Cab for patch panals - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**michael bustamante** · 07-09-2009, 12:39 PM

OK my cab has got to go!!! I got a sawzall so if any of you guys need parts, let me know. The dash is in great shape, windshield pillars are solid, floor is very solid, would like to seel the floor whole if anyones interested. the only bad parts are the rockers cab corners and the whole passenger side of the backside of cab(buckled from a wreck I guess. under the back glass) if you guys need any more pics let me know

ebfabman · 07-09-2009, 09:45 PM

Price???

**michael bustamante** · 07-10-2009, 09:03 AM

for the whole cab?? I was actually offering to cut out what you need and ship. This whole cab. . . Id say 150.00 but shipping would kill

STOCKISH · 07-10-2009, 05:23 PM

Road trip!!! Well worth the price.

**michael bustamante** · 07-11-2009, 11:24 AM

ttt
let me know what parts you guys need from this cab and ill throw you a price.

my67c20 · 07-11-2009, 08:57 PM

I have attached a picture of the area. It is roughly 10" down from the top of the window and 15" in from the edge and all the way back to the seam towards the rear of the roof. Inside and outside, including the pillar. Shipping to 53154. Ground. Thanks

**michael bustamante** · 07-11-2009, 10:49 PM

all that is solid on my truck and I can cut it out in the morning for you. 60.00 plus shipping. I would go greyhound. (but I can check fed ex too) is there a greyhound station around where you are?

**michael bustamante** · 07-12-2009, 03:39 PM

ttt.
I'll be posting more and better pics of the cab tomorrow, and I found a little rust thru spots on the floor after all >( right where the floor meets the kick panal both sides. all else is good

NORMSCOLORADO · 07-12-2009, 09:52 PM

hey man what would be a price on the whole floor pan including rockers and cab corners my 67 needs it bad! and cant afford a new one i can get some of the dents out thats no biggie

NORMSCOLORADO · 07-12-2009, 09:54 PM

oh and how about the doors the shiping would prolly be killer to NY 12941

**michael bustamante** · 07-13-2009, 09:45 AM

doors are gone man. sorry. as for the cab. my rockers are gone as well, cab corners are rotted out, the flor pan is all very good except for the very front where it meets the kick panals. rust is about 2 inches out. also the cab supports should be replaced. Id go 100.00 for the whole floor plus shipping. station to station greyhound if theyll take it. just let me know how far up the firewall you need

**michael bustamante** · 07-13-2009, 09:48 AM

My67c20: shipping would be about 23.00. let me know and Ill cut it out today after work

**michael bustamante** · 07-13-2009, 03:56 PM

more pics of the cab Im putting up for parts. the black splotch under the pedals is just left over tar paper, the only rust is where you can see I punced thru with a screwdriver on the floor by the kick panal, this is there is even less rust on the passenger side by the kick panal.

jeremy zander · 07-13-2009, 03:59 PM

How about the radio patch cluster with the ash tray? Looks like it is ok...can you get that out? have you seen these out before?how much would you want for it?

**michael bustamante** · 07-13-2009, 04:04 PM

I actuall rather sell the whole dash. but I know shipping might be alot. Let me see what I can do and I`ll PM you tomorrow

STINEY · 07-16-2009, 01:13 PM

PM'd you on the floor.

**michael bustamante** · 07-16-2009, 05:35 PM

stiney: floor is available Ill look into greyhound for shipping

**michael bustamante** · 07-23-2009, 10:42 AM

floor still aound 100.00 plus shipping

**michael bustamante** · 07-26-2009, 12:14 AM

ttt
still have most of the cab and the dash, floors etc

07-09-2009, 12:39 PM	#1
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Cab for patch panals OK my cab has got to go!!! I got a sawzall so if any of you guys need parts, let me know. The dash is in great shape, windshield pillars are solid, floor is very solid, would like to seel the floor whole if anyones interested. the only bad parts are the rockers cab corners and the whole passenger side of the backside of cab(buckled from a wreck I guess. under the back glass) if you guys need any more pics let me know Attached Images __________________ 1967custom

07-09-2009, 09:45 PM	#2
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,489	Re: Cab for patch panals Price???

