AL PARTING 70 BB 1 ton, posi - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JQ-72** · 10-17-2009, 12:13 PM

Well, I've decided to part the firetruck. This is a 12K mile original firetruck that was used at a large manufacturing plant. It was a Custom 30 - same as Longhorn frame. First off, I'm keeping the motor and trans. The doors and hood are already sold, but everything else is up for grabs! (I'm also keeping the glovebox door to add to my collection). Cab is pretty bad rusted. Grill is pristine, BUT has a huge hole cut in the middle of it for the pump shaft.

Rolling frame - 133". Very solid frame. Good brakes, factory TH400 trans. cross member, auxiliary rear spring, front stabilizer, and NoSpin 4.10. This is a Detroit locker rear with only 12K miles!! $700 for all.

Painted hub caps - no rust, a few dents that should push out from back side. $75.

Auto column - NICE, levers have light rust. $75

RED steering wheel. Really nice wheel - a few small stress cracks, but no gaping holes like most have. $75.

High hump trans cover - $50.

68-71 BB frame mounts - $75

70-72 HEAT STOVE! Rare item - includes pipe and housing. $200.

I'll add more pictures later. All above prices + shipping. You can figure shipping from Killen, AL 35645 to get a ball park figure. No shipping on large parts. Anything else you see, just ask. Thanks.
Joshua.

See this link for a few pictures:
http://67-72chevytrucks.com/vboard/s...d.php?t=364393

**too much stuff** · 10-17-2009, 02:46 PM

Any emblems left? Dash pad? Aircleaner assy?

MudBug · 10-17-2009, 03:12 PM

What kinda rear axle, Dana or Eaton?

**bigdon-70blazer** · 10-17-2009, 03:43 PM

Radio delete plate and delete cowl and spotlights interested

**JQ-72** · 10-17-2009, 04:11 PM

too much - I robbed the Custom Camper 30 emblems off for my C30 project, still have 8-400. I'm at work now, but I'll check the dash pad this weekend. Air cleaner is the same on small block. I've got one of them if you are interested.

Mudbug - The rear end is an Eaton. I've got a GM dually rear out of a 73 if you need that style.

Bigdon - The radio delete has a bracket pop-riveted to it. I have one off another truck if you are interested. Delete cowl?? One spotlight housing has a dent (facing inside), other OK - they work $100 for both lights & radio delete + shipping.

*ksjh1316* · 10-17-2009, 05:37 PM

still interested in the siren and light let me know if these are still avail.

LarryMcK9 · 10-17-2009, 07:44 PM

I am interested in the column $90 shipped to 30041. Let me know if still available and how to pay in a PM

Thanks, Larry

**JQ-72** · 10-18-2009, 08:01 AM

Larry - PM sent for payment info on column.

**bigdon-70blazer** · 10-18-2009, 04:20 PM

The cowl that does not have a hole in it for a radio antenna, hence no radio in the truck.

**JQ-72** · 10-18-2009, 04:40 PM

Ah-ha! I know what you are talking about now. If I can ship it without it going oversized, I'll do it. $40 + shipping _ I'll check on it. The panel is real nice and straight with no rust.
JQ

jkeady · 10-18-2009, 09:22 PM

I'll flip ya' a few bucks if you drop the passenger side cowl vent linkage / knob in an envelope and send it my way.

**JQ-72** · 10-20-2009, 07:52 PM

I'm finally back! I've added some more pictures.

Toomuch - Dash pad looks good for a driver - small cracked place (see pic) $40 + freight

Bigdon - I looked at the spot lights closer today and they are not as good as I remembered. Both have a dent on the inside. $50 + freight for them.

Jkeady - Do you need the whole assembly or just the knob?

**JQ-72** · 10-20-2009, 07:53 PM

more

jkeady · 10-20-2009, 07:55 PM

I need the knob, the rod that connects to the vent, and the little bracket that holds it to the sheet metal. Not the vent door itself. I'm also looking for a black door lock button, too, if you've got one hanging around.

**JQ-72** · 10-20-2009, 08:00 PM

A few morew items: Big Block fan shroud. Top ears were ground down for clearence - solid besides that. $60 + shipping.

Warning light gauge cluster - real nice gauges with good orange needles - 12K miles. Chrome on bezel is a little worn but still looks good. $50 + shipping.

**too much stuff** · 10-20-2009, 09:51 PM

Thanks for the pics, but i am going to pass. Eric

dk1972 · 10-20-2009, 11:39 PM

how much for rims and caps?
and are they split rims?

