64 C30 power brake booster - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bobs409 · 11-13-2009, 05:56 PM

Is a power brake booster from a 64 C30 pickup specific to just the C30 or is it also correct for a C10 & C20?

Thanks,

Bob

**Captainfab** · 11-14-2009, 12:25 AM

As far as I know they are the same. The one that was originally on my '66 C30 was the same as a C10 or C20 booster.

bobs409 · 11-15-2009, 09:04 AM

Thanks. The reason I asked is I believe there was a difference on the later years like 1971, etc.

Bob

mbgmike · 11-15-2009, 01:11 PM

Actually Yes and No.
They put three differant setups on the c10/20
The c30's had two setups
one was a Midland Hydrovac and the other type on the c30's were like the C10/20's depends on if it was a 230,348,309 but they did show up on the 230 cid to

The MH was only used on c30's

On the c10's and c20's they also used ones with a horzontal bracket and vertical bracket like the later trucks. Just depends.

Here is a Midland Hydro vac pic.
We have photos of all setups. Just email us if any questions.

I added the other two setups they used. One does not show the horizontal bracket however.

11-13-2009, 05:56 PM	#1
bobs409 1969 Custom 30 wrecker Join Date: Sep 2001 Location: Pottsville, Pa Posts: 2,611	64 C30 power brake booster Is a power brake booster from a 64 C30 pickup specific to just the C30 or is it also correct for a C10 & C20? Thanks, Bob __________________ Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10

11-14-2009, 12:25 AM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: 64 C30 power brake booster As far as I know they are the same. The one that was originally on my '66 C30 was the same as a C10 or C20 booster. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 11-14-2009 at 12:26 AM.

11-15-2009, 09:04 AM	#3
bobs409 1969 Custom 30 wrecker Join Date: Sep 2001 Location: Pottsville, Pa Posts: 2,611	Re: 64 C30 power brake booster Thanks. The reason I asked is I believe there was a difference on the later years like 1971, etc. Bob __________________ Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10

11-15-2009, 01:11 PM	#4
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: 64 C30 power brake booster Actually Yes and No. They put three differant setups on the c10/20 The c30's had two setups one was a Midland Hydrovac and the other type on the c30's were like the C10/20's depends on if it was a 230,348,309 but they did show up on the 230 cid to The MH was only used on c30's On the c10's and c20's they also used ones with a horzontal bracket and vertical bracket like the later trucks. Just depends. Here is a Midland Hydro vac pic. We have photos of all setups. Just email us if any questions. I added the other two setups they used. One does not show the horizontal bracket however. Attached Images Last edited by mbgmike; 11-15-2009 at 07:38 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.