07-10-2009, 09:03 AM	#3
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: Cab for patch panals for the whole cab?? I was actually offering to cut out what you need and ship. This whole cab. . . Id say 150.00 but shipping would kill __________________ 1967custom

07-10-2009, 05:23 PM	#4
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Cab for patch panals Road trip!!! Well worth the price. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

07-11-2009, 11:24 AM	#5
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: Cab for patch panals ttt let me know what parts you guys need from this cab and ill throw you a price. __________________ 1967custom

07-11-2009, 08:57 PM	#6
my67c20 Registered User Join Date: Jun 2002 Location: Tucson AZ by way of WI & CA Posts: 509	Re: Cab for patch panals I have attached a picture of the area. It is roughly 10" down from the top of the window and 15" in from the edge and all the way back to the seam towards the rear of the roof. Inside and outside, including the pillar. Shipping to 53154. Ground. Thanks Attached Images

07-11-2009, 10:49 PM	#7
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: Cab for patch panals all that is solid on my truck and I can cut it out in the morning for you. 60.00 plus shipping. I would go greyhound. (but I can check fed ex too) is there a greyhound station around where you are? __________________ 1967custom

07-12-2009, 03:39 PM	#8
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: Cab for patch panals ttt. I'll be posting more and better pics of the cab tomorrow, and I found a little rust thru spots on the floor after all >( right where the floor meets the kick panal both sides. all else is good __________________ 1967custom

07-12-2009, 09:52 PM	#9
NORMSCOLORADO Registered User Join Date: Oct 2008 Location: JAY, NY Posts: 176	Re: Cab for patch panals hey man what would be a price on the whole floor pan including rockers and cab corners my 67 needs it bad! and cant afford a new one i can get some of the dents out thats no biggie __________________ 04 Chevy Colorado Z71 4X4 76 Chevy C-10 Custom Deluxe (sold) 67 Chevy C-30 1 Ton 9' stepper 6.5 Turbo Diesel

07-12-2009, 09:54 PM	#10
NORMSCOLORADO Registered User Join Date: Oct 2008 Location: JAY, NY Posts: 176	Re: Cab for patch panals oh and how about the doors the shiping would prolly be killer to NY 12941 __________________ 04 Chevy Colorado Z71 4X4 76 Chevy C-10 Custom Deluxe (sold) 67 Chevy C-30 1 Ton 9' stepper 6.5 Turbo Diesel

07-13-2009, 09:45 AM	#11
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: Cab for patch panals doors are gone man. sorry. as for the cab. my rockers are gone as well, cab corners are rotted out, the flor pan is all very good except for the very front where it meets the kick panals. rust is about 2 inches out. also the cab supports should be replaced. Id go 100.00 for the whole floor plus shipping. station to station greyhound if theyll take it. just let me know how far up the firewall you need __________________ 1967custom Last edited by michael bustamante; 07-13-2009 at 09:47 AM.

07-13-2009, 09:48 AM	#12
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: Cab for patch panals My67c20: shipping would be about 23.00. let me know and Ill cut it out today after work Attached Images __________________ 1967custom Last edited by michael bustamante; 07-13-2009 at 10:02 AM. Reason: add pics

07-13-2009, 03:56 PM	#13
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: Cab for patch panals more pics of the cab Im putting up for parts. the black splotch under the pedals is just left over tar paper, the only rust is where you can see I punced thru with a screwdriver on the floor by the kick panal, this is there is even less rust on the passenger side by the kick panal. Attached Images __________________ 1967custom Last edited by michael bustamante; 07-13-2009 at 04:00 PM.

07-13-2009, 03:59 PM	#14
jeremy zander Registered User Join Date: Oct 2005 Location: shakopee minnesota Posts: 515	Re: Cab for patch panals How about the radio patch cluster with the ash tray? Looks like it is ok...can you get that out? have you seen these out before?how much would you want for it? __________________ WTB 1972 CHEVY 3/4 4X4 1971 chevy c30 4x4 NAPCO (project) 1972 chevy 3/4 4x4 350/350 4spd, tach, tow hooks,radio delete,heat delete,hubcaps,lockers 1972 chevy 3/4 4x4 383/350 dads original farm truck tilt,tach,tow hooks,hubcaps,radio delete,heat delete 2006 chevy LBZ crew cab duramax,4 inch,beadlocks 2015 chevy tahoe Z71 my fifth one,love em 2016 chevy 2500HD Z71 LTZ duramax midnite 2018 chevy suburban Z71 midnite

07-13-2009, 04:04 PM	#15
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: Cab for patch panals I actuall rather sell the whole dash. but I know shipping might be alot. Let me see what I can do and I`ll PM you tomorrow __________________ 1967custom



Register or Log In To remove these advertisements.

07-16-2009, 01:13 PM	#16
STINEY Registered User Join Date: May 2008 Location: Bucyrus Ohio Posts: 32	Re: Cab for patch panals PM'd you on the floor. __________________ Bucyrus, Ohio https://i.imgur.com/TeUPWqt.jpg

07-16-2009, 05:35 PM	#17
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: Cab for patch panals stiney: floor is available Ill look into greyhound for shipping __________________ 1967custom

07-23-2009, 10:42 AM	#18
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: Cab for patch panals floor still aound 100.00 plus shipping __________________ 1967custom

07-26-2009, 12:14 AM	#19
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: Cab for patch panals ttt still have most of the cab and the dash, floors etc __________________ 1967custom

Register or Log In To remove these advertisements.