Identify a few wires, with pictures. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lyrikz · 12-29-2009, 10:57 AM

Hopefully this is pretty simple.
The three wires on the right. Light brown, brown/white, thin green. The second pic is of the plugs that go with those wires. Anyone know where they go. I know one is for the little switch on the master cylinder. What about the others?

Final wire is a very thick green wire. Not the light green one on top, the dark green near the bottom. Its the wire on the left and that is the plug. I was guessing that was the horn..?..?

**Thealien** · 12-29-2009, 11:06 AM

I "think" The tan might be the brake switch connection for the proportioning valve and the small green is the temp sender.

I think the heavy green is the horn. Send me your email and I can send you a nice color diagram

stueber68 · 12-29-2009, 11:14 AM

tan/white= prop valve
green 14 ga. wire is temp sender in dr. cyl head.
green 12 ga. wire is for the horn.
I think that the one for black/ white should be for an ammeter.

lyrikz · 12-29-2009, 11:48 AM

Quote:

Originally Posted by Thealien

I "think" The tan might be the brake switch connection for the proportioning valve and the small green is the temp sender.

I think the heavy green is the horn. Send me your email and I can send you a nice color diagram

Awesome.
runnin46@hotmail.com

Thanks.

lyrikz · 12-29-2009, 11:50 AM

Quote:

Originally Posted by stueber68

tan/white= prop valve
green 14 ga. wire is temp sender in dr. cyl head.
green 12 ga. wire is for the horn.
I think that the one for black/ white should be for an ammeter.

Its brown/white. Its not the ammeter because i have accounted for those two already. Thats the only one i cant seem to figure where it goes...

**jaros44sr** · 12-29-2009, 12:37 PM

You have the connector 180° out of how it fits into the firewall connector, but here are some pics. of how mine goes. Seems like it is part of the TCS system

In that location, mine starts out as brown, then breaks out of the main engine harness and becomes brown/white up on top of the cowl

Large green seems to be horns, but didn't look real close at that

**Thealien** · 12-29-2009, 12:38 PM

That wire wasn't in the diagram but my Jimmy also has that wire. Mine was not hooked to anything?

Diagrams sent

lyrikz · 12-29-2009, 01:21 PM

Quote:

Originally Posted by Thealien

That wire wasn't in the diagram but my Jimmy also has that wire. Mine was not hooked to anything?

Diagrams sent

Awesome. Those wiring diagrams are 22 times better then any i have found anywhere. Thank you SO much man.

I think i am good now.. Im going to run the rest of my wiring, change all my fuses out and then put some power to it..... :| nervous. ahaha

**Thealien** · 12-29-2009, 02:28 PM

Glad I could help. I can't remember who originally supplied those diagrams but I save everything. I am doing my best to share and help others as they have helped me!!

Hope it all works out for you.

MickMc · 12-29-2009, 03:50 PM

Can I request a wiring diagram too?

Mick

72 4x4 chevy · 12-29-2009, 04:48 PM

I like to request the wiring diagram also. I have a few wires I`m not sure where they go. rsheene35@hotmail.com

**Thealien** · 12-29-2009, 06:36 PM

Quote:

Originally Posted by MickMc

Can I request a wiring diagram too?

Mick

To where?

squirel · 12-29-2009, 08:06 PM

Can you please send me a copy of the wiring diagram it would be greatly appreciated thanks squirel@shaw.ca

sneakysnake · 12-29-2009, 08:48 PM

Here is the black and white version.Hope they come out so you can read them.

**Thealien** · 12-30-2009, 09:43 AM

I do have much higher resolution diagrams if anyone has a way of hosting them so everyone can get a copy?

MickMc · 01-03-2010, 02:25 PM

Quote:

Originally Posted by Thealien

To where?

Sorry I was thinking you could read my mind...

