parting out 2/1972 blazers - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 07-22-2009, 01:29 AM

the steering box brace is pending
the high hump cover is $55.00 shipped.
the eng. cross member $62.00 shipped.

badpeanut · 07-22-2009, 07:32 AM

I'm looking for rear pieces of the frame from the rear spring hanger rivets back (a little over 13" of length for each piece). I'd like a little of the spring hanger rivet holes left to use as a point of reference.

The one with no bumper doesn't look like it has the rear frame horns I'm looking for.

**jaros44sr** · 07-22-2009, 10:28 AM

Bill. are either of the windshield frames any good...friend of mine is looking for one

billsbowtie · 07-22-2009, 10:48 AM

badpeanut the one without the bumper rear frame has been cut . i think the other one has the bumper welded on i will check to see how hard it will be to take off. or if it can come off without damage.

billsbowtie · 07-22-2009, 10:50 AM

jaros44sr the dark green one is the better one. i will check it out closer but its to big to ship.

**71blksuper4x4** · 07-22-2009, 11:05 AM

bill, I forgot to ask, did you have the bracket off of the black blazer's a/c housing that is 4x4 specific, I am looking for one. It's the one that holds the cannister above to the side of the engine. Trevor

billsbowtie · 07-22-2009, 11:17 AM

the eng was gone when i got it. do you have a pic. of that part incase i run across it?

**jaros44sr** · 07-22-2009, 01:34 PM

Quote:

Originally Posted by billsbowtie

jaros44sr the dark green one is the better one. i will check it out closer but its to big to ship.

Let me know the condition when you get a chance. I'll let him deal with transportation

Do you have a sawsall?

billyecapps · 07-22-2009, 04:42 PM

Quote:

Originally Posted by billsbowtie

i have these f/s local also so some parts may be sold when you ask for them. let me know if you need something and i will price it. the dark green one is a/c the light green one is non a/c.
please reply in tread before you pm me.

Please give me a call, I would like to discuss the doors, quarters and top.
You can reach me at work during the week days 7-4 central time. I will
be out of the office this Friday. Office 931-839-5012 or cell phone anytime
931-979-6348.

Thanks,
Bill

portugee14 · 07-22-2009, 07:46 PM

Bill you have any parking lights for 71 72 that are in good shape. or any blazer door caps to cover up the part of door you cut off

billsbowtie · 07-22-2009, 09:24 PM

bill i will give you a call.
portugee14 i will have to check on the lights. i have 3 door caps $30.00 shipped.

billsbowtie · 07-22-2009, 09:28 PM

heres a pic. of the door caps. 1 has a hair line crack 1 is good 1 has a little ware.

billsbowtie · 07-22-2009, 09:33 PM

jaros44sr i have not checked it yet. i dont go anywhere without my sawzaw.

billsbowtie · 07-22-2009, 10:31 PM

heres the windshield frame it has some rust starting in the center.

**jaros44sr** · 07-23-2009, 12:25 AM

Quote:

Originally Posted by billsbowtie

heres the windshield frame it has some rust starting in the center.

I believe his is rusted more than that, can you get a closer shot of the rust. I will email him to see if he is interested...thanks for your time

IndianaK5 · 07-23-2009, 12:07 PM

I'm looking for the rear seat hold down brackets. I guess that is the best description, they go on the front round bars on the rear bench.

Also, looking for the brackets that attache the top to the body in the back at the tailgate/hatch area. Thanks

billsbowtie · 07-23-2009, 10:35 PM

jaros i will try to get another pic. soon.
indianak5 the seat brackets went with the seats. i will check on the other brackets you are talking about.

1949gmc · 07-23-2009, 10:52 PM

Would you have a good rear sill that you'd be willing to ship?

Name: 100_1166.jpg
Views: 184
Size: 44.5 KB

billsbowtie · 07-24-2009, 03:44 PM

1949gmc i don't have one off. i saw someone else on the board with one f/s. bill

billsbowtie · 07-25-2009, 09:01 AM

more pic.s of windshield frame.
indianak5 pm sent.

billsbowtie · 07-25-2009, 09:04 AM

billsbowtie · 07-25-2009, 09:05 AM

minime's 68' · 08-01-2009, 08:43 PM

How's the condition on the non ac heater box? I need one

8bolt · 08-01-2009, 09:28 PM

How are the wheel tubs are the bottom edges still good and will you ship to 55605 M.N. needed for my 69 wood bed .THANKS 8bolt.

billsbowtie · 08-01-2009, 10:07 PM

i think the heater box has a crack i will look again.
8bolt i was hoping someone takes the floor wheel wells and maybe the bed side all together it's all good shape. i have some wheel tubs/wells off of a truck . i will look for a pic.

07-22-2009, 01:29 AM	#26
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers the steering box brace is pending the high hump cover is $55.00 shipped. the eng. cross member $62.00 shipped. __________________ i have 67/72 chevy truck parts f/s. Last edited by billsbowtie; 07-22-2009 at 01:32 AM.

