Autometer Guages - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72BLAZERDUDE · 04-16-2003, 01:24 PM

Does anyone have a picture of their dash with a full set of Autometer Ultralite guages installed. They seem to be reasonably priced for a full set.

Mudder · 04-16-2003, 02:07 PM

Just finish installing mine but wont have the pics for a couple of days. One thing I can tell you is that its hard to see the top portion of the bottom gauges. Guy from autometer told me they have rings that you can put on the guages first that angle them upwards. Oh yea, I have the pro comps.

Smooth68 · 04-16-2003, 05:25 PM

Its not a full set and the bezel is old but here you go...

HotRod929 · 04-16-2003, 06:08 PM

ProSt68Trk - What size gauges you got going there? Thanks

HotRod

Smooth68 · 04-16-2003, 06:13 PM

5" tach of course and the others are the 2 1/8" ones - I like them better since the fit the existing hole perfectly and sit flush and don't stick out. Thats just me though...

cruzn72 · 04-16-2003, 06:30 PM

Instead of trying to chop up your old dash, you can order an aluminum panel from No-Limit Engineering. The dash can be ordered with or with out gauges. The dash with 5 Autometer Phantom guages (Monster Speedo and Tach, and 3 smaller guages) and a wiring harness is around $650, I think.

HotRod929 · 04-16-2003, 06:38 PM

cruzn72 - Do they have a website or something to get more info? Thanks

HotRod

Smooth68 · 04-16-2003, 11:25 PM

Quote:

Originally posted by cruzn72
Instead of trying to chop up your old dash, you can order an aluminum panel from No-Limit Engineering. The dash is around $650, I think.

Ouch!

Mudder · 04-17-2003, 02:46 AM

I used a new beezel from GMC Pauls for like $35 and the guages was $451 + taxes from Summit. 5" tach and speedo, an 3 3/8 fuel guage and 4 2 5/8 pro comps. You have to sand /cut or grind the bottom holes out a little.

HotRod929 · 04-17-2003, 02:52 AM

Mudder67 - What kind of fuel gauge did you get in the 3 3/8" size? Got the summit part number by any chance. THanks

HotRod

Mudder · 04-17-2003, 02:56 AM

The fuel level guage is 5514 I believe. Its a liquid filled guage. They also have oil pressure and water temp the same size. I'm gonna check on the rings that angle the guages up too.

04-16-2003, 01:24 PM	#1
72BLAZERDUDE Registered User Join Date: Jan 2002 Location: WATAUGA,TX Posts: 675	Autometer Guages Does anyone have a picture of their dash with a full set of Autometer Ultralite guages installed. They seem to be reasonably priced for a full set. __________________ 72 2wd 307/AT/AC/TILT WHEEL 78 JIMMY HIGH SIERRA

04-16-2003, 05:25 PM	#3
Smooth68 Registered User Join Date: Aug 2001 Location: West Fork, Arkansas - Razorback Country Posts: 1,826	Its not a full set and the bezel is old but here you go... Attached Images __________________ Smooth68's Web Site WTB 64-66 project or frame/cab, SWB or LWB...I have the fever! Whatcha got?? '68 Short Step - Shaved Body, Soon Bagged - *SOLD* Driver-2004 GMC Z-71 Ext-cab

04-16-2003, 06:08 PM	#4
HotRod929 Registered User Join Date: Mar 2002 Location: Bondurant, IA but in Worcester, MA for school Posts: 767	ProSt68Trk - What size gauges you got going there? Thanks HotRod __________________ 1970 Chevy C-20 350 V-8 Turbo 350 w/ shift kit Dana 60 w/ 4.10 gears AND Powr-Loc POSI New Additions: Summit Headers 135amp alternator Proform HEI Edelbrock 1406 600cfm carb Sunpro Tach Powr-Loc POSI Edelbrock Performer RPM Intake MSD 6A Ignition Box AIM: HotRod929 Visit My Site: http://1970chevy.netfirms.com/

04-16-2003, 06:13 PM	#5
Smooth68 Registered User Join Date: Aug 2001 Location: West Fork, Arkansas - Razorback Country Posts: 1,826	5" tach of course and the others are the 2 1/8" ones - I like them better since the fit the existing hole perfectly and sit flush and don't stick out. Thats just me though... __________________ Smooth68's Web Site WTB 64-66 project or frame/cab, SWB or LWB...I have the fever! Whatcha got?? '68 Short Step - Shaved Body, Soon Bagged - *SOLD* Driver-2004 GMC Z-71 Ext-cab

04-16-2003, 06:38 PM	#7
HotRod929 Registered User Join Date: Mar 2002 Location: Bondurant, IA but in Worcester, MA for school Posts: 767	cruzn72 - Do they have a website or something to get more info? Thanks HotRod __________________ 1970 Chevy C-20 350 V-8 Turbo 350 w/ shift kit Dana 60 w/ 4.10 gears AND Powr-Loc POSI New Additions: Summit Headers 135amp alternator Proform HEI Edelbrock 1406 600cfm carb Sunpro Tach Powr-Loc POSI Edelbrock Performer RPM Intake MSD 6A Ignition Box AIM: HotRod929 Visit My Site: http://1970chevy.netfirms.com/

04-16-2003, 02:07 PM	#2
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Just finish installing mine but wont have the pics for a couple of days. One thing I can tell you is that its hard to see the top portion of the bottom gauges. Guy from autometer told me they have rings that you can put on the guages first that angle them upwards. Oh yea, I have the pro comps.

04-16-2003, 06:30 PM	#6
cruzn72 Registered User Join Date: Mar 2003 Posts: 99	Instead of trying to chop up your old dash, you can order an aluminum panel from No-Limit Engineering. The dash can be ordered with or with out gauges. The dash with 5 Autometer Phantom guages (Monster Speedo and Tach, and 3 smaller guages) and a wiring harness is around $650, I think.

04-17-2003, 02:46 AM	#9
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	I used a new beezel from GMC Pauls for like $35 and the guages was $451 + taxes from Summit. 5" tach and speedo, an 3 3/8 fuel guage and 4 2 5/8 pro comps. You have to sand /cut or grind the bottom holes out a little.

04-17-2003, 02:52 AM	#10
HotRod929 Registered User Join Date: Mar 2002 Location: Bondurant, IA but in Worcester, MA for school Posts: 767	Mudder67 - What kind of fuel gauge did you get in the 3 3/8" size? Got the summit part number by any chance. THanks HotRod __________________ 1970 Chevy C-20 350 V-8 Turbo 350 w/ shift kit Dana 60 w/ 4.10 gears AND Powr-Loc POSI New Additions: Summit Headers 135amp alternator Proform HEI Edelbrock 1406 600cfm carb Sunpro Tach Powr-Loc POSI Edelbrock Performer RPM Intake MSD 6A Ignition Box AIM: HotRod929 Visit My Site: http://1970chevy.netfirms.com/

04-17-2003, 02:56 AM	#11
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	The fuel level guage is 5514 I believe. Its a liquid filled guage. They also have oil pressure and water temp the same size. I'm gonna check on the rings that angle the guages up too.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.