19,000 mile I-250 ENGINE WITH A/C & P/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BCOWANWHEELS · 07-29-2009, 04:23 PM

ANYBODY INTERESTED IN A 19,000 ORIGINAL MILAGE 250 i-6 COMPLETE ENGINE ? IT HAS FACTORY POWER STEERING AND I HAVE A FACTORY DEALER ADD ON A/C SETUP KIT FOR IT THAT HAS NEVER BEEN INSTALLED. ITS IN A 1970 CHEVT 1/2 TON AND STILL IN THE TRUCK SO BUYER CAN DRIVE IT BEFORE BUYING IT. PRICE IS $2000.00 obo FOR COMPLETE ENGINE.
BOB

jsmithbm · 07-29-2009, 10:03 PM

Let me know if you part it, I dont think i would. But ya never know. I would like the carb and some other stuff.
Is there anyway you could take a few photos of the other side, i am trying to setup my power steering on my L6.
thanks

468BIGBLOCK · 07-30-2009, 09:29 AM

was that price a typo??

BCOWANWHEELS · 07-30-2009, 05:27 PM

I wont be parting it out and price is not a type-o. Where you gonna find a original 6 in this condition. Even a crate engine is higher than this and its not complete. This is a cherry. It cost over 1000.00 bucks to overhaul a long block then it will run hot unless you install a 3 core rad because the cylinder walls are thin. I,ve been into 6 cyls. For 30 yrs. This engine and a ( dodge gas engine ) nv4500 trans along with 3.73 gears would be sweet...

jsmithbm · 07-30-2009, 07:10 PM

Thanks B.

Crispyr1 · 07-30-2009, 07:21 PM

u said an a/c kit that hasn't been installed? will it fit the 292? how much?

BCOWANWHEELS · 07-30-2009, 10:12 PM

sorry but i dont want to part it out
crispyr1, what kind of 6 cyl parts do you need ? i have a bumch of them jsmithbm ?
pm me a list and i,ll see if i can hook you up reasonable.
bob

07-29-2009, 04:23 PM	#1
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	19,000 mile I-250 ENGINE WITH A/C & P/S ANYBODY INTERESTED IN A 19,000 ORIGINAL MILAGE 250 i-6 COMPLETE ENGINE ? IT HAS FACTORY POWER STEERING AND I HAVE A FACTORY DEALER ADD ON A/C SETUP KIT FOR IT THAT HAS NEVER BEEN INSTALLED. ITS IN A 1970 CHEVT 1/2 TON AND STILL IN THE TRUCK SO BUYER CAN DRIVE IT BEFORE BUYING IT. PRICE IS $2000.00 obo FOR COMPLETE ENGINE. BOB Attached Images __________________ I BELIEVE IN JOHN 3:16

07-29-2009, 10:03 PM	#2
jsmithbm Registered User Join Date: Jun 2009 Location: Newnan, GA Posts: 485	Re: 19,000 mile I-250 ENGINE WITH A/C & P/S Let me know if you part it, I dont think i would. But ya never know. I would like the carb and some other stuff. Is there anyway you could take a few photos of the other side, i am trying to setup my power steering on my L6. thanks __________________ Learning as I go! -------------------------------------

07-30-2009, 09:29 AM	#3
468BIGBLOCK MEMBER OF THE JUNK MAN CLUB Join Date: Jul 2001 Location: paragould arkansas 72450 Posts: 425	Re: 19,000 mile I-250 ENGINE WITH A/C & P/S was that price a typo?? __________________ I LIKE 67-72 CHEVYS, I HAVE OWNED OVER 150 OF THEM IN THE LAST 25 YEARS..

07-30-2009, 05:27 PM	#4
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: 19,000 mile I-250 ENGINE WITH A/C & P/S I wont be parting it out and price is not a type-o. Where you gonna find a original 6 in this condition. Even a crate engine is higher than this and its not complete. This is a cherry. It cost over 1000.00 bucks to overhaul a long block then it will run hot unless you install a 3 core rad because the cylinder walls are thin. I,ve been into 6 cyls. For 30 yrs. This engine and a ( dodge gas engine ) nv4500 trans along with 3.73 gears would be sweet... __________________ I BELIEVE IN JOHN 3:16

07-30-2009, 07:10 PM	#5
jsmithbm Registered User Join Date: Jun 2009 Location: Newnan, GA Posts: 485	Re: 19,000 mile I-250 ENGINE WITH A/C & P/S Thanks B. __________________ Learning as I go! -------------------------------------

07-30-2009, 07:21 PM	#6
Crispyr1 Registered User Join Date: Jul 2009 Location: Orange Park, FL Posts: 114	Re: 19,000 mile I-250 ENGINE WITH A/C & P/S u said an a/c kit that hasn't been installed? will it fit the 292? how much?

07-30-2009, 10:12 PM	#7
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: 19,000 mile I-250 ENGINE WITH A/C & P/S sorry but i dont want to part it out crispyr1, what kind of 6 cyl parts do you need ? i have a bumch of them jsmithbm ? pm me a list and i,ll see if i can hook you up reasonable. bob __________________ I BELIEVE IN JOHN 3:16



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.