jimmy build - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

onlyifihadachevy · 11-06-2009, 07:56 PM

The trucks is really tall almost as tall as you jimmy.

Rollinsqrbdy · 11-06-2009, 08:28 PM

Wow they look sweet. Whats next?

70 beast · 11-06-2009, 10:14 PM

yah. lift wise the trucks got me by an inch but tire wise ill have it by a couple.

whats next...shoot let me consult the page long list i have

getting it running. im still having carb issues. i know the gas tank needs to be flushed. so once i get that flushed then i want to change the intake and get a 4 barrell instead of the 2 barrel it has now. worked on it today alittle just cleaning up the new eaton and sourcing where i can get my rear brake hose.

oh and some dude i guess came by and asked if it was for sale...again.

heres a few pics
the engine bay

how she sits now (front fender horns are coming off)

onlyifihadachevy · 11-06-2009, 10:27 PM

What kind of intake? One better for low end or top end?

70 beast · 11-06-2009, 10:45 PM

an edlebrock i believe. it was for a 350 my pops was rebuilding but i snagged it up for the time being.
i believe itll be better low end. that's what im going for. eventually im either going to do a BBC or a stout 292.

Hoods69BadBowTie · 11-10-2009, 11:16 PM

Nice damn looks killer with the lift and tires. I like it! Keep up the good work man

70 beast · 11-11-2009, 11:06 AM

thanks. no school till Friday so im going to try and find a carb, and see what dana44 4.56 gears cost

70 beast · 11-28-2009, 01:57 PM

as the title says,
did some costmetic alterations yesterday.

cut off the fender horns(?)

heres what came off

heres how it looks now

my girl also painted the inside doors silver. weve decided on a paint sceem. blue/silver inside and dark blue outside.
the black/red will begone soon for a blue primer.

Rollinsqrbdy · 11-28-2009, 03:15 PM

Hey that looks real good bud. What brand of wheels are those?

70 beast · 11-28-2009, 03:52 PM

not real sure. they were on my previous pickup when i bought it. never bothered to ask.
i vaguely remember something my dad said they were...American mags or something. im not 100% sure though. i do recall my dad having a set that looked exactly like them but smaller.

JPCY72 · 11-29-2009, 01:38 PM

When are you putting the front spring hangars on? Im really intrested in this spring swap cause Id like to do that.

onlyifihadachevy · 11-29-2009, 09:50 PM

After since you cut the fenders, it looks really wide. But, still looks great.

70 beast · 11-29-2009, 11:36 PM

Quote:

Originally Posted by JPCY72

When are you putting the front spring hangars on? Im really intrested in this spring swap cause Id like to do that.

im not sure yet. i keep going back and forth on whether to use them on this project or wait and use them on an s15 i wanna build. i know for sure though that there are things that need to be done like crossover before the swap cuz of the added travel you gain with 52s

70 beast · 11-29-2009, 11:39 PM

Quote:

Originally Posted by onlyifihadachevy

After since you cut the fenders, it looks really wide. But, still looks great.

yah i was pleased with the way it turned out. i like how it gives more room fo hte tires and the way it looks from the from is just bad a$$

70 beast · 12-19-2009, 07:26 PM

not much of a big update but i took the rear bumper off to paint in the tight spots.

also decided to ditch the red on the bottom for solid flat black

and started painting the interior. it'll be a semi metallic silver.

Wildstreak · 12-23-2009, 01:37 PM

Quote:

Originally Posted by 70 beast

an edlebrock i believe. it was for a 350 my pops was rebuilding but i snagged it up for the time being.
i believe itll be better low end. that's what im going for. eventually im either going to do a BBC or a stout 292.

BBC! cmon you know you wanna

really love this jimmy! you need a mean front bumper now!

silver7 · 12-24-2009, 10:27 AM

Looking good. I love those mean looking GMC front ends on lifted 4x4s.

70 beast · 12-24-2009, 09:31 PM

Quote:

Originally Posted by Wildstreak

BBC! cmon you know you wanna

really love this jimmy! you need a mean front bumper now!

i really wanna run a 427 bbc!

as for the bumper i wanna make a stinger front for it

Wildstreak · 12-24-2009, 09:35 PM

Idk why but I love 427's, I have a 454 that I pulled from my 70ss camaro(not stock 454) and have been deeming about the 427 anniversary crate engine for months lol.

70 beast · 12-24-2009, 09:40 PM

their just bad a$$ in my opinion.

70 beast · 12-29-2009, 12:55 PM

finally found my bag of hardware for the door panels and what not so hopefully this weekend i can put all that back on and get to painting the day and see about changing the intake/carb finally as well

**Yukon Jack** · 12-29-2009, 05:25 PM

Lookin' great! Do you know the brand of the rims?

