Project Vitamin C-10 - Page 68 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**scotts62** · 08-06-2009, 05:04 PM

ouch

Strodder · 08-06-2009, 08:36 PM

Did someone say "pu$$y"?

ol Curt · 08-06-2009, 09:23 PM

Quote:

Originally Posted by Alan's Classic

Thanks Man

Thanks, it's 1969 Hugger Orange

Thanks for the picture of the bushings

The seat brackets are almost done. I bolted them to the seats, set the seats in place, aligned, then tacked in place. Finaly I drilled thru the bracket and floor 16 times. I will remove the tacks and clean up

This is what the bottom of the center seat looks like or use too.

Right now this is what it looks like. It got late last night and didn't finish the last leg. I just cut off the feet and turned them to the inside. There was some interfearance with the seats. I had to locate the center seat to the front somewhat because when I flipped the center seat back up it hit the back of the cab. After all of this i realized that the seat brackets probably weren't needed. I could have flipped the center seat brackets the way I did and just shortened them. The seats sat on the floor just fine without the center seat in. But with the seats being raised it made it more comfortable and more leg room. I felt like it was easier to reach the pedals. I've sat in another truck with these same seats and it was ackward driving it, by that I mean I felt like I had to lift my leg up when going from the gas to the brake.

Hey!!!! That looks like the damn seat out of my '00 Silverado. I'll be back in a minute. I need to go outside and check something........whew, still there!!!

Alan's Classic · 08-06-2009, 09:32 PM

Quote:

Originally Posted by ol Curt

Hey!!!! That looks like the damn seat out of my '00 Silverado. I'll be back in a minute. I need to go outside and check something........whew, still there!!!

Got to meet HD74 today. Wish we had somemore time to chew the fat. He picked up my 2 extra hoods.

Strodder · 08-06-2009, 09:50 PM

Hey Allan, you need to get some posters on your walls. Like mine.

Alan's Classic · 08-08-2009, 11:31 PM

Quote:

Originally Posted by ol Curt

Hey!!!! That looks like the damn seat out of my '00 Silverado. I'll be back in a minute. I need to go outside and check something........whew, still there!!!

Quote:

Originally Posted by Strodder

Hey Allan, you need to get some posters on your walls. Like mine.

Got to work on mine some tonight. After I spent most of the time lookin' for what I needed. Since I haven't worked on it in a while I couldn't remember where everything was. But, it finally came to me. Got the column back in and the steering shaft in. Not much but it's progress.

Damn that thing needs a bath.

greg65 · 08-08-2009, 11:39 PM

Looks good Alan. I would almost trade you an original automatic column for your's. If I ever get any free time from work and football practice I try to ride up and see what how the truck is coming along.

**scotts62** · 08-09-2009, 01:41 PM

Man thats looking good!

daverod · 08-11-2009, 01:57 PM

I was just reading your thread again. This picture cracks me up. It looks like your freezin your a$$ off.

Inverter · 08-11-2009, 02:33 PM

Man Alan,
Those are some beautiful little seat brackets.Very Streetrod,ish..
I taped on some temp. drop cloth windows/windshield to keep the dust out of my pile. It works..

Lookin good as always...the truck,I mean..

Alan's Classic · 08-11-2009, 09:00 PM

Quote:

Originally Posted by greg65

Looks good Alan. I would almost trade you an original automatic column for your's. If I ever get any free time from work and football practice I try to ride up and see what how the truck is coming along.

Not much has changed lately, just getting dustier. Come on when your ready.

Quote:

Originally Posted by scotts62

Man thats looking good!

Quote:

Originally Posted by daverod

I was just reading your thread again. This picture cracks me up. It looks like your freezin your a$$ off.

Maybe cause it was COLD!!!

The garage door was even open. My wife is wanting to move back up there something fierce. I've got so much crap to move.

Quote:

Originally Posted by Inverter

Man Alan,
Those are some beautiful little seat brackets.Very Streetrod,ish..
I taped on some temp. drop cloth windows/windshield to keep the dust out of my pile. It works..

