Those with Coys!!! PICS PLEASE - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72BlckButy · 06-18-2009, 05:33 PM

Like I mentioned above, it will be in your best interest to take your truck to a local (reputable) tire/wheel shop and let them help get some accurate measurements for you. It can be a costly mistake....

For instance, check out this thread... link.

ctrow · 07-13-2009, 11:57 AM

I just ordered my set.

Got the gun metal with 20X8.5 (4 3/4" Backspacing) and 20X10 (5 1/2" Backspacing)

I'll be running 245/40 and 295/40 BFG tires also.

I think the 255/25 and 295/45 will be a bit tall.

***I'm running cool ride bags w/ CPP Modular spindles***

Below is a truck (not mine) I found running the same tire size I plan on using but on Torq Thrusts.

*vegaschevy* · 08-14-2009, 12:04 AM

back to the top for those who might not have seen it.

large tires on 20" wheels. What are you running? I would love ot know. I want to run a good size 255 tire up front and a 285/295 tire out back. i would prefer a 45 series tire but would do a 40 series.

gmcdude · 08-14-2009, 02:40 AM

Trying to figure out the picture posting process

crawdadfox · 08-14-2009, 08:02 AM

My old 72 with a 4" front 4 1/2" rear drop with 295/40/20 on 20x10's and 255/40/20 on a 20x8 1/2" up front.

CheyenneShop · 08-14-2009, 10:46 PM

CRAWDADFOX - that is one sick truck!

kingnothin_36 · 08-15-2009, 12:02 AM

Do you have to do any cutting to get the 20x10 wheels to fit in the rear? I want to do the same setup with mine. Thanks.

chuckmc8 · 08-15-2009, 04:44 AM

I like da red truck......

crawdadfox · 08-15-2009, 04:58 AM

Thanks guys! No cutting at all....just had to "clean up" the the hub area of the rotor and put a little beat down on the dust cap and they went right on. Side note the 295's on the 10" wheels looked huge on the back!

big_al_71 · 08-15-2009, 08:29 AM

Here is my truck as it sits today with the new drop 4/6 from ECE
18x8 235/50/18 4 1/2 back spacing and 20x10 rears 295/45/20 5 inch back space no issues at all...

**lolife99** · 08-15-2009, 09:08 AM

Quote:

Originally Posted by Hoffman65burb

coy's seem alot more expensive, for example a 20x8.5 Torque thrust gunmetal finish is 200 a wheel. Coy C-5 gunmetal finished is 275 a wheel... Am i looking at somthing different?

I'm not sure where you got that price,... but I think it is incorrect. The last time I checked Newstagia Wheels,... 20x8 TorqueThrusts were close to $450-$500 each.

fatboys69 · 08-15-2009, 01:59 PM

I have a Autocad file for a spacer for the center caps so you dont have to modify the front hubs or beat down the dust caps. Thickness needs to be
1/4" for the material. If anyone wants a copy just send me an email or PM me and I'll be more than happy to send it to you. I have sent several out allready to many other board members and they work great.

ebfabman · 08-15-2009, 03:32 PM

20x8.5 x 4

hemihead · 08-16-2009, 02:23 PM

Any one have a rear shot with the 295 rear tire??

*vegaschevy* · 08-16-2009, 03:26 PM

Quote:

Originally Posted by hemihead

Any one have a rear shot with the 295 rear tire??

good question!!! I too would like to see that

68laydout · 08-16-2009, 04:32 PM

My turd...currently redoing backhalf. 20x10's back with 295/40's and 18x8.5's up front. Want 20's up front.

big_al_71 · 08-16-2009, 04:46 PM

If you go to my buil thread there are picts of the 295 you are asking with a six inch drop thetire is just level with the bed arch

hemihead · 08-16-2009, 05:41 PM

Quote:

Originally Posted by big_al_71

If you go to my buil thread there are picts of the 295 you are asking with a six inch drop thetire is just level with the bed arch

Do you have a link?

big_al_71 · 08-16-2009, 08:44 PM

Quote:

Originally Posted by hemihead

Do you have a link?

http://www.67-72chevytrucks.com/vboa...15#post3434315

OldSkool71 · 08-16-2009, 09:33 PM

It's hard to believe that someone out there isn't running 20's all the way around on a 4/6 drop. Does it just not work well?

ebfabman · 08-17-2009, 07:46 AM

One more time. 20's 2.5 drop spindle one full coil cut in front 6inch drop spring in rear

Hoffman65burb · 08-17-2009, 12:08 PM

Great looking trucks, love the gun metal

Quote:

Originally Posted by lolife99

I'm not sure where you got that price,... but I think it is incorrect. The last time I checked Newstagia Wheels,... 20x8 TorqueThrusts were close to $450-$500 each.

