Wrong BB Engine Mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

eightbanger · 06-04-2009, 06:51 AM

A while back I found that Summit sold replacement mounts which from there photo looked like a match to mine, and only $4.95 each. So I sent pics of my mounts to Summit so there tech guy could compare mine with the ones they sell (just to be sure) and they confirmed they were a stock replacement. Yesterday I struggled to remove the worst mount on my truck ready to install my shiny new one from Summit and as soon as they where side by side it was plain to see they were not the same size...B*****ks. I have to really try and avoid things like this happening as i'm in the UK and sending these back would not be cost effective, not to mention all the added time and hassle.
So as I start a new hunt for new Engine Mounts, doe's anyone know what I should be specifically asking for to avoid this happening again.

eightbanger · 06-04-2009, 11:45 AM

Anyone know where I went wrong??

my67chevytruck · 06-04-2009, 11:51 AM

dont know where you went wrong, or where summit went wrong..... could you get by by elongating the holes, and using washers when bolting back in. I have heard of ppl getting them from Napa etc.

eightbanger · 06-04-2009, 12:05 PM

That was my first thought my67chevytruck.....after i'd kicked my ass up & down the street

but it's not just the holes, it's all wrong...height,lenght,width & size of the rubber cushion inside.

chevychase · 06-04-2009, 12:29 PM

Too bad they didn't work out, that would have been a killer deal. That sucks, those BB mounts can get a little pricey!

**425HP409** · 06-04-2009, 12:58 PM

Classic Industries shows the mount for your truck on their web catalog as #T83132, although their print catalog shows that number fitting 73 and later trucks. go to www.classicindustries.com and ask them if that number will work for your truck. LMC doesn't show it for your truck either. Year one shows GM original mounts for your truck, but doesn't show a picture of it online or in their catalog. If I find what you are looking for I will let you know.
Charles

**Classic Heartbeat** · 06-04-2009, 01:07 PM

I can get you a pair of Genuine GM motor mounts. They have been discontinued, but I have located about 6 of them. They are $90.00 each though. WES

my67chevytruck · 06-04-2009, 01:09 PM

Quote:

Originally Posted by eightbanger

That was my first thought my67chevytruck.....after i'd kicked my ass up & down the street

but it's not just the holes, it's all wrong...height,lenght,width & size of the rubber cushion inside.

would the clamshells happen to fit on top of those ? I know its a stretch....

eightbanger · 06-04-2009, 04:27 PM

Quote:

Originally Posted by 425HP409

Classic Industries shows the mount for your truck on their web catalog as #T83132, although their print catalog shows that number fitting 73 and later trucks. go to www.classicindustries.com and ask them if that number will work for your truck. LMC doesn't show it for your truck either. Year one shows GM original mounts for your truck, but doesn't show a picture of it online or in their catalog. If I find what you are looking for I will let you know.
Charles

I'll give them a ring Charles, just to make sure on the dimensions I hope they're right. It was the price tag at Summit that swayed me...Thanks mate.

Quote:

Originally Posted by Classic Heartbeat

I can get you a pair of Genuine GM motor mounts. They have been discontinued, but I have located about 6 of them. They are $90.00 each though. WES

Hey Wes, I am a sucker for original GM...but at $90 a pop and the shipping my wife will have my nuts in the blender

Quote:

Originally Posted by my67chevytruck

would the clamshells happen to fit on top of those ? I know its a stretch....

I think these things are all one unit and can't be broken up...thanks for the suggestions mate.

I'll go with Classic Parts, provided they are the same size....so if anybody wants a set of mounts?

**Classic Heartbeat** · 06-04-2009, 05:25 PM

The only reason that I suggested that is because you will probably find the same thing with most aftermarket mounts. I would hate to see you get the same thing again. WES

Dynomutt · 06-04-2009, 05:40 PM

Those are not like my BB mounts at all. What year are those for? My BB mounts are the 3 hole type just like the SB mounts and there in a 72. I don't have a clamshell or anything. Were there more than one type of mount for BB's?

71 super · 06-04-2009, 05:58 PM

Dynomutt you have 68-71 style mounts not correct for 72 model trucks, 72 uses the clam shell type simila to those found on 73 -up models.

my67chevytruck · 06-04-2009, 06:03 PM

[QUOTE=eightbanger;3343460]I'll give them a ring Charles, just to make sure on the dimensions I hope they're right. It was the price tag at Summit that swayed me...Thanks mate.

Hey Wes, I am a sucker for original GM...but at $90 a pop and the shipping my wife will have my nuts in the blender

I think these things are all one unit and can't be broken up...thanks for the suggestions mate.