**70cst** · 10-21-2009, 08:13 AM

Mirrors...what shape and price? Ship 43777 I z interested

**70cst** · 10-21-2009, 05:16 PM

ttt

**JQ-72** · 10-21-2009, 11:04 PM

DK - rims are 16" and not split rims - 1 piece solid. $100 for wheels. Caps are listed for $75 (see above), but I'll let you have wheels and caps for $150 + shipping.

70CST - mirrors are real nice, but driver's side head is painted and pass. is stainless. I think I have another stainless head to swap out - if so, $50 shipped to you. Arms are not bent and look good!

JQ

jkeady · 10-21-2009, 11:15 PM

So can you do anything for me re: my last post? Not big pieces, I realize, but I need 'em.

Quote:

I need the knob, the rod that connects to the vent, and the little bracket that holds it to the sheet metal. Not the vent door itself. I'm also looking for a black door lock button, too, if you've got one hanging around.

**70cst** · 10-21-2009, 11:23 PM

Quote:

70CST - mirrors are real nice, but driver's side head is painted and pass. is stainless. I think I have another stainless head to swap out - if so, $50 shipped to you. Arms are not bent and look good!

Would this be a complete set of SS mirrors?

**JQ-72** · 10-22-2009, 01:17 AM

70CST - If I have another chrome mirror head it will be $50 shipped for the complete set.

Jkeady - Sorry, you slipped in between my posts and I didn't see it. $15 shipped for rod, bracket, and knob.

**70cst** · 10-22-2009, 07:43 AM

Quote:

Originally Posted by JQ-72

70CST - If I have another chrome mirror head it will be $50 shipped for the complete set.

If you have a complete SS set including brackets put me down....thanks.

BOOB · 10-22-2009, 10:02 AM

I need the hump if it will bolt in a '70 C-10. Is it rusty?

10-17-2009, 12:13 PM	#1
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,625	PARTING 70 BB 1 ton, posi Well, I've decided to part the firetruck. This is a 12K mile original firetruck that was used at a large manufacturing plant. It was a Custom 30 - same as Longhorn frame. First off, I'm keeping the motor and trans. The doors and hood are already sold, but everything else is up for grabs! (I'm also keeping the glovebox door to add to my collection). Cab is pretty bad rusted. Grill is pristine, BUT has a huge hole cut in the middle of it for the pump shaft. Rolling frame - 133". Very solid frame. Good brakes, factory TH400 trans. cross member, auxiliary rear spring, front stabilizer, and NoSpin 4.10. This is a Detroit locker rear with only 12K miles!! $700 for all. Painted hub caps - no rust, a few dents that should push out from back side. $75. Auto column - NICE, levers have light rust. $75 RED steering wheel. Really nice wheel - a few small stress cracks, but no gaping holes like most have. $75. High hump trans cover - $50. 68-71 BB frame mounts - $75 70-72 HEAT STOVE! Rare item - includes pipe and housing. $200. I'll add more pictures later. All above prices + shipping. You can figure shipping from Killen, AL 35645 to get a ball park figure. No shipping on large parts. Anything else you see, just ask. Thanks. Joshua. See this link for a few pictures: http://67-72chevytrucks.com/vboard/s...d.php?t=364393 __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

10-17-2009, 02:46 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: PARTING 70 BB 1 ton, posi Any emblems left? Dash pad? Aircleaner assy? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-17-2009, 03:12 PM	#3
MudBug Registered User Join Date: Jan 2007 Location: tennessee Posts: 159	Re: PARTING 70 BB 1 ton, posi What kinda rear axle, Dana or Eaton?

10-17-2009, 03:43 PM	#4
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: PARTING 70 BB 1 ton, posi Radio delete plate and delete cowl and spotlights interested

10-17-2009, 04:11 PM	#5
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,625	Re: PARTING 70 BB 1 ton, posi too much - I robbed the Custom Camper 30 emblems off for my C30 project, still have 8-400. I'm at work now, but I'll check the dash pad this weekend. Air cleaner is the same on small block. I've got one of them if you are interested. Mudbug - The rear end is an Eaton. I've got a GM dually rear out of a 73 if you need that style. Bigdon - The radio delete has a bracket pop-riveted to it. I have one off another truck if you are interested. Delete cowl?? One spotlight housing has a dent (facing inside), other OK - they work $100 for both lights & radio delete + shipping. __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

10-17-2009, 05:37 PM	#6
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: PARTING 70 BB 1 ton, posi still interested in the siren and light let me know if these are still avail.