Lookin good as always...the truck,I mean..

That's a great idea about taping the openings. Then I could see my favorite part of the truck, the dash.

Got the shifter rod hooked up last night. Then i realized I don't have a shift indicator. i realized it a while back then forgot about it. I might just un it without.

Back out to the shop I go.

Alan's Classic · 08-11-2009, 09:13 PM

Check this out. The wife wanted a new dinning room table. Couldn't afford it so we painted the old maple/white table. Still in work. She stained the top and I touched up with the airbrush and used my paint gun to spray polyurethane. She is happy so far. They really turn out good.

daverod · 08-11-2009, 09:18 PM

Quote:

Originally Posted by Alan's Classic

Check this out. The wife wanted a new dinning room table. Couldn't afford it so we painted the old maple/white table. Still in work. She stained the top and I touched up with the airbrush and used my paint gun to spray polyurethane. She is happy so far. They really turn out good.

Looks killer.

Can't even see the filler. Ya move, we could go sledding together, then you could put my truck together.

You'll get use to the cold. Bring that little stove you have in your shop you'll need it.

l

Strodder · 08-11-2009, 09:47 PM

Quote:

Originally Posted by Alan's Classic

Check this out. The wife wanted a new dinning room table. Couldn't afford it so we painted the old maple/white table. Still in work. She stained the top and I touched up with the airbrush and used my paint gun to spray polyurethane. She is happy so far. They really turn out good.

The table looks awesome.

Wish you had a picture of it before.

Alan's Classic · 08-11-2009, 10:08 PM

Quote:

Originally Posted by daverod

Looks killer.

Can't even see the filler. Ya move, we could go sledding together, then you could put my truck together.

You'll get use to the cold. Bring that little stove you have in your shop you'll need it.

l

Quote:

Originally Posted by Strodder

The table looks awesome.

Wish you had a picture of it before.

She wanted the color to match the detail in the floor.

Strodder · 08-11-2009, 10:11 PM

Quote:

Originally Posted by Alan's Classic

She wanted the color to match the detail in the floor.

WOW what a difference. Woman

But she's right. It will look better

Alan's Classic · 08-11-2009, 11:16 PM

Put new serpentine belt on and finish up the power steering hoses except for the fancy clamps.

Vintage Air condensor

Removed cross bars

Put grill and hood stricker on to check for clearance behind. It is a tight area where the fittings will be.

Spaced it up a little. I lowered it a little since I took this pic. I plan on reusing the crossbars and modify them to mount the condensor.

jonzcustomshop · 08-12-2009, 04:59 AM

Quote:

Originally Posted by Alan's Classic

[COLOR="Blue"]Maybe cause it was COLD!!!

The garage door was even open. My wife is wanting to move back up there something fierce. I've got so much crap to move.[/COLOR

wish you could visit in the summer, much nicer, and it was cold the week you picked to come : it froze, and was in the teens and negatives the whole week!

I was hoping we would trick you with one of our balmy late december/early januarys...Its usually only real nasty from late jan. to early feb.

4dranch · 08-12-2009, 06:47 AM

Dang Alan. Your truck looks good.

Ooh and I guess it's time for you to start another build thread for the house projects....

Table and kitchen turned out nice.

jason65 · 08-12-2009, 07:35 AM

Looks good Alan.

sdailey · 08-12-2009, 07:52 AM

I can see the sign now..............

Alan's Classic Car & Furniture Restorations

4dranch · 08-12-2009, 08:16 AM

Strodder · 08-12-2009, 09:34 AM

Quote:

Originally Posted by sdailey

I can see the sign now..............

Alan's Classic Car & Furniture Restorations

That will really keep you busy Allan

BTW looks good

MacAttack · 08-12-2009, 09:40 AM

That Vintage Air stuff is beautiful. Nothing like a massive condenser.