07-22-2009, 07:32 AM	#27
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,759	Re: parting out 2/1972 blazers I'm looking for rear pieces of the frame from the rear spring hanger rivets back (a little over 13" of length for each piece). I'd like a little of the spring hanger rivet holes left to use as a point of reference. The one with no bumper doesn't look like it has the rear frame horns I'm looking for. __________________ '05 Chevy 2500HD 4x4 '72 GMC LWB 4x2 driver '72 Chevy LWB 4x4 plow truck '71 Blazer 4x4 driver '70 GMC LWB trailer

07-22-2009, 10:28 AM	#28
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,761	Re: parting out 2/1972 blazers Bill. are either of the windshield frames any good...friend of mine is looking for one __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

07-22-2009, 10:48 AM	#29
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers badpeanut the one without the bumper rear frame has been cut . i think the other one has the bumper welded on i will check to see how hard it will be to take off. or if it can come off without damage. __________________ i have 67/72 chevy truck parts f/s.

07-22-2009, 10:50 AM	#30
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers jaros44sr the dark green one is the better one. i will check it out closer but its to big to ship. __________________ i have 67/72 chevy truck parts f/s.

07-22-2009, 11:05 AM	#31
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: parting out 2/1972 blazers bill, I forgot to ask, did you have the bracket off of the black blazer's a/c housing that is 4x4 specific, I am looking for one. It's the one that holds the cannister above to the side of the engine. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

07-22-2009, 11:17 AM	#32
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers the eng was gone when i got it. do you have a pic. of that part incase i run across it? __________________ i have 67/72 chevy truck parts f/s.

07-22-2009, 07:46 PM	#35
portugee14 Registered User Join Date: Nov 2007 Location: Hanford, Ca Posts: 29	Re: parting out 2/1972 blazers Bill you have any parking lights for 71 72 that are in good shape. or any blazer door caps to cover up the part of door you cut off

07-22-2009, 09:24 PM	#36
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers bill i will give you a call. portugee14 i will have to check on the lights. i have 3 door caps $30.00 shipped. __________________ i have 67/72 chevy truck parts f/s.

07-22-2009, 09:28 PM	#37
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers heres a pic. of the door caps. 1 has a hair line crack 1 is good 1 has a little ware. __________________ i have 67/72 chevy truck parts f/s.

07-22-2009, 09:33 PM	#38
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers jaros44sr i have not checked it yet. i dont go anywhere without my sawzaw. __________________ i have 67/72 chevy truck parts f/s.

07-22-2009, 10:31 PM	#39
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers heres the windshield frame it has some rust starting in the center. __________________ i have 67/72 chevy truck parts f/s.

07-23-2009, 12:07 PM	#41
IndianaK5 Registered User Join Date: Jul 2009 Location: Princeton IN Posts: 11	Re: parting out 2/1972 blazers I'm looking for the rear seat hold down brackets. I guess that is the best description, they go on the front round bars on the rear bench. Also, looking for the brackets that attache the top to the body in the back at the tailgate/hatch area. Thanks

07-23-2009, 10:35 PM	#42
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers jaros i will try to get another pic. soon. indianak5 the seat brackets went with the seats. i will check on the other brackets you are talking about. __________________ i have 67/72 chevy truck parts f/s.

07-23-2009, 10:52 PM	#43
1949gmc Registered User Join Date: Nov 2004 Location: Lindenhurst, IL Posts: 659	Re: parting out 2/1972 blazers Would you have a good rear sill that you'd be willing to ship?



Register or Log In To remove these advertisements.

07-24-2009, 03:44 PM	#44
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers 1949gmc i don't have one off. i saw someone else on the board with one f/s. bill __________________ i have 67/72 chevy truck parts f/s.

07-25-2009, 09:01 AM	#45
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers more pic.s of windshield frame. indianak5 pm sent. __________________ i have 67/72 chevy truck parts f/s.

07-25-2009, 09:04 AM	#46
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers __________________ i have 67/72 chevy truck parts f/s.

07-25-2009, 09:05 AM	#47
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers __________________ i have 67/72 chevy truck parts f/s.

08-01-2009, 08:43 PM	#48
minime's 68' Registered User Join Date: May 2007 Location: Utah Posts: 53	Re: parting out 2/1972 blazers How's the condition on the non ac heater box? I need one

08-01-2009, 09:28 PM	#49
8bolt Registered User Join Date: May 2005 Location: COLD COUNTY Posts: 168	Re: parting out 2/1972 blazers How are the wheel tubs are the bottom edges still good and will you ship to 55605 M.N. needed for my 69 wood bed .THANKS 8bolt.

08-01-2009, 10:07 PM	#50
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers i think the heater box has a crack i will look again. 8bolt i was hoping someone takes the floor wheel wells and maybe the bed side all together it's all good shape. i have some wheel tubs/wells off of a truck . i will look for a pic. __________________ i have 67/72 chevy truck parts f/s.

Register or Log In To remove these advertisements.