Door ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

threeonthetree · 10-04-2009, 02:16 PM

i am looking at these doors on craigslist
why wont they fit a 1/2 passenger truck?
what are they worth?
http://wausau.craigslist.org/pts/1405881112.html

**Hart_Rod** · 10-04-2009, 02:25 PM

I didn't think there was a difference...

Stew215 · 10-04-2009, 02:28 PM

they look like regular 72 doors to me ... no sure what the value of the doors are

**LockDoc** · 10-04-2009, 02:29 PM

-
If you look at those doors you can see that the bottom front corner is cut off. This is to clear the front fenders on the big trucks.

LockDoc

**D.PASSMORE** · 10-04-2009, 02:31 PM

I believe the front lower edge is shaped differently than a standard C/K door.

Stew215 · 10-04-2009, 02:31 PM

wow i did not even notice that !

67ChevyRedneck · 10-04-2009, 02:32 PM

They are doors off of a "big truck." C40, C50, etc...

I think all you need to do is weld in some new metal for the front corner. You can see the front corners are missing in the pic. That was the cutout for the big trucks front fenders. That's the only real difference I've even noticed between the two.

Edit: I was typing while the others were posting

threeonthetree · 10-04-2009, 02:33 PM

thanks
i noticed that lock doc
now i see why he says they wouldn't compatible with a 1/2 ton

so could i weld a corner piece in and make them work?

EDIT:67chevyredneck answered my ? about welding a piece in as i was typing.

67ChevyRedneck · 10-04-2009, 02:36 PM

I think so? You would want an inner and outer patch so the front corner has the correct rigidity. Just a new outside skin would be too flimsy. Also so it would "look right" on the inside of the door.

threeonthetree · 10-04-2009, 02:40 PM

so what about the price
50 bucks for both
would that be a good offer or should i start lower?

**LockDoc** · 10-04-2009, 02:50 PM

Quote:

Originally Posted by threeonthetree

so what about the price
50 bucks for both
would that be a good offer or should i start lower?

I would start a little lower unless you can weld the corners on yourself. Be sure and turn them upside down and check where the metal is crimped over the bottom edge. Don't take his word for no rust.

LockDoc

unclewatts · 10-05-2009, 12:45 AM

Passenger truck? I've never heard of our trucks referred to in that way. For hauling passengers? Guy's weird.

10-04-2009, 02:16 PM	#1
threeonthetree Registered User Join Date: Feb 2009 Location: Wausau, WI Posts: 975	Door ? i am looking at these doors on craigslist why wont they fit a 1/2 passenger truck? what are they worth? http://wausau.craigslist.org/pts/1405881112.html __________________ Smoking Tires Since 1992 1969 c10 AKA SIN 1985 SSWB TRAZER (super short wheel base)

10-04-2009, 02:25 PM	#2
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Door ? I didn't think there was a difference... __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

10-04-2009, 02:28 PM	#3
Stew215 Registered User Join Date: Sep 2009 Location: Levittown , PA Posts: 55	Re: Door ? they look like regular 72 doors to me ... no sure what the value of the doors are __________________ 72 shortbed 396-sold 74 blazer 5.3 ls swap under construction

10-04-2009, 02:29 PM	#4
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,773	Re: Door ? - If you look at those doors you can see that the bottom front corner is cut off. This is to clear the front fenders on the big trucks. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

10-04-2009, 02:31 PM	#5
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: Door ? I believe the front lower edge is shaped differently than a standard C/K door.

10-04-2009, 02:31 PM	#6
Stew215 Registered User Join Date: Sep 2009 Location: Levittown , PA Posts: 55	Re: Door ? wow i did not even notice that ! __________________ 72 shortbed 396-sold 74 blazer 5.3 ls swap under construction

10-04-2009, 02:32 PM	#7
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Door ? They are doors off of a "big truck." C40, C50, etc... I think all you need to do is weld in some new metal for the front corner. You can see the front corners are missing in the pic. That was the cutout for the big trucks front fenders. That's the only real difference I've even noticed between the two. Edit: I was typing while the others were posting __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 10-04-2009 at 02:32 PM.

10-04-2009, 02:33 PM	#8
threeonthetree Registered User Join Date: Feb 2009 Location: Wausau, WI Posts: 975	Re: Door ? thanks i noticed that lock doc now i see why he says they wouldn't compatible with a 1/2 ton so could i weld a corner piece in and make them work? EDIT:67chevyredneck answered my ? about welding a piece in as i was typing. __________________ Smoking Tires Since 1992 1969 c10 AKA SIN 1985 SSWB TRAZER (super short wheel base) Last edited by threeonthetree; 10-04-2009 at 02:35 PM.

10-04-2009, 02:36 PM	#9
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Door ? I think so? You would want an inner and outer patch so the front corner has the correct rigidity. Just a new outside skin would be too flimsy. Also so it would "look right" on the inside of the door. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

10-04-2009, 02:40 PM	#10
threeonthetree Registered User Join Date: Feb 2009 Location: Wausau, WI Posts: 975	Re: Door ? so what about the price 50 bucks for both would that be a good offer or should i start lower? __________________ Smoking Tires Since 1992 1969 c10 AKA SIN 1985 SSWB TRAZER (super short wheel base)

10-05-2009, 12:45 AM	#12
unclewatts 70 Chevrolet=Obsession Join Date: Jun 2009 Location: nice ca Posts: 1,067	Re: Door ? Passenger truck? I've never heard of our trucks referred to in that way. For hauling passengers? Guy's weird. __________________ I'm Just like my truck. Old, Ugly and Grouchy. Except my truck starts easily in the morning and doesn't smoke! IT'S NOT EASY BEING GREEN! -Kermit the frog 1970 Chevrolet C-10 Longbed Stepside : 350, Muncie M20, 3.08 GM corp. positraction Forest green exterior/light green interior(Where all my money goes) 1996 Toyota Corolla (Parts runner)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.