The compressor is very compact - the one out of my Chevelle, along with its torch-cut mounting bracket, weighed as much as a VW engine! I'd love to go with your set-up in my car, if it's adaptable to the 290 horse Chevy crate 350.

Mac.

daverod · 08-12-2009, 09:42 AM

Maybe with all the money from your new bussinesses you could buy a liner for your Army coat?

Brrrrrrrrrr.

08-06-2009, 05:04 PM	#1676
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: My 1965 build thread ouch __________________ Scott 93 crew cab build Project 62

08-06-2009, 08:36 PM	#1677
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: My 1965 build thread Did someone say "pu$$y"? __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

08-06-2009, 09:50 PM	#1680
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: My 1965 build thread Hey Allan, you need to get some posters on your walls. Like mine. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

08-08-2009, 11:39 PM	#1682
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: My 1965 build thread Looks good Alan. I would almost trade you an original automatic column for your's. If I ever get any free time from work and football practice I try to ride up and see what how the truck is coming along. __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653 Last edited by greg65; 08-08-2009 at 11:40 PM. Reason: correction

08-09-2009, 01:41 PM	#1683
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: My 1965 build thread Man thats looking good! __________________ Scott 93 crew cab build Project 62

08-11-2009, 01:57 PM	#1684
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: My 1965 build thread I was just reading your thread again. This picture cracks me up. It looks like your freezin your a$$ off. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

08-11-2009, 02:33 PM	#1685
Inverter Registered User Join Date: Mar 2007 Location: East Texas Posts: 429	Re: My 1965 build thread Man Alan, Those are some beautiful little seat brackets.Very Streetrod,ish.. I taped on some temp. drop cloth windows/windshield to keep the dust out of my pile. It works.. Lookin good as always...the truck,I mean.. __________________ TROY My work ~ https://www.67-72chevytrucks.com/vbo...d.php?t=799484 Last edited by Inverter; 08-11-2009 at 02:34 PM.

08-11-2009, 09:13 PM	#1687
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: My 1965 build thread Check this out. The wife wanted a new dinning room table. Couldn't afford it so we painted the old maple/white table. Still in work. She stained the top and I touched up with the airbrush and used my paint gun to spray polyurethane. She is happy so far. They really turn out good. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

08-11-2009, 11:16 PM	#1692
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: My 1965 build thread Put new serpentine belt on and finish up the power steering hoses except for the fancy clamps. Vintage Air condensor Removed cross bars Put grill and hood stricker on to check for clearance behind. It is a tight area where the fittings will be. Spaced it up a little. I lowered it a little since I took this pic. I plan on reusing the crossbars and modify them to mount the condensor. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

08-12-2009, 06:47 AM	#1694
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: My 1965 build thread Dang Alan. Your truck looks good. Ooh and I guess it's time for you to start another build thread for the house projects.... Table and kitchen turned out nice. __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q Last edited by 4dranch; 08-12-2009 at 06:47 AM.

08-12-2009, 07:35 AM	#1695
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: My 1965 build thread Looks good Alan.

08-12-2009, 07:52 AM	#1696
sdailey The Few, The Proud Join Date: Jun 2007 Location: Ball Ground, Georgia Posts: 1,830	Re: My 1965 build thread I can see the sign now.............. Alan's Classic Car & Furniture Restorations __________________ Shannon

08-12-2009, 08:16 AM	#1697
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: My 1965 build thread __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

08-12-2009, 09:40 AM	#1699
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: My 1965 build thread That Vintage Air stuff is beautiful. Nothing like a massive condenser. The compressor is very compact - the one out of my Chevelle, along with its torch-cut mounting bracket, weighed as much as a VW engine! I'd love to go with your set-up in my car, if it's adaptable to the 290 horse Chevy crate 350. Mac. __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

08-12-2009, 09:42 AM	#1700
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: My 1965 build thread Maybe with all the money from your new bussinesses you could buy a liner for your Army coat? Brrrrrrrrrr. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.