? about bag's and a-arm's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Slammed '87 · 04-18-2003, 06:26 PM

I need new a-arm's for my '87 before i bag it. Are a-arm's interchangeable through '73 - '87, and where would be the best place to buy a new pair, keep in mind i am in Canada! I was planning on having my bag system professionally installed, but is it fairly easy to do yourself?, i do have have access to a shop etc. etc. Do front bag's just bolt in, or do you need to modify anything first? When you buy bag's do they come with all the nessesary hardware, or do u gotta buy it separately? Any and all info would be cool as i have never done this before! Thanks, Dean

BaggedC10 · 04-20-2003, 07:34 AM

Yes, the control arms are the same from 73-87' on 1/2-ton trucks. I would go to a junk yard and buy a pair. Paint them and install new bushings---Your set.

If you want a bolt-on kit for the front, go with ART's Cool-Ride kit. It includes EVERYTHING you will need and is very simple to install. Plus, ART is the Mercedes Benz of air suspension.

www.RideTech.com

phantom dually · 04-20-2003, 01:54 PM

I happen to have a set of lower and upper arms that have been blasted and powder coated black. They do no have bushing in yet but I can include all new parts Ball joints Etc Etc if the price is right. I also have a new set of powdered frontbrackets that I will not be using.

04-18-2003, 06:26 PM	#1
Slammed '87 Registered User Join Date: Feb 2003 Location: Calgary Canada Posts: 556	? about bag's and a-arm's I need new a-arm's for my '87 before i bag it. Are a-arm's interchangeable through '73 - '87, and where would be the best place to buy a new pair, keep in mind i am in Canada! I was planning on having my bag system professionally installed, but is it fairly easy to do yourself?, i do have have access to a shop etc. etc. Do front bag's just bolt in, or do you need to modify anything first? When you buy bag's do they come with all the nessesary hardware, or do u gotta buy it separately? Any and all info would be cool as i have never done this before! Thanks, Dean

04-20-2003, 07:34 AM	#2
BaggedC10 Under construction! Join Date: Aug 2002 Location: NorCal Posts: 1,065	Yes, the control arms are the same from 73-87' on 1/2-ton trucks. I would go to a junk yard and buy a pair. Paint them and install new bushings---Your set. If you want a bolt-on kit for the front, go with ART's Cool-Ride kit. It includes EVERYTHING you will need and is very simple to install. Plus, ART is the Mercedes Benz of air suspension. www.RideTech.com __________________ 2001 Silverado bagged on 22's. Sold

04-20-2003, 01:54 PM	#3
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	I happen to have a set of lower and upper arms that have been blasted and powder coated black. They do no have bushing in yet but I can include all new parts Ball joints Etc Etc if the price is right. I also have a new set of powdered frontbrackets that I will not be using. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.