Burt4x4 · 12-30-2009, 10:39 AM

I love spray paint & BBCs

hehehe
The 454 I have is my first BBC and I'm totaly haveing fun with it

Someday we should wheel! I don't get out nearly as much as I would like too..
Keep the pics a flowin
Oh and I have heard thoes "horns" you cut off called "fangs" more than horns. I would guess horns point up, fangs point down

70 beast · 12-30-2009, 11:42 AM

that makes wayyyyyyy better sense Burt

when i was cutting them off i was trying to figure out what they were and finally settled for horns.

we should definitely go wheeling. this truck should be better than my first one (bbc) on gas

as for the wheels, i haven't remembered to ask my pops what make so ill make a note to ask this weekend. really wish it was done in time for the snow this weekend but there's always next time.

70 beast · 01-02-2010, 12:10 AM

heres a snap shot of the new performer intake
need to get some plugs and it should be ready to button up and test

11-06-2009, 07:56 PM	#26
onlyifihadachevy Registered User Join Date: Mar 2009 Location: seaside,ca Posts: 778	Re: jimmy build The trucks is really tall almost as tall as you jimmy. __________________ 72 gmc 2500 2wd drive convert My 72 thread http://67-72chevytrucks.com/vboard/s...d.php?t=346712 THe other truck, wheeler 69 1/2 4x4, yellow and rusty. http://67-72chevytrucks.com/vboard/s...d.php?t=350300

11-06-2009, 08:28 PM	#27
Rollinsqrbdy Registered User Join Date: Aug 2008 Location: Dexter, N.M. Posts: 1,082	Re: jimmy build Wow they look sweet. Whats next? __________________ Its Kool to be a square 2013 Chevy Silverado Z71 w/ 7" lift and 35" Nitto's 1985 C-10 ......My dream truck (under construction) 1984 k 10 Silverado...6" lift with 38.5 super swampers New Mexico Member --- Member of the Square Body Club---

11-06-2009, 10:14 PM	#28
70 beast Certified Hobbiest Join Date: Jul 2007 Location: Sacramento, Ca Posts: 384	Re: jimmy build yah. lift wise the trucks got me by an inch but tire wise ill have it by a couple. whats next...shoot let me consult the page long list i have getting it running. im still having carb issues. i know the gas tank needs to be flushed. so once i get that flushed then i want to change the intake and get a 4 barrell instead of the 2 barrel it has now. worked on it today alittle just cleaning up the new eaton and sourcing where i can get my rear brake hose. oh and some dude i guess came by and asked if it was for sale...again. heres a few pics the engine bay how she sits now (front fender horns are coming off) __________________ my jimmy build http://67-72chevytrucks.com/vboard/s...d.php?t=352536 Last edited by 70 beast; 06-11-2011 at 02:26 PM.

11-06-2009, 10:27 PM	#29
onlyifihadachevy Registered User Join Date: Mar 2009 Location: seaside,ca Posts: 778	Re: jimmy build What kind of intake? One better for low end or top end? __________________ 72 gmc 2500 2wd drive convert My 72 thread http://67-72chevytrucks.com/vboard/s...d.php?t=346712 THe other truck, wheeler 69 1/2 4x4, yellow and rusty. http://67-72chevytrucks.com/vboard/s...d.php?t=350300

11-06-2009, 10:45 PM	#30
70 beast Certified Hobbiest Join Date: Jul 2007 Location: Sacramento, Ca Posts: 384	Re: jimmy build an edlebrock i believe. it was for a 350 my pops was rebuilding but i snagged it up for the time being. i believe itll be better low end. that's what im going for. eventually im either going to do a BBC or a stout 292. __________________ my jimmy build http://67-72chevytrucks.com/vboard/s...d.php?t=352536

11-10-2009, 11:16 PM	#31
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: jimmy build Nice damn looks killer with the lift and tires. I like it! Keep up the good work man __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

11-11-2009, 11:06 AM	#32
70 beast Certified Hobbiest Join Date: Jul 2007 Location: Sacramento, Ca Posts: 384	Re: jimmy build thanks. no school till Friday so im going to try and find a carb, and see what dana44 4.56 gears cost __________________ my jimmy build http://67-72chevytrucks.com/vboard/s...d.php?t=352536

11-28-2009, 01:57 PM	#33
70 beast Certified Hobbiest Join Date: Jul 2007 Location: Sacramento, Ca Posts: 384	little update as the title says, did some costmetic alterations yesterday. cut off the fender horns(?) heres what came off heres how it looks now my girl also painted the inside doors silver. weve decided on a paint sceem. blue/silver inside and dark blue outside. the black/red will begone soon for a blue primer. __________________ my jimmy build http://67-72chevytrucks.com/vboard/s...d.php?t=352536 Last edited by 70 beast; 06-11-2011 at 02:29 PM.