10-17-2009, 07:44 PM	#7
LarryMcK9 Registered User Join Date: Apr 2009 Location: Cumming, Ga Posts: 37	Re: PARTING 70 BB 1 ton, posi I am interested in the column $90 shipped to 30041. Let me know if still available and how to pay in a PM Thanks, Larry

10-18-2009, 08:01 AM	#8
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,625	Re: PARTING 70 BB 1 ton, posi Larry - PM sent for payment info on column. __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

10-18-2009, 04:20 PM	#9
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: PARTING 70 BB 1 ton, posi The cowl that does not have a hole in it for a radio antenna, hence no radio in the truck.

10-18-2009, 04:40 PM	#10
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,625	Re: PARTING 70 BB 1 ton, posi Ah-ha! I know what you are talking about now. If I can ship it without it going oversized, I'll do it. $40 + shipping _ I'll check on it. The panel is real nice and straight with no rust. JQ __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

10-18-2009, 09:22 PM	#11
jkeady Registered User Join Date: Apr 2004 Location: Salem, OR Posts: 127	Re: PARTING 70 BB 1 ton, posi I'll flip ya' a few bucks if you drop the passenger side cowl vent linkage / knob in an envelope and send it my way. __________________ Josh '70 Custom Camper / 20

10-20-2009, 07:52 PM	#12
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,625	Re: PARTING 70 BB 1 ton, posi I'm finally back! I've added some more pictures. Toomuch - Dash pad looks good for a driver - small cracked place (see pic) $40 + freight Bigdon - I looked at the spot lights closer today and they are not as good as I remembered. Both have a dent on the inside. $50 + freight for them. Jkeady - Do you need the whole assembly or just the knob? Attached Images __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

10-20-2009, 07:53 PM	#13
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,625	Re: PARTING 70 BB 1 ton, posi more Attached Images __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

10-20-2009, 07:55 PM	#14
jkeady Registered User Join Date: Apr 2004 Location: Salem, OR Posts: 127	Re: PARTING 70 BB 1 ton, posi I need the knob, the rod that connects to the vent, and the little bracket that holds it to the sheet metal. Not the vent door itself. I'm also looking for a black door lock button, too, if you've got one hanging around. __________________ Josh '70 Custom Camper / 20 Last edited by jkeady; 10-20-2009 at 07:56 PM.

10-20-2009, 08:00 PM	#15
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,625	Re: PARTING 70 BB 1 ton, posi A few morew items: Big Block fan shroud. Top ears were ground down for clearence - solid besides that. $60 + shipping. Warning light gauge cluster - real nice gauges with good orange needles - 12K miles. Chrome on bezel is a little worn but still looks good. $50 + shipping. Attached Images __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior



Register or Log In To remove these advertisements.

10-20-2009, 09:51 PM	#16
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: PARTING 70 BB 1 ton, posi Thanks for the pics, but i am going to pass. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-20-2009, 11:39 PM	#17
dk1972 Registered User Join Date: Oct 2009 Location: phoenix arizona Posts: 93	Re: PARTING 70 BB 1 ton, posi how much for rims and caps? and are they split rims?

10-21-2009, 08:13 AM	#18
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: PARTING 70 BB 1 ton, posi Mirrors...what shape and price? Ship 43777 I z interested __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! Last edited by 70cst; 10-21-2009 at 08:14 AM.

10-21-2009, 05:16 PM	#19
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: PARTING 70 BB 1 ton, posi ttt __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

10-21-2009, 11:04 PM	#20
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,625	Re: PARTING 70 BB 1 ton, posi DK - rims are 16" and not split rims - 1 piece solid. $100 for wheels. Caps are listed for $75 (see above), but I'll let you have wheels and caps for $150 + shipping. 70CST - mirrors are real nice, but driver's side head is painted and pass. is stainless. I think I have another stainless head to swap out - if so, $50 shipped to you. Arms are not bent and look good! JQ __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

10-22-2009, 01:17 AM	#23
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,625	Re: PARTING 70 BB 1 ton, posi 70CST - If I have another chrome mirror head it will be $50 shipped for the complete set. Jkeady - Sorry, you slipped in between my posts and I didn't see it. $15 shipped for rod, bracket, and knob. __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

10-22-2009, 10:02 AM	#25
BOOB Registered User Join Date: Oct 2008 Location: Taylor, TX Posts: 95	Re: PARTING 70 BB 1 ton, posi I need the hump if it will bolt in a '70 C-10. Is it rusty? __________________ 1970 Short/Fleet C-10 (Project) -Slammed and Tubbed 1955 Cameo -Straight six, Turbo Hydro option 1955 BelAir 2 door post -All original down to the oil bath air cleaner 1964 Corvette -All power A/C 327 4 spd. tanker

Register or Log In To remove these advertisements.