A few simple questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Colesnsty68 · 12-12-2009, 06:06 PM

First off, do i need new motor mounts for a small block to big block swap? Secondly, what all is entittled with a automatic to standard tranny swap. third-ly how do you figured out what spline the axles are and what does that mean really. Also a ford nine in ch swap. and finally a 1/t ton 5 bolt pattern is 5x5 right? and does weld make prostars in that pattern? Thanks lol

b454rat · 12-12-2009, 07:04 PM

See if I can answer all these.

SBS-BBC, mounts are the same, been there done that 4-5 times now.

Auto-stick, ALL the peices meaning=stick column, pedals with linkage or hydro stuff, bellhousing if it's not on the tranny, if your truck is 4wd, front shaft should work, rear might need to be lengthened, crossmember, cut a hole for the shifter or if it's a 70s truck unbolt it and bolt in a stick hump.

What year is your truck?? What axle?? If the one in your sig, 12 bolt, think they are 30 spline but don't hold me to that. GM truck is 5x5.5", go to Summitracing.com, and search for your bolt pattern.

Colesnsty68 · 12-12-2009, 07:17 PM

hoh ok. its a 77. sorry when i did the name i didnt even thimk about it and i named it after the camaro. can i use the same column just remove the shifter? and its a twelve bolt. is a twelve bolt just as strong? and have you ever done a posi swap?

ghettoluxury · 12-12-2009, 07:25 PM

Quote:

Originally Posted by b454rat

GM truck is 5x5.5".

Sorry but GM used 5x5, Ford was 5x5.5!

Colesnsty68 · 12-12-2009, 07:26 PM

alright are we sure on the 5x5?

ghettoluxury · 12-12-2009, 07:28 PM

yes and you can still use your column

b454rat · 12-12-2009, 08:13 PM

Sorry, haven't had anything 5 lug in years...haha.

You can use your auto column, just will have the base of the shifter to look at.

Colesnsty68 · 12-13-2009, 12:32 PM

it's alright, i wish it was a 3/4 ton. so its a 30 spline? and thanks for the help

12-12-2009, 06:06 PM	#1
Colesnsty68 Registered User Join Date: Jun 2009 Location: Arvada, Colorado Posts: 210	A few simple questions First off, do i need new motor mounts for a small block to big block swap? Secondly, what all is entittled with a automatic to standard tranny swap. third-ly how do you figured out what spline the axles are and what does that mean really. Also a ford nine in ch swap. and finally a 1/t ton 5 bolt pattern is 5x5 right? and does weld make prostars in that pattern? Thanks lol __________________ 1970 Chevrolet custom camper 20 2000 F@$d F250 Powerjoke "And i still like bologna on white bread now and then" -Alan Jackson

12-12-2009, 07:04 PM	#2
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,465	Re: A few simple questions See if I can answer all these. SBS-BBC, mounts are the same, been there done that 4-5 times now. Auto-stick, ALL the peices meaning=stick column, pedals with linkage or hydro stuff, bellhousing if it's not on the tranny, if your truck is 4wd, front shaft should work, rear might need to be lengthened, crossmember, cut a hole for the shifter or if it's a 70s truck unbolt it and bolt in a stick hump. What year is your truck?? What axle?? If the one in your sig, 12 bolt, think they are 30 spline but don't hold me to that. GM truck is 5x5.5", go to Summitracing.com, and search for your bolt pattern. __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS

12-12-2009, 07:17 PM	#3
Colesnsty68 Registered User Join Date: Jun 2009 Location: Arvada, Colorado Posts: 210	Re: A few simple questions hoh ok. its a 77. sorry when i did the name i didnt even thimk about it and i named it after the camaro. can i use the same column just remove the shifter? and its a twelve bolt. is a twelve bolt just as strong? and have you ever done a posi swap? __________________ 1970 Chevrolet custom camper 20 2000 F@$d F250 Powerjoke "And i still like bologna on white bread now and then" -Alan Jackson Last edited by Colesnsty68; 12-12-2009 at 07:19 PM.

12-12-2009, 07:26 PM	#5
Colesnsty68 Registered User Join Date: Jun 2009 Location: Arvada, Colorado Posts: 210	Re: A few simple questions alright are we sure on the 5x5? __________________ 1970 Chevrolet custom camper 20 2000 F@$d F250 Powerjoke "And i still like bologna on white bread now and then" -Alan Jackson

12-12-2009, 07:28 PM	#6
ghettoluxury Registered User Join Date: Apr 2009 Location: Waynesfield Ohio Posts: 1,991	Re: A few simple questions yes and you can still use your column __________________ 1949 Five Window, 1973 Step Side, 2000 Z71

12-12-2009, 08:13 PM	#7
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,465	Re: A few simple questions Sorry, haven't had anything 5 lug in years...haha. You can use your auto column, just will have the base of the shifter to look at. __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS

12-13-2009, 12:32 PM	#8
Colesnsty68 Registered User Join Date: Jun 2009 Location: Arvada, Colorado Posts: 210	Re: A few simple questions it's alright, i wish it was a 3/4 ton. so its a 30 spline? and thanks for the help __________________ 1970 Chevrolet custom camper 20 2000 F@$d F250 Powerjoke "And i still like bologna on white bread now and then" -Alan Jackson



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.