Porterbuilt Hood Hinges for 67-72 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PBFAB.COM · 11-05-2009, 06:35 PM

I know a lot of guys have been waiting patiently (and impatiently) for me to get these dialed in! Here they are, along with the special we will be running until the end of the year!

Porterbuilt Street Rods 67-72 Hood Hinge Relocation Kit
End of the Year Special: $200 Shipped inside the Continental United States (all others $199 plus shipping)
Price will INCREASE Jan. 1, 2010

Porterbuilt Stree Rods has developed a clean, simple, effective, and AFFORDABLE hood hinge relocation system for the 67-72 C10, C20, and C30 series trucks. This hinge system is ideal for extremely lowered applications, where the factory hinges were no longer compatible. This hood hinge system utilizes a bolt-in, cowl-mounted hinge and pocket system. The hood mounting portion provides a weld-on mounting pad that is welded to the underhood’s support frame, and then bolt’s to the hinges pivot arm with adjustability for hood alignment. This is a clean and simple system that can be easily installed, and allows adequate hood to cowl panel clearances when opened.

**lolife99** · 11-05-2009, 09:13 PM

PM sent,...

smashingchuck · 11-05-2009, 10:32 PM

I know someone who needs these, I already sent them an email.

I'll be the first to ask if they would work on a 73-87.

jlaird · 11-05-2009, 11:23 PM

what is the regular price on these going to be?

PBFAB.COM · 11-06-2009, 12:15 AM

Quote:

Originally Posted by jlaird

what is the regular price on these going to be?

The current price is an introductory special, to get the new product out there. After the first of the year the price will go up.

GVizzle · 11-06-2009, 04:24 AM

Sick.

**67cheby** · 11-07-2009, 07:03 PM

Hey have i missed it or, Nathan do you have a 67-72 chevy truck ???

nickp51chevy · 11-07-2009, 07:11 PM

Is there some sort of hydraulic strut that will hold the hood up or something else?

PBFAB.COM · 11-07-2009, 09:53 PM

Quote:

Originally Posted by smashingchuck

I'll be the first to ask if they would work on a 73-87.

I will be finding out here pretty quickly. I will also be testing them out on the 60-66 trucks.

Nate

PBFAB.COM · 11-07-2009, 09:54 PM

Quote:

Originally Posted by 67cheby

Hey have i missed it or, Nathan do you have a 67-72 chevy truck ???

69. It will start surfacing again here in the next couple months.

PBFAB.COM · 11-07-2009, 09:54 PM

Quote:

Originally Posted by nickp51chevy

Is there some sort of hydraulic strut that will hold the hood up or something else?

There will be a gas charged strut option coming soon! For now it's just the hinges.

Mike Bradbury · 11-10-2009, 11:45 AM

Nate, Looks sweet! Will they come with the weld on base plate that provides the hood anchor points?

fxdxharley · 11-10-2009, 02:24 PM

Nate whens the new website going to be up and going? Dropmember.com isnt working.

PBFAB.COM · 11-10-2009, 03:05 PM

Quote:

Originally Posted by Mike Bradbury

Nate, Looks sweet! Will they come with the weld on base plate that provides the hood anchor points?

Mike-

The plate that gets welded to the under-hood support brace is included in the kit. The kit also includes stainledd button-head fasteners.

PBFAB.COM · 11-10-2009, 03:05 PM

Quote:

Originally Posted by fxdxharley

Nate whens the new website going to be up and going? Dropmember.com isnt working.

ANY DAY now!!!!!!!!!

SCOTI · 11-10-2009, 05:20 PM

Quote:

Originally Posted by porterbuilt

ANY DAY now!!!!!!!!!

Did they tell you 2-weeks? If so . ......

PBFAB.COM · 11-10-2009, 05:58 PM

Quote:

Originally Posted by SCOTI

Did they tell you 2-weeks? If so . ......

He's smarter than that!

SCOTTMO · 11-10-2009, 06:18 PM

These look real nice nathan

2wd73blazer · 11-11-2009, 10:58 PM

If I want the strut option should I wait to purchase hinges or will the struts work with the hinges you show here?

PBFAB.COM · 11-11-2009, 11:22 PM

Quote:

Originally Posted by 2wd73blazer

If I want the strut option should I wait to purchase hinges or will the struts work with the hinges you show here?

The gas strut option will be used in conjunction with these hinges. Purchase the hinges now, and the gas strut kit when it comes out!

stunna · 11-12-2009, 02:24 PM

Quote:

Originally Posted by porterbuilt

The gas strut option will be used in conjunction with these hinges. Purchase the hinges now, and the gas strut kit when it comes out!

Nate, do you think the strut option will be available before the end of the year?

C20-67_N_MO · 11-12-2009, 06:28 PM

Okay I want these but how does the hood stay open w/o the springs?

Is that what you guys are talking about the gas strut option?

PBFAB.COM · 11-12-2009, 06:39 PM

Quote:

Originally Posted by stunna

Nate, do you think the strut option will be available before the end of the year?

That is my goal.

PBFAB.COM · 11-12-2009, 06:41 PM

Quote:

Originally Posted by C20-67_N_MO

Okay I want these but how does the hood stay open w/o the springs?

Is that what you guys are talking about the gas strut option?

You're correct, the springs on the factory hinges are what hold the hood up. These are hinges only... so a prop rod would be needed.