MMcMahan04@comcast.net

Thanks for your help

Mick

12-29-2009, 10:57 AM	#1
lyrikz PITbut Join Date: Sep 2007 Location: monroe washington Posts: 3,052	Identify a few wires, with pictures. Hopefully this is pretty simple. The three wires on the right. Light brown, brown/white, thin green. The second pic is of the plugs that go with those wires. Anyone know where they go. I know one is for the little switch on the master cylinder. What about the others? Final wire is a very thick green wire. Not the light green one on top, the dark green near the bottom. Its the wire on the left and that is the plug. I was guessing that was the horn..?..? __________________ New project. 1971 Twin Turbo blazer http://67-72chevytrucks.com/vboard/s...d.php?t=676047 My new YOUTUBE channel.. Videos of my truck and a current walk around. Lyrikz74 Youtube channel *DONE! SOLD!* My 1971 stepside build thread My Build Thread UPDATED 6/11. DONE and sold.

12-29-2009, 11:06 AM	#2
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,134	Re: Identify a few wires, with pictures. I "think" The tan might be the brake switch connection for the proportioning valve and the small green is the temp sender. I think the heavy green is the horn. Send me your email and I can send you a nice color diagram __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

12-29-2009, 11:14 AM	#3
stueber68 1968 C20 Vortec Beast Join Date: Jun 2005 Location: STILLWATER,OKLAHOMA Posts: 483	Re: Identify a few wires, with pictures. tan/white= prop valve green 14 ga. wire is temp sender in dr. cyl head. green 12 ga. wire is for the horn. I think that the one for black/ white should be for an ammeter. __________________ Ugly or not it still kicks a**!

12-29-2009, 12:37 PM	#6
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,761	Re: Identify a few wires, with pictures. You have the connector 180° out of how it fits into the firewall connector, but here are some pics. of how mine goes. Seems like it is part of the TCS system In that location, mine starts out as brown, then breaks out of the main engine harness and becomes brown/white up on top of the cowl Large green seems to be horns, but didn't look real close at that __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 12-29-2009 at 12:43 PM.

12-29-2009, 12:38 PM	#7
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,134	Re: Identify a few wires, with pictures. That wire wasn't in the diagram but my Jimmy also has that wire. Mine was not hooked to anything? Diagrams sent __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

12-29-2009, 02:28 PM	#9
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,134	Re: Identify a few wires, with pictures. Glad I could help. I can't remember who originally supplied those diagrams but I save everything. I am doing my best to share and help others as they have helped me!! Hope it all works out for you. __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

12-29-2009, 03:50 PM	#10
MickMc Registered User Join Date: Feb 2008 Location: Albuquerque Posts: 359	Re: Identify a few wires, with pictures. Can I request a wiring diagram too? Mick

12-29-2009, 04:48 PM	#11
72 4x4 chevy Registered User Join Date: Dec 2009 Location: Liberty, Ky Posts: 11	Re: Identify a few wires, with pictures. I like to request the wiring diagram also. I have a few wires I`m not sure where they go. rsheene35@hotmail.com Last edited by 72 4x4 chevy; 12-29-2009 at 04:51 PM.

12-29-2009, 08:06 PM	#13
squirel Registered User Join Date: Oct 2003 Location: calgary alberta canada Posts: 198	Re: Identify a few wires, with pictures. Can you please send me a copy of the wiring diagram it would be greatly appreciated thanks squirel@shaw.ca __________________ In some foreign language "merge" means to stop and turn your head left. My build page http://67chev.shawwebspace.ca/

12-29-2009, 08:48 PM	#14
sneakysnake It's a catastrophic success. Join Date: Jan 2003 Location: Oklahoma Posts: 2,077	Re: Identify a few wires, with pictures. Here is the black and white version.Hope they come out so you can read them. Attached Images

12-30-2009, 09:43 AM	#15
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,134	Re: Identify a few wires, with pictures. I do have much higher resolution diagrams if anyone has a way of hosting them so everyone can get a copy? __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205 Last edited by Thealien; 12-30-2009 at 10:06 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.