lowering block ?s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

halfcockedcustoms · 10-05-2009, 11:53 AM

Is there any place other than cpp that sells lowering blocks for my 64,,it has 3 in springs already but its just not low enough,,I dont have the tools to make my own,,just wondering if anyone else sells them

Boomerswany · 10-05-2009, 11:55 AM

The Filling Station, they've got 1 1/2 and 2"...

**ChiefRocka** · 10-05-2009, 11:58 AM

Quote:

Originally Posted by halfcockedcustoms

Is there any place other than cpp that sells lowering blocks for my 64,,it has 3 in springs already but its just not low enough,,I dont have the tools to make my own,,just wondering if anyone else sells them

Make your own !!

xratt · 10-05-2009, 12:21 PM

I plan on making my own. Some 2inch square stock, drill a couple of holes. done!

terd ferguson · 10-05-2009, 01:00 PM

I used 3" square tubing. It's really pretty easy. All you need is the tubing, a cut off wheel, and a drill bit. You can get a cheap harbor freight grinder and a pack of cut off wheels for less than $20. You'll be in it cheaper than buying pre made blocks and you can do it yourself. Most folks have drills, I assume you do to. But if you don't, they're just as cheap.

jonzcustomshop · 10-05-2009, 01:31 PM

usually at a metal dealer you can get the metal , and they will cut it for you to whatever length you need
I would say, get 2X2X6X1/4 inch thick.

1Bad62Pro/Street · 10-05-2009, 02:33 PM

Lowering block kit
http://www.autozone.com/autozone/cat...questid=218372

terd ferguson · 10-05-2009, 04:59 PM

Quote:

Originally Posted by 1Bad62Pro/Street

Lowering block kit
http://www.autozone.com/autozone/cat...questid=218372

Auto Zone DOES NOT stock Ubolts that are the correct size. The Ubolts look very close to the right size, but no matter how much banging around you do with a hammer, they WILL NOT FIT. Don't spend $30 for an aggravating afternoon. Don't ask me how I know, lol.

I had some Ubolts custom made at a big truck shop. I took a stock Ubolt there and told them I wanted them 3" longer. They bent them and threaded them while I waited. It took about 15 minutes and cost $40. They came with nuts and washers.

1Bad62Pro/Street · 10-06-2009, 10:10 AM

The 2" U-Bolt lowering block kit worked fine for me. But I have a Ford 9" rear end.

halfcockedcustoms · 10-06-2009, 10:15 AM

most of these trucks have trailing arms not leaf springs,,,

1Bad62Pro/Street · 10-06-2009, 11:55 AM

Quote:

Originally Posted by halfcockedcustoms

most of these trucks have trailing arms not leaf springs,,,

Yep...
I guess what I should of mentioned is that it worked fine in my application.
Which is not stock at all.
My frame has been altered alot.

Ha ha.....
Well I was no help at all was I?
Sorry fellas.
I'll take a beating!

terd ferguson · 10-06-2009, 01:37 PM

Quote:

Originally Posted by 1Bad62Pro/Street

The 2" U-Bolt lowering block kit worked fine for me. But I have a Ford 9" rear end.

I should've said they don't work with stock rear ends.

terd ferguson · 10-06-2009, 01:38 PM

Quote:

Originally Posted by halfcockedcustoms

most of these trucks have trailing arms not leaf springs,,,

You can use blocks with trailing arms. I did.

Tx Firefighter · 10-06-2009, 02:46 PM

I wrote an FAQ article about making your own lowering blocks. If you care to read it, it's in the FAQ section. Lots of pictures.

Another easy way to make some blocks is to just cut the rear sections off of old trailing arms. Pre-made lowering blocks !

10-05-2009, 11:53 AM	#1
halfcockedcustoms Registered User Join Date: Aug 2009 Location: Rushville IL Posts: 117	lowering block ?s Is there any place other than cpp that sells lowering blocks for my 64,,it has 3 in springs already but its just not low enough,,I dont have the tools to make my own,,just wondering if anyone else sells them

10-05-2009, 11:55 AM	#2
Boomerswany Retiredoldfarttankerguy Join Date: Mar 2007 Location: Coeur d'Alene Idaho Posts: 148	Re: lowering block ?s The Filling Station, they've got 1 1/2 and 2"... __________________ ________________________________ *Swany* Current 67-72 truck projo - #5 of 6 and #1,000,000... of all the other things that keep me from working on it. Fav - local parts shop. They ship world-wide. www.fillingstation.com

10-05-2009, 12:21 PM	#4
xratt Registered User Join Date: May 2009 Location: Jacksonville, FL Posts: 131	Re: lowering block ?s I plan on making my own. Some 2inch square stock, drill a couple of holes. done! __________________ 1966 C10, SB305, bagged. 1955 VW Buggy, 2.0L 1978 Honda CB550 http://67-72chevytrucks.com/vboard/s...9&goto=newpost

10-05-2009, 01:00 PM	#5
terd ferguson Registered User Join Date: Mar 2009 Location: Concord, NC Posts: 531	Re: lowering block ?s I used 3" square tubing. It's really pretty easy. All you need is the tubing, a cut off wheel, and a drill bit. You can get a cheap harbor freight grinder and a pack of cut off wheels for less than $20. You'll be in it cheaper than buying pre made blocks and you can do it yourself. Most folks have drills, I assume you do to. But if you don't, they're just as cheap. __________________ "I never apologize. I'm sorry, but that's just the way I am." - Homer J. Simpson 1955 2nd Series Chevy "King Of Trucks"

10-05-2009, 01:31 PM	#6
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: lowering block ?s usually at a metal dealer you can get the metal , and they will cut it for you to whatever length you need I would say, get 2X2X6X1/4 inch thick.

10-05-2009, 02:33 PM	#7
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: lowering block ?s Lowering block kit http://www.autozone.com/autozone/cat...questid=218372 __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

10-06-2009, 10:10 AM	#9
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: lowering block ?s The 2" U-Bolt lowering block kit worked fine for me. But I have a Ford 9" rear end. __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

10-06-2009, 10:15 AM	#10
halfcockedcustoms Registered User Join Date: Aug 2009 Location: Rushville IL Posts: 117	Re: lowering block ?s most of these trucks have trailing arms not leaf springs,,,

10-06-2009, 02:46 PM	#14
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: lowering block ?s I wrote an FAQ article about making your own lowering blocks. If you care to read it, it's in the FAQ section. Lots of pictures. Another easy way to make some blocks is to just cut the rear sections off of old trailing arms. Pre-made lowering blocks ! __________________ I'm on the Instagram- @Gearhead_Kevin



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.