700R4 driveshaft clearance - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Thealien · 11-19-2009, 06:50 PM

Anybody running a 700R4 or 4L60 with an NP205? Any front driveshaft clearance issues. I was just looking under my Jimmy and the driveshaft is pretty close with the TH350.

Thanks

AJs72K5 · 11-19-2009, 07:12 PM

Close to what? The CV on mine is pretty tight to the bottom of the crossmember, but does clear it. I am running a 241 though. I'd imagine it would be similar clearance on the 205.

Thealien · 11-19-2009, 07:15 PM

close to the transmission pan. I am at stock height. so you may have a lot more space. I can get a finger between the driveshaft and pan on the 350. I believe the pan on the 700 is wier.

elcoshawn · 11-21-2009, 02:52 PM

i have a 700r4 / 205 combo in my 70 3/4 4x4 d60/14b 35inbfgs 6in lift no clearance problems

elcoshawn · 11-21-2009, 02:57 PM

700r4 is a great conversion

Thealien · 11-21-2009, 03:09 PM

I think the 6 inch lift aleviates all the clearance issues. I am at stock height and would like to keep it that way.

11-19-2009, 06:50 PM	#1
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,125	700R4 driveshaft clearance Anybody running a 700R4 or 4L60 with an NP205? Any front driveshaft clearance issues. I was just looking under my Jimmy and the driveshaft is pretty close with the TH350. Thanks

11-19-2009, 07:12 PM	#2
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: 700R4 driveshaft clearance Close to what? The CV on mine is pretty tight to the bottom of the crossmember, but does clear it. I am running a 241 though. I'd imagine it would be similar clearance on the 205. __________________ - AJ Gray Matter Build - 1972 K5 with some stuff Last edited by AJs72K5; 11-19-2009 at 07:13 PM.

11-19-2009, 07:15 PM	#3
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,125	Re: 700R4 driveshaft clearance close to the transmission pan. I am at stock height. so you may have a lot more space. I can get a finger between the driveshaft and pan on the 350. I believe the pan on the 700 is wier.

11-21-2009, 02:52 PM	#4
elcoshawn Registered User Join Date: Oct 2009 Location: crestline CA Posts: 3	Re: 700R4 driveshaft clearance i have a 700r4 / 205 combo in my 70 3/4 4x4 d60/14b 35inbfgs 6in lift no clearance problems

11-21-2009, 02:57 PM	#5
elcoshawn Registered User Join Date: Oct 2009 Location: crestline CA Posts: 3	Re: 700R4 driveshaft clearance 700r4 is a great conversion

11-21-2009, 03:09 PM	#6
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,125	Re: 700R4 driveshaft clearance I think the 6 inch lift aleviates all the clearance issues. I am at stock height and would like to keep it that way.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.