumup · 05-26-2009, 03:36 PM

Sent a pm, but thought I would write here also. Would you have a hand pull type parking brake assembly, like from the 67, 68's, not sure when they went to foot pedal. I could use a good chrome deal for my brake pedal. Might you have a good underdash wiring harness?

teeitup · 05-26-2009, 03:43 PM

Mrhino, yes it has some rust not bad but does have some, I was waiting to hear if you were still interested in it for sure. $30 plus shipping, I don't have a box right now but could find one if your still interested in it. I'd run to Topeka to hopefully find one, I'll get you a quote tonight just by measuring it without a box
wrapumup, sorry I don't have any of that stuff right now. I have a 72 bought but have not picked it up yet, it may have a good under dash wiring in it
Thanks Randy

"67"StepSide · 05-26-2009, 07:13 PM

randy, do you still have the centerlink??? If so I'll take it just let me know how much.. thanks john

teeitup · 05-26-2009, 08:11 PM

John, sorry I cut this center link with a torch. Thanks Randy

northern 85 · 05-26-2009, 08:36 PM

did the front sway bar sell? if not could i get a shipping quote to 04937.

teeitup · 05-26-2009, 08:41 PM

I still have it for sale, it needs new bushings. I can get a quote tomorrow after work. Thanks Randy

"67"StepSide · 05-26-2009, 08:44 PM

Ha ha!! I did the same thing like a dummy. I know you come across these all the time, I need a centerlink from a 71-72 disk brake truck. I know your very busy but if you come across one could you try to let me know pm or jsoby@att.net I can't always look through all the ads with word and all, I would really appreciate it. thanks alot john

northern 85 · 05-26-2009, 08:46 PM

Cool thanks.

teeitup · 05-27-2009, 04:17 PM

John, I'll watch for you one. I have a 72 bought but I have the whole front end sold already
Northern 85, total sent through PM to you
Thanks Randy

teeitup · 05-27-2009, 04:18 PM

Grill-SOLD
sliding rear window-SOLD
high hump-SOLD
Shroud-SOLD
Thanks Randy

Arad68 · 05-27-2009, 04:37 PM

Thanks Randy,
I'll let you know when the hump and shroud arrive.

teeitup · 05-27-2009, 04:41 PM

Don, Fed Ex picked them up today. THANKS SO MUCH
Pics of gas tanks for Scott
Thanks Randy

68,69 K20 · 05-27-2009, 05:55 PM

Randy, I've been looking for a good rear tail light harness for a longbed fleetside, let me know if you have one, thanks!

teeitup · 05-27-2009, 05:56 PM

Mike, I'll watch for you one, I had a good one but sold it a couple weeks ago. Thanks Randy

68,69 K20 · 05-27-2009, 05:59 PM

Sounds good Randy, let me know if you come across a decent one, I appreciate it...

Jimmyvato · 05-27-2009, 08:58 PM

Hi, will the power brake booster work for my 67 gmc 910?
It is not power but it sure could use the help with those drums, incl $ ship to Oshawa, Ont?
Thanks

teeitup · 05-27-2009, 09:06 PM

Jimmyvato, sorry this booster is sold already. Thanks Randy

**leddzepp** · 05-28-2009, 01:51 AM

Hey Randy- Thanks for the pics. I will take the tanks. PM/Payment sent. Thanks again, Scott

reefer55 · 05-28-2009, 08:16 PM

I'm looking for duct air selector and s duct in good shape no cracks. Pictures attached.

05-25-2009, 01:26 PM	#101
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC Grand Sierra 402 BB Sorry not yet David, I ran out of Oxygen in my torch, I'll try to get some this week and get them off __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-25-2009, 04:03 PM	#102
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: Parting 72 GMC Grand Sierra 402 BB Not a problem Randy. Plans are to make a trailer out of it. Thanks, Daren __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM

05-25-2009, 11:01 PM	#104
68chevyboy Registered User Join Date: Dec 2008 Location: Aurora Missouri Posts: 57	Re: Parting 72 GMC Grand Sierra 402 BB Do you still have the bed, If so would you take $200 for it? Thanks Brad

05-26-2009, 06:44 AM	#105
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC Grand Sierra 402 BB 68chevyboy, I'm pretty sure its sold to Dieselwrencher, if not its still a $400 bed. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-26-2009, 08:04 AM	#106
mrhino Account Suspended Join Date: Aug 2007 Location: USA Posts: 1,223	Re: Parting 72 GMC Grand Sierra 402 BB Randy, i saw you had the a/c housing off, did you ever get a shipping quote? is that rust holes in the picture? what did you want for it again? thanks mrhino.

05-26-2009, 03:36 PM	#107
wrapumup Junior Member Join Date: Mar 2006 Location: Missouri Posts: 113	Re: Parting 72 GMC Grand Sierra 402 BB Sent a pm, but thought I would write here also. Would you have a hand pull type parking brake assembly, like from the 67, 68's, not sure when they went to foot pedal. I could use a good chrome deal for my brake pedal. Might you have a good underdash wiring harness?

