67-68 GMC Hubcaps - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Gazoo · 07-13-2009, 08:58 PM

Does anyone have a pic of a 67 or 68 GMC polished dog dish hub cap? I've seen some of the painted ones...but havent been able to put my eye on any stainless ones. Has anyone set these up on widened 8" or 10" rims?

**special-K** · 07-13-2009, 09:24 PM

I have a set I found this spring.I`ll see if I took any pictures.If not,I`ll dig them out and take one.I have a set of 5-lug 8 x 15s I`ll be using them with.

Gazoo · 07-14-2009, 02:54 PM

Great thx - as well, what year is what in terms of "over the nub" vs "under the nub" and how are the 3/4 ton caps different from the 1/2 tons?

factorystock · 07-14-2009, 07:11 PM

67-68 1/2 ton hubcaps with fit all wheels bumps, but 67-68 3/4 ton hubcaps only fit wheels with clips.

stllookn · 07-14-2009, 08:56 PM

These sit "proud" on the wheel since they are the clip style.

Gazoo · 07-15-2009, 10:03 AM

Stllookin.......That'ss precisely what I was getting to..... Very nice!!!!!! I assume that's a 10" rim?? Custom made? Now to find some .....

68gmsee · 07-15-2009, 10:33 AM

http://www.ehubcap.com/search_result...btnSearch.y=10

**special-K** · 07-15-2009, 01:26 PM

Does anyone know if the`66 style were made in outer nub style?

Here is my `67 GMC cap/8" wheel combo:

I found another set of 8 x 15 5-lugs at a local car show.Wasn`t prepared to buy anything,broke anyway.I gave the guy $20 to hold them hoping when my friend showed up he`d lend me $80.The guy said he`d take a check,so I`d use my grocery money to get them if I had to.I walked past him a while later and he flagged me down,handed me my twenty and said he measured them to double check and they were 5 on 5 1/2".I almost cried.

**special-K** · 07-16-2009, 10:37 PM

Quote:

Originally Posted by Gazoo

Stllookin.......That'ss precisely what I was getting to..... Very nice!!!!!! I assume that's a 10" rim?? Custom made? Now to find some .....

Hey,take a look.I got precisely what you wanted...GMC.

Is your truck a 1/2,3/4,or 1 ton?These are going on mt`67 Custom Wideside shortbed.

07-13-2009, 08:58 PM	#1
Gazoo Registered User Join Date: Aug 2005 Location: Fredericton, New Brunswick, Canada Posts: 63	67-68 GMC Hubcaps Does anyone have a pic of a 67 or 68 GMC polished dog dish hub cap? I've seen some of the painted ones...but havent been able to put my eye on any stainless ones. Has anyone set these up on widened 8" or 10" rims? __________________ 71 short fleetside

07-13-2009, 09:24 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 67-68 GMC Hubcaps I have a set I found this spring.I`ll see if I took any pictures.If not,I`ll dig them out and take one.I have a set of 5-lug 8 x 15s I`ll be using them with. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-14-2009, 02:54 PM	#3
Gazoo Registered User Join Date: Aug 2005 Location: Fredericton, New Brunswick, Canada Posts: 63	Re: 67-68 GMC Hubcaps Great thx - as well, what year is what in terms of "over the nub" vs "under the nub" and how are the 3/4 ton caps different from the 1/2 tons? __________________ 71 short fleetside

07-14-2009, 07:11 PM	#4
factorystock Registered User Join Date: Feb 2007 Location: west coast Posts: 3,396	Re: 67-68 GMC Hubcaps 67-68 1/2 ton hubcaps with fit all wheels bumps, but 67-68 3/4 ton hubcaps only fit wheels with clips.

07-14-2009, 08:56 PM	#5
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: 67-68 GMC Hubcaps These sit "proud" on the wheel since they are the clip style. Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

07-15-2009, 10:03 AM	#6
Gazoo Registered User Join Date: Aug 2005 Location: Fredericton, New Brunswick, Canada Posts: 63	Re: 67-68 GMC Hubcaps Stllookin.......That'ss precisely what I was getting to..... Very nice!!!!!! I assume that's a 10" rim?? Custom made? Now to find some ..... __________________ 71 short fleetside

07-15-2009, 10:33 AM	#7
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: 67-68 GMC Hubcaps http://www.ehubcap.com/search_result...btnSearch.y=10

07-15-2009, 01:26 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 67-68 GMC Hubcaps Does anyone know if the`66 style were made in outer nub style? Here is my `67 GMC cap/8" wheel combo: I found another set of 8 x 15 5-lugs at a local car show.Wasn`t prepared to buy anything,broke anyway.I gave the guy $20 to hold them hoping when my friend showed up he`d lend me $80.The guy said he`d take a check,so I`d use my grocery money to get them if I had to.I walked past him a while later and he flagged me down,handed me my twenty and said he measured them to double check and they were 5 on 5 1/2".I almost cried. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 07-15-2009 at 01:49 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.