WTB: Dropped Spindles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOTI · 07-09-2009, 10:04 PM

Looking for some used dropped spindles. 2.5-3" for the 1.25" HD rotor & I'm in the Dallas/Garland area.

mahanian · 07-10-2009, 01:19 AM

Quote:

Originally Posted by SCOTI

Looking for some used dropped spindles. 2.5-3" for the 1.25" HD rotor & I'm in the Dallas/Garland area.

I saw some on craigslist locally for 73-87 C10, is that the one that takes the HD rotor?

clos69 · 07-10-2009, 08:10 AM

I have a new set that I bought from CG. They are 2.5in drop for the 63-70 U/L control arms and take the 1.25 rotors.LMK if you are interested.

SCOTI · 07-10-2009, 08:17 AM

Quote:

Originally Posted by clos69

I have a new set that I bought from CG. They are 2.5in drop for the 63-70 U/L control arms and take the 1.25 rotors.LMK if you are interested.

Manufacturer & price?

clos69 · 07-10-2009, 08:23 AM

They are Western sold by CPP and will take $220obo. Here are some pics

SCOTI · 07-10-2009, 08:39 AM

Quote:

Originally Posted by clos69

They are Western sold by CPP and will take $220obo. Here are some pics

$175 this weekend.

clos69 · 07-10-2009, 09:31 AM

Quote:

Originally Posted by SCOTI

$175 this weekend.

Sorry no can do

......$200 if you pick them up or $220 and I can deliver halfway.. I am in south Fort Worth

SCOTI · 07-10-2009, 10:23 AM

I'll pass then.

Tx Firefighter · 07-10-2009, 12:30 PM

Scoti, I have a pair of Early Classic 2.5 inch spindles. They are for 63-70 ball joints and tie rod ends. They have the ECE 5 lug rotors, bearings, calipers, and hoses. I bought them new from ECE and used them for 4 years on my stepside truck before I parted it out.

I'd go 225 for the whole deal. I work in Hurst, so the drive wouldn't be too bad.

mahanian · 07-10-2009, 01:07 PM

Quote:

Originally Posted by Tx Firefighter

Scoti, I have a pair of Early Classic 2.5 inch spindles. They are for 63-70 ball joints and tie rod ends. They have the ECE 5 lug rotors, bearings, calipers, and hoses. I bought them new from ECE and used them for 4 years on my stepside truck before I parted it out.

I'd go 225 for the whole deal. I work in Hurst, so the drive wouldn't be too bad.

If Scoti passes I'd be interested depending on shipping costs...not trying to hyjack your thread though...

There is a company in Phx that sells new Western drop spindles for our trucks (63-70) for $199. If you are interested let me know and I'll get you their contact info. They are a big company (advertise in most truck magazines)

SCOTI · 07-10-2009, 01:07 PM

I've already got the calipers, rotors & backing plates from my 68. I used the spindles for 'testing' when I was working on the Budget Big Brake kits (we wanted to verifiy the 'kit' would work w/both stock & dropped spindles) which necessitated cutting of the OE caliper mounts.

That's a good deal but right now it would just be more parts I have to store (which I definitely don't need

). I would use my big brake spindles but I'm going w/some 'old-school' 15" wheels & the 13.4" brake components won't fit.

Tx Firefighter · 07-10-2009, 01:32 PM

I'd go 175 for the spindles alone.

Tx Firefighter · 07-10-2009, 01:33 PM

Quote:

Originally Posted by mahanian

If Scoti passes I'd be interested depending on shipping costs...not trying to hyjack your thread though...

There is a company in Phx that sells new Western drop spindles for our trucks (63-70) for $199. If you are interested let me know and I'll get you their contact info. They are a big company (advertise in most truck magazines)

Not really interested in packaging and shipping this stuff. It's incredibly heavy.

SCOTI · 07-10-2009, 02:06 PM

Quote:

Originally Posted by Tx Firefighter

I'd go 175 for the spindles alone.

I'll do that.

Tx Firefighter · 07-10-2009, 02:15 PM

You want me to bring them to work tomorrow in Hurst ? I work tomorrow then Tuesday next week.

SCOTI · 07-10-2009, 04:12 PM

Quote:

Originally Posted by Tx Firefighter

You want me to bring them to work tomorrow in Hurst ? I work tomorrow then Tuesday next week.

I know you're 24/on & 48/off type schedule & that the general public doesn't let you know too far in advance when they'll need you (

), what's the best 'time' to meet? That will factor into things tomorrow as we're having the 'sweet-sixteen' b-day festival for my GF's daughter so I imagine there will be more than one honey-do for me.

Tx Firefighter · 07-10-2009, 04:21 PM

I will send you a PM with the details.

SCOTI · 07-12-2009, 02:53 PM

Thanks again Tx.

Tx Firefighter · 07-12-2009, 05:53 PM

You bet man.

07-09-2009, 10:04 PM	#1
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,132	WTB: Dropped Spindles Looking for some used dropped spindles. 2.5-3" for the 1.25" HD rotor & I'm in the Dallas/Garland area. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-10-2009, 08:10 AM	#3
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: WTB: Dropped Spindles I have a new set that I bought from CG. They are 2.5in drop for the 63-70 U/L control arms and take the 1.25 rotors.LMK if you are interested. __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club* Last edited by clos69; 07-10-2009 at 08:11 AM.

07-10-2009, 08:23 AM	#5
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: WTB: Dropped Spindles They are Western sold by CPP and will take $220obo. Here are some pics __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

07-10-2009, 10:23 AM	#8
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,132	Re: WTB: Dropped Spindles I'll pass then. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-10-2009, 12:30 PM	#9
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: WTB: Dropped Spindles Scoti, I have a pair of Early Classic 2.5 inch spindles. They are for 63-70 ball joints and tie rod ends. They have the ECE 5 lug rotors, bearings, calipers, and hoses. I bought them new from ECE and used them for 4 years on my stepside truck before I parted it out. I'd go 225 for the whole deal. I work in Hurst, so the drive wouldn't be too bad. Attached Images __________________ I'm on the Instagram- @Gearhead_Kevin Last edited by Tx Firefighter; 07-10-2009 at 12:35 PM.

07-10-2009, 01:07 PM	#11
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,132	Re: WTB: Dropped Spindles I've already got the calipers, rotors & backing plates from my 68. I used the spindles for 'testing' when I was working on the Budget Big Brake kits (we wanted to verifiy the 'kit' would work w/both stock & dropped spindles) which necessitated cutting of the OE caliper mounts. That's a good deal but right now it would just be more parts I have to store (which I definitely don't need ). I would use my big brake spindles but I'm going w/some 'old-school' 15" wheels & the 13.4" brake components won't fit. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-10-2009, 01:32 PM	#12
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: WTB: Dropped Spindles I'd go 175 for the spindles alone. __________________ I'm on the Instagram- @Gearhead_Kevin

07-10-2009, 02:15 PM	#15
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: WTB: Dropped Spindles You want me to bring them to work tomorrow in Hurst ? I work tomorrow then Tuesday next week. __________________ I'm on the Instagram- @Gearhead_Kevin

07-10-2009, 04:21 PM	#17
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: WTB: Dropped Spindles I will send you a PM with the details. __________________ I'm on the Instagram- @Gearhead_Kevin

07-12-2009, 02:53 PM	#18
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,132	Re: WTB: Dropped Spindles Thanks again Tx. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-12-2009, 05:53 PM	#19
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: WTB: Dropped Spindles You bet man. __________________ I'm on the Instagram- @Gearhead_Kevin



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.