IN Door screws needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pumpgas · 12-19-2009, 10:13 AM

I am in need of the screws and chrome cups for the 71-2 doors that attach the inner and outer skins where the vent window goes in, can you buy those new or only find used? Any help would be greatly appreciated.

**too much stuff** · 12-19-2009, 10:18 AM

I haven't seen them new, but that doeesn't mean they aren't out there. These would be 72 specific. Someone should have a pair for you.

pumpgas · 12-19-2009, 10:21 AM

Quote:

Originally Posted by too much stuff

I haven't seen them new, but that doeesn't mean they aren't out there. These would be 72 specific. Someone should have a pair for you.

Thank you for the input I thought they were 72 only but didn't want to be out of line either way.lol I actually have 1 but figured if I'm buying new might as well get 2 and most people that would sell them most likely wouldn't sell just one.

teeitup · 12-19-2009, 10:28 AM

I think I have some out there, I'll look later this afternoon. Thanks Randy

Thealien · 12-19-2009, 10:30 AM

Randy. If you have 2 sets I would like one set also

Thanks
Mark

**KSCHEVYUP** · 12-19-2009, 11:06 AM

I got a used set of the 72 vent screws and cups from teeitup not to long ago.
I did find a supplier for the screws; but never did find the cups; which you have got to have to keep the screw from pulling through.
Check out Atheys Classic Trucks @ s-c-t-p.com in the clips/fasteners section. It lists (screws that go in door below vent window) @ .25cents each.
I have not tried these as I got some from Randy used, but maybe someone else has and can give some input.
Ron

Duncan and son · 12-19-2009, 01:09 PM

pumpgas, if Randy does not have them let me know and we will send you one.
Merry Christmas Paul and Jason

4tiresngas · 12-19-2009, 03:12 PM

Okay. Please put me in line for a set. I just have a whole in each door right now. If someone has another set, just let me know where to send the $$$$.
Thanks,

pumpgas · 12-20-2009, 12:24 PM

All sounds great I'll wait to see if Randy has any and if not then work my way down the list of people who have them. I'm glad I started this thread as it seems like a lot of people are running around missing these.lol

teeitup · 12-20-2009, 01:03 PM

Here is what I have some have some rust, driver quality. Thanks Randy

pumpgas · 12-20-2009, 10:58 PM

Randy what would it take to get one of the one's on the far left in the 1st and 3rd pics?

teeitup · 12-21-2009, 09:11 AM

HI, just send me your addy and I'll get them out to you. Merry Christmas, Thanks Randy

pumpgas · 12-21-2009, 08:35 PM

Quote:

Originally Posted by teeitup

HI, just send me your addy and I'll get them out to you. Merry Christmas, Thanks Randy

No thank you Randy I greatly appreciate this. PM'd addy

Papabone · 12-22-2009, 11:31 AM

To bad these arent available in stainless steel set.

pumpgas · 12-30-2009, 01:37 PM

Randy thank you very much I got the screws last night in the mail now I can put the doors back together.

12-19-2009, 10:13 AM	#1
pumpgas Registered User Join Date: Dec 2008 Location: indiana Posts: 304	Door screws needed I am in need of the screws and chrome cups for the 71-2 doors that attach the inner and outer skins where the vent window goes in, can you buy those new or only find used? Any help would be greatly appreciated. __________________ 00' Z28 ("wifes" car) 92' Mustang w/sbc everything needs a little heart beat 87' GMC Sierra Classic Short Bed Fleet side almost stock 69' Chevy short step carbed 6.0 w/400th trans. Completed w/325 miles on it

12-19-2009, 10:18 AM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,769	Re: Door screws needed I haven't seen them new, but that doeesn't mean they aren't out there. These would be 72 specific. Someone should have a pair for you. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-19-2009, 10:28 AM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Door screws needed I think I have some out there, I'll look later this afternoon. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-19-2009, 10:30 AM	#5
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,125	Re: Door screws needed Randy. If you have 2 sets I would like one set also Thanks Mark

12-19-2009, 11:06 AM	#6
KSCHEVYUP Senior Member Join Date: Nov 2003 Location: NEAR MARYSVILLE,KANSAS 66508 Posts: 470	Re: Door screws needed I got a used set of the 72 vent screws and cups from teeitup not to long ago. I did find a supplier for the screws; but never did find the cups; which you have got to have to keep the screw from pulling through. Check out Atheys Classic Trucks @ s-c-t-p.com in the clips/fasteners section. It lists (screws that go in door below vent window) @ .25cents each. I have not tried these as I got some from Randy used, but maybe someone else has and can give some input. Ron __________________ 1972 C30 Cheyenne Super 1971 C10 (Parts truck)

12-19-2009, 01:09 PM	#7
Duncan and son Registered User Join Date: Sep 2009 Location: Lubbock Texas Posts: 1,049	Re: Door screws needed pumpgas, if Randy does not have them let me know and we will send you one. Merry Christmas Paul and Jason __________________ You can shear a sheep every year, but you can only skin it once The person dealing with facts is never at the mercy of the person dealing with theory 1972 Cheyenne Super 402 400 A/c bucket seat tilt custom camper Longhorn 1975 Silverado 454 Crew cab camper special dually

12-19-2009, 03:12 PM	#8
4tiresngas An American Soldier Join Date: Feb 2005 Location: Grumolo D' Abadessee, Italy Posts: 503	Re: Door screws needed Okay. Please put me in line for a set. I just have a whole in each door right now. If someone has another set, just let me know where to send the $$$$. Thanks, __________________ Dan dan.brue@us.army.mil

12-20-2009, 12:24 PM	#9
pumpgas Registered User Join Date: Dec 2008 Location: indiana Posts: 304	Re: Door screws needed All sounds great I'll wait to see if Randy has any and if not then work my way down the list of people who have them. I'm glad I started this thread as it seems like a lot of people are running around missing these.lol __________________ 00' Z28 ("wifes" car) 92' Mustang w/sbc everything needs a little heart beat 87' GMC Sierra Classic Short Bed Fleet side almost stock 69' Chevy short step carbed 6.0 w/400th trans. Completed w/325 miles on it

12-20-2009, 01:03 PM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Door screws needed Here is what I have some have some rust, driver quality. Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-20-2009, 10:58 PM	#11
pumpgas Registered User Join Date: Dec 2008 Location: indiana Posts: 304	Re: Door screws needed Randy what would it take to get one of the one's on the far left in the 1st and 3rd pics? __________________ 00' Z28 ("wifes" car) 92' Mustang w/sbc everything needs a little heart beat 87' GMC Sierra Classic Short Bed Fleet side almost stock 69' Chevy short step carbed 6.0 w/400th trans. Completed w/325 miles on it

12-21-2009, 09:11 AM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Door screws needed HI, just send me your addy and I'll get them out to you. Merry Christmas, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-22-2009, 11:31 AM	#14
Papabone Registered User Join Date: Dec 2009 Location: Hickory Creek, TX Posts: 4	Re: Door screws needed To bad these arent available in stainless steel set.

12-30-2009, 01:37 PM	#15
pumpgas Registered User Join Date: Dec 2008 Location: indiana Posts: 304	Re: Door screws needed Randy thank you very much I got the screws last night in the mail now I can put the doors back together. __________________ 00' Z28 ("wifes" car) 92' Mustang w/sbc everything needs a little heart beat 87' GMC Sierra Classic Short Bed Fleet side almost stock 69' Chevy short step carbed 6.0 w/400th trans. Completed w/325 miles on it



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.