I was looking at the summit prices, but they dont come in 5x5, the closest is 5x4.75, http://www.summitracing.com/parts/ARE-105M28561A/

Aarons72 · 08-17-2009, 03:41 PM

20x10 5.5 BS 275.35.20
20x8.5 5 BS 245.35.20

Most people don't go with 35 series but I like the look. Backspacing is fine but I would like the fronts pushed out a little bit more. The grinding of the hubs was not that bad but it was required and remember to paint your brakes and everything all up cause everything shows

**lolife99** · 08-17-2009, 06:14 PM

Quote:

Originally Posted by Hoffman65burb

Great looking trucks, love the gun metal

I was looking at the summit prices, but they dont come in 5x5, the closest is 5x4.75, http://www.summitracing.com/parts/ARE-105M28561A/

Oops,... I thought you were talking about AR's Torque Thrust II's (which is a 2-piece wheel). Those are the Torque Thrust-M's (which is a 1-piece wheel) available in the new Camaro and Mustang Backspacing. Sorry.

hemihead · 08-27-2009, 09:57 PM

Quote:

Originally Posted by Aarons72

20x10 5.5 BS 275.35.20
20x8.5 5 BS 245.35.20

Most people don't go with 35 series but I like the look. Backspacing is fine but I would like the fronts pushed out a little bit more. The grinding of the hubs was not that bad but it was required and remember to paint your brakes and everything all up cause everything shows

Anyone have a real close up picture of these wheels? Talked to Coys today....no longer carry the chrome with a 5" BS, can only get 5.5 BS. Has a shippment coming in mid Sept and says its 90% sold.

I decided to go with with these instead of the Foose wheels. Price was exactly the same. But you end up with more of a lip due to the fact yo can only get the Legends in a 6.25 BS (20x10's anyway)

Ill be ruuning 20x10 with a 5.5 BS and 295 40 and 20x8.5 with 4.75 BS and 255 45's.

Anyway if some one has some close ups that would be great.

06-18-2009, 05:33 PM	#26
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Those with Coys!!! PICS PLEASE Like I mentioned above, it will be in your best interest to take your truck to a local (reputable) tire/wheel shop and let them help get some accurate measurements for you. It can be a costly mistake.... For instance, check out this thread... link. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

07-13-2009, 11:57 AM	#27
ctrow New Member Join Date: May 2007 Location: OKC Posts: 204	Re: Those with Coys!!! PICS PLEASE I just ordered my set. Got the gun metal with 20X8.5 (4 3/4" Backspacing) and 20X10 (5 1/2" Backspacing) I'll be running 245/40 and 295/40 BFG tires also. I think the 255/25 and 295/45 will be a bit tall. *I'm running cool ride bags w/ CPP Modular spindles* Below is a truck (not mine) I found running the same tire size I plan on using but on Torq Thrusts. Attached Images

08-14-2009, 12:04 AM	#28
vegaschevy Account Suspended Join Date: May 2009 Location: las vegas nv Posts: 1,493	Re: Those with Coys!!! PICS PLEASE back to the top for those who might not have seen it. large tires on 20" wheels. What are you running? I would love ot know. I want to run a good size 255 tire up front and a 285/295 tire out back. i would prefer a 45 series tire but would do a 40 series.

08-14-2009, 02:40 AM	#29
gmcdude Registered User Join Date: Jul 2009 Location: Abingdon, Virginia Posts: 300	Re: Those with Coys!!! PICS PLEASE Trying to figure out the picture posting process Last edited by gmcdude; 08-14-2009 at 02:43 AM. Reason: no pic

08-14-2009, 08:02 AM	#30
crawdadfox Registered User Join Date: Aug 2008 Location: New Orleans Louisiana.....a great place to visit but you wouldn't want to live here!!! Posts: 883	Re: Those with Coys!!! PICS PLEASE My old 72 with a 4" front 4 1/2" rear drop with 295/40/20 on 20x10's and 255/40/20 on a 20x8 1/2" up front. Attached Images __________________ Down......with the sickness!!

