2009 aluminum fuel tank *group buy only*

[Daveboyd]

2009 Aluminum Fuel Tank Group Buy @ BOYDWELDING.COM

STANDARD TANK (NON-EFI) $299.00 + 39.00 SHIPPING
EFI TANKS $499.00 + 39.00 SHIPPING

OVERALL DIMENSIONS ARE 26.5 X 19 X 10 TAPERING TO 8 IN THE REAR

DRAWING OF THE EFI TANK WITH OPTIONAL 90 DEGREE FILL NECK


3D REPRESENTATION OF THE STANDARD (NON EFI) AND THE FITTING LOCATIONS WITH A STRAIGHT FILL PIPE W/CAP

HERE IS A VIDEO OF THE STANDARD TANK WITH FILL CAP NOTE: THE SENDER AND VENT LOCATIONS HAVE MOVED.

YouTube - 67 72 truck @ boydwelding.com

TERMS AND ALLOWABLE CHANGES

GENERAL TERMS
- So that i am able to offer these tanks at that price i cannot change the overall dimensions at all.
- all tanks will be built from .125 mill aluminum
- all tanks will have baffles (EFI tank baffles may be different)
-all tanks will be programmed and cut identical with fill pipe, sending unit flange and vent fitting locations locked in

FILL PIPE OPTIONS
- Straight filler neck w/cap. Height is standard at 3" but can be adjusted to suit your needs please specify.
-90 degree fill neck. available in 1.5" or 2" overall height on the 2" cannot be changed (I need the 1" clearance for welding)
- locations of those fillers on the tank cannot be changed

FITTING SIZE OPTIONS
-Vent, return, draw fittings can be whatever size needed but standard is .375 if not specified.

MOUNTING TABS
- all mounting tabs will come undrilled
- mounting tabs can be whatever location down from the top please specify.

TIME FRAME

I would like to get started on these around NOV 2ND but im flexible. fabrication times are normally 10-14 business days depending on the total number tanks will determine wether i can keep that schedule.

PAYMENT TERMS

Full payment is requred at time of purchase Nov 2nd or group decided date.


if there are any questions please ask.

[VA72C10]

I'm in

If I do the side fill on mine, have the side flange 3/4 higher so the tank fits flush, and take 1" off the bottom, would that change the pricing at all?

Also, any chance of me paying today or tomorrow to get mine produced as soon as you have time? I am ready for my tank as soon as I can get it.

Mine is carb setup...not EFI...

[Daveboyd]

Originally Posted by VA72C10

I'm in

If I do the side fill on mine, have the side flange 3/4 higher so the tank fits flush, and take 1" off the bottom, would that change the pricing at all?

Also, any chance of me paying today or tomorrow to get mine produced as soon as you have time? I am ready for my tank as soon as I can get it.

Mine is carb setup...not EFI...

I can place the side filler and move the mounts but you cannot change the tank dimensions.

I can build your tank whenever you are ready, however i cannot give you the group buy price.

[VA72C10]

Okay, I'll stick with the standard dimensions then...what's the soonest I could have a tank?

[Daveboyd]

Originally Posted by VA72C10

Okay, I'll stick with the standard dimensions then...what's the soonest I could have a tank?

production times are 10-14 business days so if ordered today your tank will ship nov 3rd

[soala70]

what gallon tank 18 or 20

[Daveboyd]

Originally Posted by soala70

what gallon tank 18 or 20

approx 19 gallons

[VA72C10]

I just got back in....I can paypal or pay by credit card...let me know what works for you. I want the carb tank with the mounts moved up 3/4", the side fill (has to be less than 3" above the top of the tank overall to fit) Thanks!

[95light]

You can put another person down and I'll paypal tonight after I do a few quick measurements. Quick question, can the fill neck be made to accept a fill hose instead of using a gas cap and can its dimensions vary (looking at maybe 1 1/2" to use a boat filler).

Thanks, Jeremy

[VA72C10]

Originally Posted by 95light

You can put another person down and I'll paypal tonight after I do a few quick measurements. Quick question, can the fill neck be made to accept a fill hose instead of using a gas cap and can its dimensions vary (looking at maybe 1 1/2" to use a boat filler).