The gas strut kit will be an option to work with my hinges, and thus hold the hood up without a prop rod.

Nate

*Puropedo* · 11-18-2009, 02:18 AM

Nate, do you have any idea when will I be receiving my hinges? Cant wait to start mocking them up, "puropedo"

11-05-2009, 06:35 PM	#1
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Porterbuilt Hood Hinges for 67-72 I know a lot of guys have been waiting patiently (and impatiently) for me to get these dialed in! Here they are, along with the special we will be running until the end of the year! Porterbuilt Street Rods 67-72 Hood Hinge Relocation Kit End of the Year Special: $200 Shipped inside the Continental United States (all others $199 plus shipping) Price will INCREASE Jan. 1, 2010 Porterbuilt Stree Rods has developed a clean, simple, effective, and AFFORDABLE hood hinge relocation system for the 67-72 C10, C20, and C30 series trucks. This hinge system is ideal for extremely lowered applications, where the factory hinges were no longer compatible. This hood hinge system utilizes a bolt-in, cowl-mounted hinge and pocket system. The hood mounting portion provides a weld-on mounting pad that is welded to the underhood’s support frame, and then bolt’s to the hinges pivot arm with adjustability for hood alignment. This is a clean and simple system that can be easily installed, and allows adequate hood to cowl panel clearances when opened. __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003! Last edited by PBFAB.COM; 12-02-2009 at 02:53 PM.

11-05-2009, 09:13 PM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Porterbuilt Hood Hinges for 67-72 PM sent,... __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-05-2009, 10:32 PM	#3
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: Porterbuilt Hood Hinges for 67-72 I know someone who needs these, I already sent them an email. I'll be the first to ask if they would work on a 73-87. __________________ 78 Build Thread 4Runner Build

11-05-2009, 11:23 PM	#4
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: Porterbuilt Hood Hinges for 67-72 what is the regular price on these going to be?

11-06-2009, 04:24 AM	#6
GVizzle Registered User Join Date: Oct 2008 Location: San Clemente, CA Posts: 405	Re: Porterbuilt Hood Hinges for 67-72 Sick.

11-07-2009, 07:03 PM	#7
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Porterbuilt Hood Hinges for 67-72 Hey have i missed it or, Nathan do you have a 67-72 chevy truck ??? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-07-2009, 07:11 PM	#8
nickp51chevy Registered Chevy Owner Join Date: Aug 2008 Location: Snohomish, wa Posts: 1,557	Re: Porterbuilt Hood Hinges for 67-72 Is there some sort of hydraulic strut that will hold the hood up or something else? __________________ Love is fleeting, but Chevy trucks are forever!!!! 1970 Chevy CST C10 long box 350/400 2008 Chevy Silverado short box 4x4 Had; 1951 Chevy short box 307/T5 1988 Chevy shot box 4x4 350/350 1971 Chevy C10 long box 4x4 350/350 1971 Chevy C20 long box 350/350 1971 Chevy C10 long box 350/350

11-10-2009, 11:45 AM	#12
Mike Bradbury Registered User Join Date: Apr 2008 Location: San Diego California Posts: 1,316	Re: Porterbuilt Hood Hinges for 67-72 Nate, Looks sweet! Will they come with the weld on base plate that provides the hood anchor points? __________________ I'd rather attempt something great and fail.. than try something ordinary and succeed. Norman Vincent Peale Project: Barn Raising http://67-72chevytrucks.com/vboard/s...d.php?t=414961 Project: 30 Be Low https://67-72chevytrucks.com/vboard/...d.php?t=830583

11-10-2009, 02:24 PM	#13
fxdxharley Just a nother gear head Join Date: Jul 2009 Location: Barrington NH Posts: 501	Re: Porterbuilt Hood Hinges for 67-72 Nate whens the new website going to be up and going? Dropmember.com isnt working. __________________ 2013 HD FLHX 2000 chevy 2500 6.0l 4x4 3dr 2000 harley fxdx 71 Jimmy 4x4- future crawler/ woods rig 71 blazer (C4 2wd conv project) http://67-72chevytrucks.com/vboard/s...d.php?t=523589 Last edited by fxdxharley; 11-10-2009 at 02:24 PM.

11-10-2009, 06:18 PM	#18
SCOTTMO powdercoater Join Date: Dec 2008 Location: mesa,az Posts: 203	Re: Porterbuilt Hood Hinges for 67-72 These look real nice nathan __________________ SCOTT

11-11-2009, 10:58 PM	#19
2wd73blazer Registered User Join Date: Jan 2008 Location: North Augusta,SC Posts: 801	Re: Porterbuilt Hood Hinges for 67-72 If I want the strut option should I wait to purchase hinges or will the struts work with the hinges you show here?

11-12-2009, 06:28 PM	#22
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: Porterbuilt Hood Hinges for 67-72 Okay I want these but how does the hood stay open w/o the springs? Is that what you guys are talking about the gas strut option? __________________ Coming Soon: Project 1970 Country Truck

11-18-2009, 02:18 AM	#25
Puropedo Account Suspended Join Date: Nov 2008 Location: Prunedale California Posts: 782	Re: Porterbuilt Hood Hinges for 67-72 Nate, do you have any idea when will I be receiving my hinges? Cant wait to start mocking them up, "puropedo"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.