Bob's 1965 GMC build thread - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bob Magana · 08-16-2009, 09:16 PM

First off lemme start by saying this is by far the best truck forum i've been on! You guys and your threads make my day a work go by so slow because I want to go home and work on my truck. But then again, some of your threads make my day go faster (ie the hours I spent reading Alan's thread HAHA)

I have a 1965 GMC truck that my grandfather bought new! I have the receipt, I need to scan it to show you all. He owned until the late 1980s. During his time of owning the truck, he was in a crash in it (I dont know what damage was done to it because it is in great shape) and I have the newspaper article on the crash (no pic of the crash though). That happened in the late 60s. Then in 1979 he let a friend borrow it for a week and that guy blew the engine. That engine stayed in until I blew it.

My father was the next to own it. He used it as a daily driver to go from Santa Paula (my hometown) to Santa Barbara. Which I belive its a 45 mile trip one way. It then became stored under a carport at my parents house in 1997 and sort of became a trash can. It sat there until 2005 when I became the new owner of the truck!

I was living the next town over and decided to get it towed over there. One of the brake drums were lock. So we got it unlocked. Hammer!!. Then it sat for a year and I moved back to my hometown. The truck went back to my parents house. The engine wouldn't start. so I cleaned the fuel lines, replaced the vacuum advance line, and rebuilt the carb. Now it starts. I get it registered. Drive it around town with no problems!! I deiced to drive it to work. A 16 mile drive. On the way back home I start to hear a knocking. I knew what was going on! So I pull over and BOOM! I dont think I need to explain what it was.

Truck gets towed to my parents house where its sits. Im looking online for a new engine but everyone wants an arm and a leg for a inline six. My buddy asks me what was up with my truck. I told him I have no engine and He says he knows a guy with a stright 6 for $200. Which I had. I picked it up brought it home. And then sat for 6 more months

Which brings me to now, My buddy Mike and I are ready to do this! We're on a limited budget so and help on saving money it always appreciated! Plus we have very limited auto skills, so help there as well! I have quite a few pics of the last few days we've been working on it. So I have my pics on photobucket and the links go to a slide show of each day. Now with captions included!

DAY 1:link

DAY 2:link

DAY 3:link

DAY 4:link

Thanks guys! Long post and I'm sorry!

bubba327 · 08-16-2009, 09:58 PM

Hey-- a new thread- Looking good Thanks for the pictures Trucks that have been in the family are special so enjoy the project!

Bob Magana · 08-16-2009, 11:48 PM

Thanks Bubba! I know how this forum loves their pics. It means so much more when its in the family.

**Corts60** · 08-17-2009, 12:04 AM

Welcome Aboard from Astoria, OR!

Glad to see another GMC owner and, yes, it's always cooler to have a family truck that's been passed down. Just make sure one day that your kid gets it....

**Captainfab** · 08-17-2009, 12:43 AM

That's cool that the truck has been in your family since it was new. Not many people can say that.

Looks like you're already deep into tearing apart your truck. If you have any questions there's bound to be someone here that can help you.

Alan's Classic · 08-17-2009, 06:39 AM

and welcome aboard. Cool story and history. Stay focused by posting progress and letting us know if you need help.

Bob Magana · 08-17-2009, 01:41 PM

Thanks guys! You all rock!!