08-14-2009, 10:46 PM	#31
CheyenneShop Registered User Join Date: Feb 2008 Location: Arizona Posts: 638	Re: Those with Coys!!! PICS PLEASE CRAWDADFOX - that is one sick truck! __________________ 72 Cheyenne shorty "*CheyLow" 72 3/4 long 4X4 69 SWB "Prospector" 68 C/10 shorty - "Picacho"* http://67-72chevytrucks.com/vboard/s...d.php?t=428379 *sold to "93redsled"* Have you heard about *C10 Talk? C10 Talk* is a podcast all about C10 Trucks, the builders, the vendors, and most importantly the C10 Community. Check us out online at www.c10talk.com

08-15-2009, 12:02 AM	#32
kingnothin_36 Registered User Join Date: Jun 2008 Location: New Orleans, LA Posts: 22	Re: Those with Coys!!! PICS PLEASE Do you have to do any cutting to get the 20x10 wheels to fit in the rear? I want to do the same setup with mine. Thanks.

08-15-2009, 04:44 AM	#33
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: Those with Coys!!! PICS PLEASE I like da red truck......

08-15-2009, 04:58 AM	#34
crawdadfox Registered User Join Date: Aug 2008 Location: New Orleans Louisiana.....a great place to visit but you wouldn't want to live here!!! Posts: 883	Re: Those with Coys!!! PICS PLEASE Thanks guys! No cutting at all....just had to "clean up" the the hub area of the rotor and put a little beat down on the dust cap and they went right on. Side note the 295's on the 10" wheels looked huge on the back! __________________ Down......with the sickness!! Last edited by crawdadfox; 08-15-2009 at 04:59 AM. Reason: crs

08-15-2009, 08:29 AM	#35
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Those with Coys!!! PICS PLEASE Here is my truck as it sits today with the new drop 4/6 from ECE 18x8 235/50/18 4 1/2 back spacing and 20x10 rears 295/45/20 5 inch back space no issues at all... Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild Last edited by big_al_71; 03-24-2010 at 02:49 PM.

08-15-2009, 01:59 PM	#37
fatboys69 Registered User Join Date: Aug 2006 Location: Dayton, Tennessee Posts: 447	Re: Those with Coys!!! PICS PLEASE I have a Autocad file for a spacer for the center caps so you dont have to modify the front hubs or beat down the dust caps. Thickness needs to be 1/4" for the material. If anyone wants a copy just send me an email or PM me and I'll be more than happy to send it to you. I have sent several out allready to many other board members and they work great.

08-15-2009, 03:32 PM	#38
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,489	Re: Those with Coys!!! PICS PLEASE 20x8.5 x 4 Attached Images

08-16-2009, 02:23 PM	#39
hemihead Registered User Join Date: Mar 2007 Location: Estevan, Sask, Canada Posts: 185	Re: Those with Coys!!! PICS PLEASE Any one have a rear shot with the 295 rear tire?? __________________ 1967 SWB C-10, BBC 454, T400, 3.73 posi, 20" Coys 1972 K5 Blazer, SBC 400, 4 spd, 3.73, 6" lift, 35" mud grapplers 2011 Sierra Denali HD, 6.6 L Duramax, RBP 96R rims, leveled and Nitto trail grapplers, 2009 Acura MDX

08-16-2009, 04:32 PM	#41
68laydout Junior Member Join Date: Jun 2006 Location: Frisco Tx Posts: 311	Re: Those with Coys!!! PICS PLEASE My turd...currently redoing backhalf. 20x10's back with 295/40's and 18x8.5's up front. Want 20's up front. Last edited by 68laydout; 08-16-2009 at 04:35 PM.

08-16-2009, 04:46 PM	#42
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Those with Coys!!! PICS PLEASE If you go to my buil thread there are picts of the 295 you are asking with a six inch drop thetire is just level with the bed arch __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild



Register or Log In To remove these advertisements.

08-16-2009, 09:33 PM	#45
OldSkool71 C/10 CLUB MEMBER Join Date: Jul 2003 Location: Lakewood, CA Posts: 993	Re: Those with Coys!!! PICS PLEASE It's hard to believe that someone out there isn't running 20's all the way around on a 4/6 drop. Does it just not work well? __________________ -Ron-

08-17-2009, 07:46 AM	#46
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,489	Re: Those with Coys!!! PICS PLEASE One more time. 20's 2.5 drop spindle one full coil cut in front 6inch drop spring in rear Attached Images

08-17-2009, 03:41 PM	#48
Aarons72 Registered User Join Date: Dec 2008 Location: Oregon City, Oregon Posts: 233	Re: Those with Coys!!! PICS PLEASE 20x10 5.5 BS 275.35.20 20x8.5 5 BS 245.35.20 Most people don't go with 35 series but I like the look. Backspacing is fine but I would like the fronts pushed out a little bit more. The grinding of the hubs was not that bad but it was required and remember to paint your brakes and everything all up cause everything shows __________________ Aaron Anderson 1971 GMC Burban - Daily 1962 Nova

Register or Log In To remove these advertisements.