Radiator Assistance - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VanceH · 07-28-2009, 10:49 AM

Working on a 67 c10, had a 283 replaced with 350 out of a 1968. Went to use the 68 fan shroud and it wont fit?? 67 never had one. The 68 is stock as far as i can tell. So i grabed the 68 rad, and it is to long for the bottom rad support? Is there a differance in the 68 and 67 radiator support??

VanceH · 07-28-2009, 11:10 AM

Ok checking it further, there seems to be two sets of holes for the radiator on the passenger side. What is the differance? 67 is a 1/2 ton 68 is a 3/4 ton?

**Palf70Step** · 07-28-2009, 11:29 AM

The size of the raditor differs with the engine & options. I know my standard 2 core shroud does not fit my 4 core replacement radiator. I had to find a shoud from a HD or 3/4 core radiator. That may be the difference you are seeing. I am not sure or aware of a difference between years.

**CPNE** · 07-28-2009, 11:35 AM

I6 (narrow) vs V8 (Wider). That is why 2 set of mount holes on one side of core support

VanceH · 07-28-2009, 11:41 AM

ok that makes sence since the 67 had a v-6 originally. So with a 350 should you use the bigger rad? And can you get the bottom rad supports, and just change it over the next holes?

Thanks for the input

**CPNE** · 07-28-2009, 11:54 AM

Drill out the rivet and move it over and bolt back in. I just did this on a 67 rad support that was originally and I6 and is now cooling a big block 402 with a 4 core radiator. Note, I had to "modify" (read hack

)the lower supports for the 4 core and locate some 4 core upper hold downs since the originals were designed for the narrower 2 core

VanceH · 07-28-2009, 11:56 AM

Sweet thats what i am going to do!!! So many little changes on these darn things almost makes me crazy

07-28-2009, 10:49 AM	#1
VanceH Loving the Jimmster Join Date: Jun 2008 Location: Emmett, idaho Posts: 575	Radiator Assistance Working on a 67 c10, had a 283 replaced with 350 out of a 1968. Went to use the 68 fan shroud and it wont fit?? 67 never had one. The 68 is stock as far as i can tell. So i grabed the 68 rad, and it is to long for the bottom rad support? Is there a differance in the 68 and 67 radiator support??

07-28-2009, 11:10 AM	#2
VanceH Loving the Jimmster Join Date: Jun 2008 Location: Emmett, idaho Posts: 575	Re: Radiator Assistance Ok checking it further, there seems to be two sets of holes for the radiator on the passenger side. What is the differance? 67 is a 1/2 ton 68 is a 3/4 ton?

07-28-2009, 11:29 AM	#3
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,220	Re: Radiator Assistance The size of the raditor differs with the engine & options. I know my standard 2 core shroud does not fit my 4 core replacement radiator. I had to find a shoud from a HD or 3/4 core radiator. That may be the difference you are seeing. I am not sure or aware of a difference between years. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

07-28-2009, 11:35 AM	#4
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Re: Radiator Assistance I6 (narrow) vs V8 (Wider). That is why 2 set of mount holes on one side of core support __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

07-28-2009, 11:41 AM	#5
VanceH Loving the Jimmster Join Date: Jun 2008 Location: Emmett, idaho Posts: 575	Re: Radiator Assistance ok that makes sence since the 67 had a v-6 originally. So with a 350 should you use the bigger rad? And can you get the bottom rad supports, and just change it over the next holes? Thanks for the input

07-28-2009, 11:54 AM	#6
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Re: Radiator Assistance Drill out the rivet and move it over and bolt back in. I just did this on a 67 rad support that was originally and I6 and is now cooling a big block 402 with a 4 core radiator. Note, I had to "modify" (read hack )the lower supports for the 4 core and locate some 4 core upper hold downs since the originals were designed for the narrower 2 core __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all Last edited by CPNE; 07-28-2009 at 11:55 AM.

07-28-2009, 11:56 AM	#7
VanceH Loving the Jimmster Join Date: Jun 2008 Location: Emmett, idaho Posts: 575	Re: Radiator Assistance Sweet thats what i am going to do!!! So many little changes on these darn things almost makes me crazy



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.