05-26-2009, 03:43 PM	#108
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC Grand Sierra 402 BB Mrhino, yes it has some rust not bad but does have some, I was waiting to hear if you were still interested in it for sure. $30 plus shipping, I don't have a box right now but could find one if your still interested in it. I'd run to Topeka to hopefully find one, I'll get you a quote tonight just by measuring it without a box wrapumup, sorry I don't have any of that stuff right now. I have a 72 bought but have not picked it up yet, it may have a good under dash wiring in it Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-26-2009, 07:13 PM	#109
"67"StepSide Junior Member Join Date: Oct 2005 Location: connecticut Posts: 263	Re: Parting 72 GMC Grand Sierra 402 BB randy, do you still have the centerlink??? If so I'll take it just let me know how much.. thanks john

05-26-2009, 08:11 PM	#110
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC Grand Sierra 402 BB John, sorry I cut this center link with a torch. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-26-2009, 08:36 PM	#111
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Parting 72 GMC Grand Sierra 402 BB did the front sway bar sell? if not could i get a shipping quote to 04937.

05-26-2009, 08:41 PM	#112
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC Grand Sierra 402 BB I still have it for sale, it needs new bushings. I can get a quote tomorrow after work. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-26-2009, 08:44 PM	#113
"67"StepSide Junior Member Join Date: Oct 2005 Location: connecticut Posts: 263	Re: Parting 72 GMC Grand Sierra 402 BB Ha ha!! I did the same thing like a dummy. I know you come across these all the time, I need a centerlink from a 71-72 disk brake truck. I know your very busy but if you come across one could you try to let me know pm or jsoby@att.net I can't always look through all the ads with word and all, I would really appreciate it. thanks alot john

05-26-2009, 08:46 PM	#114
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Parting 72 GMC Grand Sierra 402 BB Cool thanks.

05-27-2009, 04:17 PM	#115
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC Grand Sierra 402 BB John, I'll watch for you one. I have a 72 bought but I have the whole front end sold already Northern 85, total sent through PM to you Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-27-2009, 04:18 PM	#116
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC Grand Sierra 402 BB Grill-SOLD sliding rear window-SOLD high hump-SOLD Shroud-SOLD Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

05-27-2009, 04:37 PM	#117
Arad68 Trucks N Tranzams Join Date: Dec 2002 Location: North Las Vegas, Nevada Posts: 816	Re: Parting 72 GMC Grand Sierra 402 BB Thanks Randy, I'll let you know when the hump and shroud arrive. __________________ Don '68 Chevy LB 383 TH400/GV/373 posi '56 Chevy 4WD SWB '64 Chevy short stepside '79 Trans Am 455/TH2004R/12blt/4whldisc 95 Kia (Wifes car) 2002 S-10 extended cab pickup "God punishes small sins immediately"

05-27-2009, 04:41 PM	#118
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC Grand Sierra 402 BB Don, Fed Ex picked them up today. THANKS SO MUCH Pics of gas tanks for Scott Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 05-27-2009 at 04:42 PM.

05-27-2009, 05:55 PM	#119
68,69 K20 They call me the Breeze... Join Date: Jul 2007 Location: New York Posts: 2,251	Re: Parting 72 GMC Grand Sierra 402 BB Randy, I've been looking for a good rear tail light harness for a longbed fleetside, let me know if you have one, thanks! __________________ Mike 69 K20 "Beer is proof God loves us and wants us to be happy"....Ben Franklin

05-27-2009, 05:56 PM	#120
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC Grand Sierra 402 BB Mike, I'll watch for you one, I had a good one but sold it a couple weeks ago. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-27-2009, 05:59 PM	#121
68,69 K20 They call me the Breeze... Join Date: Jul 2007 Location: New York Posts: 2,251	Re: Parting 72 GMC Grand Sierra 402 BB Sounds good Randy, let me know if you come across a decent one, I appreciate it... __________________ Mike 69 K20 "Beer is proof God loves us and wants us to be happy"....Ben Franklin

05-27-2009, 08:58 PM	#122
Jimmyvato Registered User Join Date: Jan 2009 Location: Oshawa, Ontario Posts: 8	Re: Parting 72 GMC Grand Sierra 402 BB Hi, will the power brake booster work for my 67 gmc 910? It is not power but it sure could use the help with those drums, incl $ ship to Oshawa, Ont? Thanks

05-27-2009, 09:06 PM	#123
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 GMC Grand Sierra 402 BB Jimmyvato, sorry this booster is sold already. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-28-2009, 01:51 AM	#124
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,019	Re: Parting 72 GMC Grand Sierra 402 BB Hey Randy- Thanks for the pics. I will take the tanks. PM/Payment sent. Thanks again, Scott __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul Last edited by leddzepp; 05-28-2009 at 01:52 AM.

05-28-2009, 08:16 PM	#125
reefer55 Registered User Join Date: Oct 2008 Location: Edmonton, alberta, canada Posts: 189	Re: Parting 72 GMC Grand Sierra 402 BB I'm looking for duct air selector and s duct in good shape no cracks. Pictures attached. Attached Images

Register or Log In To remove these advertisements.