11-28-2009, 03:15 PM	#34
Rollinsqrbdy Registered User Join Date: Aug 2008 Location: Dexter, N.M. Posts: 1,082	Re: jimmy build Hey that looks real good bud. What brand of wheels are those? __________________ Its Kool to be a square 2013 Chevy Silverado Z71 w/ 7" lift and 35" Nitto's 1985 C-10 ......My dream truck (under construction) 1984 k 10 Silverado...6" lift with 38.5 super swampers New Mexico Member --- Member of the Square Body Club---

11-28-2009, 03:52 PM	#35
70 beast Certified Hobbiest Join Date: Jul 2007 Location: Sacramento, Ca Posts: 384	Re: jimmy build not real sure. they were on my previous pickup when i bought it. never bothered to ask. i vaguely remember something my dad said they were...American mags or something. im not 100% sure though. i do recall my dad having a set that looked exactly like them but smaller. __________________ my jimmy build http://67-72chevytrucks.com/vboard/s...d.php?t=352536

11-29-2009, 01:38 PM	#36
JPCY72 Registered User Join Date: May 2009 Location: Morongo Valley Posts: 130	Re: jimmy build When are you putting the front spring hangars on? Im really intrested in this spring swap cause Id like to do that.

11-29-2009, 09:50 PM	#37
onlyifihadachevy Registered User Join Date: Mar 2009 Location: seaside,ca Posts: 778	Re: jimmy build After since you cut the fenders, it looks really wide. But, still looks great. __________________ 72 gmc 2500 2wd drive convert My 72 thread http://67-72chevytrucks.com/vboard/s...d.php?t=346712 THe other truck, wheeler 69 1/2 4x4, yellow and rusty. http://67-72chevytrucks.com/vboard/s...d.php?t=350300

12-19-2009, 07:26 PM	#40
70 beast Certified Hobbiest Join Date: Jul 2007 Location: Sacramento, Ca Posts: 384	Re: jimmy build not much of a big update but i took the rear bumper off to paint in the tight spots. also decided to ditch the red on the bottom for solid flat black and started painting the interior. it'll be a semi metallic silver. __________________ my jimmy build http://67-72chevytrucks.com/vboard/s...d.php?t=352536 Last edited by 70 beast; 06-11-2011 at 02:31 PM.

12-24-2009, 10:27 AM	#42
silver7 Registered User Join Date: Jul 2009 Location: High Point, NC Posts: 613	Re: jimmy build Looking good. I love those mean looking GMC front ends on lifted 4x4s.

12-24-2009, 09:35 PM	#44
Wildstreak "something witty here" Join Date: Apr 2009 Location: Salmo, B.C, Canada Posts: 966	Re: jimmy build Idk why but I love 427's, I have a 454 that I pulled from my 70ss camaro(not stock 454) and have been deeming about the 427 anniversary crate engine for months lol. __________________ 57 chevy 4x4 70 swb fleetside 4x4 68 burb 2wd: 71 burb 2wd: 350 4spd 71 lwb fleetside 4x4: 350/sm465/205/3.07 eaton posi rear 72 lwb fleetside Cheyenne 454/th400 1991 GMC V3500 CC 4x4



Register or Log In To remove these advertisements.

12-24-2009, 09:40 PM	#45
70 beast Certified Hobbiest Join Date: Jul 2007 Location: Sacramento, Ca Posts: 384	Re: jimmy build their just bad a$$ in my opinion. __________________ my jimmy build http://67-72chevytrucks.com/vboard/s...d.php?t=352536

12-29-2009, 12:55 PM	#46
70 beast Certified Hobbiest Join Date: Jul 2007 Location: Sacramento, Ca Posts: 384	Re: jimmy build finally found my bag of hardware for the door panels and what not so hopefully this weekend i can put all that back on and get to painting the day and see about changing the intake/carb finally as well __________________ my jimmy build http://67-72chevytrucks.com/vboard/s...d.php?t=352536

12-29-2009, 05:25 PM	#47
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,689	Re: jimmy build Lookin' great! Do you know the brand of the rims? __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

12-30-2009, 10:39 AM	#48
Burt4x4 Registered User Join Date: Feb 2000 Location: Modesto, CA Posts: 1,842	Re: jimmy build I love spray paint & BBCs hehehe The 454 I have is my first BBC and I'm totaly haveing fun with it Someday we should wheel! I don't get out nearly as much as I would like too.. Keep the pics a flowin Oh and I have heard thoes "horns" you cut off called "fangs" more than horns. I would guess horns point up, fangs point down __________________ 1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks

12-30-2009, 11:42 AM	#49
70 beast Certified Hobbiest Join Date: Jul 2007 Location: Sacramento, Ca Posts: 384	Re: jimmy build that makes wayyyyyyy better sense Burt when i was cutting them off i was trying to figure out what they were and finally settled for horns. we should definitely go wheeling. this truck should be better than my first one (bbc) on gas as for the wheels, i haven't remembered to ask my pops what make so ill make a note to ask this weekend. really wish it was done in time for the snow this weekend but there's always next time. __________________ my jimmy build http://67-72chevytrucks.com/vboard/s...d.php?t=352536

01-02-2010, 12:10 AM	#50
70 beast Certified Hobbiest Join Date: Jul 2007 Location: Sacramento, Ca Posts: 384	Re: jimmy build heres a snap shot of the new performer intake need to get some plugs and it should be ready to button up and test __________________ my jimmy build http://67-72chevytrucks.com/vboard/s...d.php?t=352536

Register or Log In To remove these advertisements.