Thanks, Jeremy

I just realized you had 2" spec'd...I would need 1 1/2" also for a side fill to work. I imagine anyone with the side fill would require 1 1/2

[Daveboyd]

Originally Posted by va72c10

i just realized you had 2" spec'd...i would need 1 1/2" also for a side fill to work. I imagine anyone with the side fill would require 1 1/2

no problem...

[Daveboyd]

SIDE NOTE:

Besides the gallons questions which answer is 19 gallons. all your questions for filler sizes and options have already been answered in post #1 of this thread please refer there first.

If you are ready to get moving on your tank before the group buy deadline. you can purchase this tank on my website for the regular price + shipping 24/7 here is a link. http://www.boydwelding.com/products.html#C6

if you are wanting to participate in the group buy please bump this thread and e-mail me your contact info so that i can get organized on my end.... email addy is daveboyd@boydwelding.com

Thanks,

[95light]

Originally Posted by Daveboyd

if you are wanting to participate in the group buy please bump this thread and e-mail me your contact info so that i can get organized on my end.... email addy is daveboyd@boydwelding.com

Thanks,

Sent you an email.

Thanks, Jeremy

[C20-67_N_MO]

Is there a sending unit and pickup included with the tanks?

Are these baffled tanks?

Do they include any mounting hardware?

Also could one be made with the filler tube in the center?

Thanks.

[Daveboyd]

Originally Posted by C20-67_N_MO

Is there a sending unit and pickup included with the tanks?

Are these baffled tanks?

Do they include any mounting hardware?

Also could one be made with the filler tube in the center?

Thanks.

answers in the order asked

1. we do not supply sending units, we do supply the mounting flange. there is a fuel supply fitting on the pass front corner refer to the second drawing in post #1. here are 2 sending units that will work with our sender.


240-33 ohms
- http://www.jcwhitney.com/UNIVERSAL_F...;N;2008885;0;0


0-90 ohm
- http://www.egauges.com/vdo_indS.asp?...90ohms&PN=SN38


2.Yes they are baffled please refer to post #1
3.We do not supply bolts
4 Yes I have 2 tanks in process as we speak with center fillers. send me a sketch showing how you would like it done.

[silver7]

Since there are no modifications to the posted tank dimensions it looks like I am out of the group buy. My space is 27" x 17" which means the 19" dimension won't fit. Don't understand why my space is different. This sucks.

[C20-67_N_MO]

I am dropping out as well.

[Daveboyd]

All of your modifications can be done for a great price. we custom build each tank to each order if these tanks dont fit your needs let me know what does and ill build it for you.

[texas67chevy]

I just measured my frame also and my dimensions are 27" side to side and 17" front to back... I guess whoever came up with the 19" front to back depth doesn't have the stock crossmembers back there??? Is everyone in the group buy gonna move their crossmember?

[Lightnin2699]

if you are wanting to participate in the group buy please bump this thread and e-mail me your contact info so that i can get organized on my end.... email addy is daveboyd@boydwelding.com

Thanks,[/QUOTE]


Just sent my email as well...

Thanks, Kyle

[silver7]

Dave, Would you be willing to do a separate group buy price for the stock dimensions texas67chevy and I come up with?

[Daveboyd]

Originally Posted by silver7

Dave, Would you be willing to do a separate group buy price for the stock dimensions texas67chevy and I come up with?

Yeah it looks as if the design is going to need to be modified to suit others needs. use the original designs and modify them to fit your needs.

[silver7]

Sweet. Thanks! I'll work with texas67chevy and come up with a design we both agree will work with a stock set-up.

[Lightnin2699]

Originally Posted by Daveboyd

Yeah it looks as if the design is going to need to be modified to suit others needs. use the original designs and modify them to fit your needs.

Hey Dave,
I sent an email on the 22nd and havent heard anything, just making sure you got it.
Thanks Kyle

[Daveboyd]

Originally Posted by Lightnin2699

Hey Dave,
I sent an email on the 22nd and havent heard anything, just making sure you got it.
Thanks Kyle

Yes i got it and sent a reply.