08-16-2009, 09:16 PM	#1
Bob Magana Registered User Join Date: Aug 2009 Location: Santa Paula, CA Posts: 14	Bob's 1965 GMC build thread First off lemme start by saying this is by far the best truck forum i've been on! You guys and your threads make my day a work go by so slow because I want to go home and work on my truck. But then again, some of your threads make my day go faster (ie the hours I spent reading Alan's thread HAHA) I have a 1965 GMC truck that my grandfather bought new! I have the receipt, I need to scan it to show you all. He owned until the late 1980s. During his time of owning the truck, he was in a crash in it (I dont know what damage was done to it because it is in great shape) and I have the newspaper article on the crash (no pic of the crash though). That happened in the late 60s. Then in 1979 he let a friend borrow it for a week and that guy blew the engine. That engine stayed in until I blew it. My father was the next to own it. He used it as a daily driver to go from Santa Paula (my hometown) to Santa Barbara. Which I belive its a 45 mile trip one way. It then became stored under a carport at my parents house in 1997 and sort of became a trash can. It sat there until 2005 when I became the new owner of the truck! I was living the next town over and decided to get it towed over there. One of the brake drums were lock. So we got it unlocked. Hammer!!. Then it sat for a year and I moved back to my hometown. The truck went back to my parents house. The engine wouldn't start. so I cleaned the fuel lines, replaced the vacuum advance line, and rebuilt the carb. Now it starts. I get it registered. Drive it around town with no problems!! I deiced to drive it to work. A 16 mile drive. On the way back home I start to hear a knocking. I knew what was going on! So I pull over and BOOM! I dont think I need to explain what it was. Truck gets towed to my parents house where its sits. Im looking online for a new engine but everyone wants an arm and a leg for a inline six. My buddy asks me what was up with my truck. I told him I have no engine and He says he knows a guy with a stright 6 for $200. Which I had. I picked it up brought it home. And then sat for 6 more months Which brings me to now, My buddy Mike and I are ready to do this! We're on a limited budget so and help on saving money it always appreciated! Plus we have very limited auto skills, so help there as well! I have quite a few pics of the last few days we've been working on it. So I have my pics on photobucket and the links go to a slide show of each day. Now with captions included! DAY 1:link DAY 2:link DAY 3:link DAY 4:link Thanks guys! Long post and I'm sorry! Last edited by Bob Magana; 08-16-2009 at 09:23 PM.

08-16-2009, 09:58 PM	#2
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Bob's 1965 GMC build thread Hey-- a new thread- Looking good Thanks for the pictures Trucks that have been in the family are special so enjoy the project! __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

08-16-2009, 11:48 PM	#3
Bob Magana Registered User Join Date: Aug 2009 Location: Santa Paula, CA Posts: 14	Re: Bob's 1965 GMC build thread Thanks Bubba! I know how this forum loves their pics. It means so much more when its in the family.

08-17-2009, 12:04 AM	#4
Corts60 Just here to tinker Join Date: Jun 2008 Location: Holland, MI Posts: 3,697	Re: Bob's 1965 GMC build thread Welcome Aboard from Astoria, OR! Glad to see another GMC owner and, yes, it's always cooler to have a family truck that's been passed down. Just make sure one day that your kid gets it.... __________________ 78 C10 SWB Diesel #1 (wrecked)http://67-72chevytrucks.com/vboard/s...1978+silverado 78 C10 SWB Diesel #2 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=650751 60 GMC Suburban (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=445526 60 GMC 1000 (sold)http://67-72chevytrucks.com/vboard/showthread.php?t=298235 67 GMC 1500 (sold) http://67-72chevytrucks.com/vboard/s...d.php?t=803695 73 Chevy C20(Daily)http://67-72chevytrucks.com/vboard/s...d.php?t=852767 86 Suburban(summer unit) http://67-72chevytrucks.com/vboard/s...d.php?t=810697 88 Suburban 4x4(sold)

08-17-2009, 12:43 AM	#5
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Bob's 1965 GMC build thread That's cool that the truck has been in your family since it was new. Not many people can say that. Looks like you're already deep into tearing apart your truck. If you have any questions there's bound to be someone here that can help you. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 08-17-2009 at 12:44 AM.

08-17-2009, 06:39 AM	#6
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Bob's 1965 GMC build thread and welcome aboard. Cool story and history. Stay focused by posting progress and letting us know if you need help. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

08-17-2009, 01:41 PM	#7
Bob Magana Registered User Join Date: Aug 2009 Location: Santa Paula, CA Posts: 14	Re: Bob's 1965 GMC build thread Thanks guys! You all rock!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.