Anyone mini tubbed a step side? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

laplander · 09-20-2009, 12:04 PM

I've been going thru the archives but can't find a pic of what I'm looking for. I've got a '67 short stepper that I want to mini tub, but all I'm finding are the fleetsides. I'd like to see how they attached the wheel tubs to the bedside and how it looks from inside the bed. Has anyone else done this?
Thanks.

low'n slow · 09-20-2009, 10:14 PM

I bought a 67 that the PO had bolted fleetside tubs in. It took up alot of bed space. I took them out and had a guy cut them down to about 4 inches. I didn't have a welder then and he did it cheap. It looked great. They bolt on through holes in the bedside.

laplander · 09-20-2009, 10:34 PM

Did you have a wood floor or metal? Mine has the wood and was wondering how to get them attached to that also. If you find some pics, that would be great.
Thanks.

low'n slow · 09-20-2009, 10:36 PM

Wood floor. You can bolt them on top of the floor just like they were on the metal bed. It will take a little more work to put the wood on top. Either way would look fine. Just decide which way it will be before you drill.

**special-K** · 09-20-2009, 10:41 PM

I never mini tubbed one.I back halved a`70 Stepside.The floor was steel from a Fleetside along with the wheel houses.It`s been sold for many tears and a don`t have pictures.I`d think you`d just cut the wood to fit.

09-20-2009, 12:04 PM	#1
laplander Registered User Join Date: Nov 2002 Location: NM Posts: 705	Anyone mini tubbed a step side? I've been going thru the archives but can't find a pic of what I'm looking for. I've got a '67 short stepper that I want to mini tub, but all I'm finding are the fleetsides. I'd like to see how they attached the wheel tubs to the bedside and how it looks from inside the bed. Has anyone else done this? Thanks.

09-20-2009, 10:14 PM	#2
low'n slow Too Dumb To Know Better Join Date: Nov 2005 Location: Texas Posts: 882	Re: Anyone mini tubbed a step side? I bought a 67 that the PO had bolted fleetside tubs in. It took up alot of bed space. I took them out and had a guy cut them down to about 4 inches. I didn't have a welder then and he did it cheap. It looked great. They bolt on through holes in the bedside. Last edited by low'n slow; 09-20-2009 at 10:19 PM.

09-20-2009, 10:34 PM	#3
laplander Registered User Join Date: Nov 2002 Location: NM Posts: 705	Re: Anyone mini tubbed a step side? Did you have a wood floor or metal? Mine has the wood and was wondering how to get them attached to that also. If you find some pics, that would be great. Thanks.

09-20-2009, 10:36 PM	#4
low'n slow Too Dumb To Know Better Join Date: Nov 2005 Location: Texas Posts: 882	Re: Anyone mini tubbed a step side? Wood floor. You can bolt them on top of the floor just like they were on the metal bed. It will take a little more work to put the wood on top. Either way would look fine. Just decide which way it will be before you drill.

09-20-2009, 10:41 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Anyone mini tubbed a step side? I never mini tubbed one.I back halved a`70 Stepside.The floor was steel from a Fleetside along with the wheel houses.It`s been sold for many tears and a don`t have pictures.I`d think you`d just cut the wood to fit. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.