I was referring to the clamshells that mount to the motor, was wondering if they would line up and bolt to the summit replacements

Dynomutt · 06-04-2009, 06:17 PM

Quote:

Originally Posted by 71 super

Dynomutt you have 68-71 style mounts not correct for 72 model trucks, 72 uses the clam shell type simila to those found on 73 -up models.

Thanks for the info. That explains a few things I've run into for sure. Now I gotta try to find the right stuff I guess.

Didn't mean to interupt the thread, thought I was helping.

06-04-2009, 06:51 AM	#1
eightbanger 454 MAKES IT ROAR Join Date: Jan 2008 Location: Essex, U.K Posts: 2,701	Wrong BB Engine Mounts A while back I found that Summit sold replacement mounts which from there photo looked like a match to mine, and only $4.95 each. So I sent pics of my mounts to Summit so there tech guy could compare mine with the ones they sell (just to be sure) and they confirmed they were a stock replacement. Yesterday I struggled to remove the worst mount on my truck ready to install my shiny new one from Summit and as soon as they where side by side it was plain to see they were not the same size...B*****ks. I have to really try and avoid things like this happening as i'm in the UK and sending these back would not be cost effective, not to mention all the added time and hassle. So as I start a new hunt for new Engine Mounts, doe's anyone know what I should be specifically asking for to avoid this happening again. __________________ Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger

06-04-2009, 11:45 AM	#2
eightbanger 454 MAKES IT ROAR Join Date: Jan 2008 Location: Essex, U.K Posts: 2,701	Re: Wrong BB Engine Mounts Anyone know where I went wrong?? __________________ Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger

06-04-2009, 11:51 AM	#3
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Wrong BB Engine Mounts dont know where you went wrong, or where summit went wrong..... could you get by by elongating the holes, and using washers when bolting back in. I have heard of ppl getting them from Napa etc. __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470 Last edited by my67chevytruck; 06-04-2009 at 11:52 AM.

06-04-2009, 12:05 PM	#4
eightbanger 454 MAKES IT ROAR Join Date: Jan 2008 Location: Essex, U.K Posts: 2,701	Re: Wrong BB Engine Mounts That was my first thought my67chevytruck.....after i'd kicked my ass up & down the street but it's not just the holes, it's all wrong...height,lenght,width & size of the rubber cushion inside. __________________ Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger

06-04-2009, 12:29 PM	#5
chevychase Registered User Join Date: Jun 2007 Location: Boca Raton, FL Posts: 476	Re: Wrong BB Engine Mounts Too bad they didn't work out, that would have been a killer deal. That sucks, those BB mounts can get a little pricey! __________________ Joe

06-04-2009, 12:58 PM	#6
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	Re: Wrong BB Engine Mounts Classic Industries shows the mount for your truck on their web catalog as #T83132, although their print catalog shows that number fitting 73 and later trucks. go to www.classicindustries.com and ask them if that number will work for your truck. LMC doesn't show it for your truck either. Year one shows GM original mounts for your truck, but doesn't show a picture of it online or in their catalog. If I find what you are looking for I will let you know. Charles

06-04-2009, 01:07 PM	#7
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,768	Re: Wrong BB Engine Mounts I can get you a pair of Genuine GM motor mounts. They have been discontinued, but I have located about 6 of them. They are $90.00 each though. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

06-04-2009, 05:25 PM	#10
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,768	Re: Wrong BB Engine Mounts The only reason that I suggested that is because you will probably find the same thing with most aftermarket mounts. I would hate to see you get the same thing again. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

06-04-2009, 05:40 PM	#11
Dynomutt Registered User Join Date: Mar 2009 Location: North Texas Posts: 440	Re: Wrong BB Engine Mounts Those are not like my BB mounts at all. What year are those for? My BB mounts are the 3 hole type just like the SB mounts and there in a 72. I don't have a clamshell or anything. Were there more than one type of mount for BB's? __________________ MARQ Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=446194

06-04-2009, 05:58 PM	#12
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,081	Re: Wrong BB Engine Mounts Dynomutt you have 68-71 style mounts not correct for 72 model trucks, 72 uses the clam shell type simila to those found on 73 -up models. __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

06-04-2009, 06:03 PM	#13
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Wrong BB Engine Mounts [QUOTE=eightbanger;3343460]I'll give them a ring Charles, just to make sure on the dimensions I hope they're right. It was the price tag at Summit that swayed me...Thanks mate. Hey Wes, I am a sucker for original GM...but at $90 a pop and the shipping my wife will have my nuts in the blender I think these things are all one unit and can't be broken up...thanks for the suggestions mate. I was referring to the clamshells that mount to the motor, was wondering if they would line up and bolt to the summit replacements __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.