Anyone Running One Of These? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Scootin 81 C20 · 01-03-2010, 06:43 PM

I am wanting to change out my dual CB antennas for a single stainless steel whip like this one and was wondering if any of you are running one and what kind of results you've gotten out of it?

http://cgi.ebay.com/New-102-Inch-CB-...5#ht_500wt_977

Thanks
Benjamin.

*Stitch* · 01-03-2010, 06:56 PM

if you were closer, I'd give you the one I have sitting in the garage...

Tex_50613 · 01-03-2010, 08:22 PM

I use to have one on one of my trucks, I liked it for longer range but if the weather was crappy so was the reception

**N2TRUX** · 01-03-2010, 08:34 PM

Nothing wrong with a 102, but you will need a spring for the base. You will also need to watch for clearence all the time. If you have a good set of loaded dual's and they are tuned properly you will get better reception.

If your running any additional power, it's hard to tune your SWR's properly with a steel whip.

powerdriver 1958 · 01-03-2010, 08:50 PM

Kind of a funny story.High school buddy had a lifted ford 4by and mounted a whip on the roof!! He went down one of the alleys in the old part of St. Joe Missouri and hit a light wire.............Said it sounded like some lit an M80 in the cab

Scootin 81 C20 · 01-03-2010, 09:05 PM

Quote:

Originally Posted by Fat Hoe

if you were closer, I'd give you the one I have sitting in the garage...

Hoe, where you at. It'd be worth it if I pay the shipping. You can ship it in a piece of PVC.

That is a funny story. Theres a friend of mine that has a F*** 4x4 with a 6"+ lift and he has 2 6ft whips mounted on the toolbox. I'm amazed that he can clear power lines around here.

*Stitch* · 01-03-2010, 09:18 PM

I'd have to measure it to be sure...I used to have it mounted on my K5 blazer on the rear bumper, and would go under the driver's mirror and stay if I needed to get it down out of the way...

I have no problem shipping if that's what you'd like...it also has a spring on the bottom of it...let me pull it out tomorrow and I'll measure it and take some pics of it...

Chuck.

Scootin 81 C20 · 01-03-2010, 09:26 PM

Quote:

Originally Posted by Fat Hoe

I'd have to measure it to be sure...I used to have it mounted on my K5 blazer on the rear bumper, and would go under the driver's mirror and stay if I needed to get it down out of the way...

I have no problem shipping if that's what you'd like...it also has a spring on the bottom of it...let me pull it out tomorrow and I'll measure it and take some pics of it...

Chuck.

Sweet. I'm probably going to mount it to the bumper too. The spring will be great too. I cant wait to see it.

Thanks
Benjamin.

*Stitch* · 01-03-2010, 09:34 PM

no problem

Benelli · 01-03-2010, 09:59 PM

My friend has one on his jeep, and it doesn't work as well as my two antennas but it does get us by.

Sniper X · 01-04-2010, 05:29 PM

Here's the low down on mobile CB antennas. A 102 in whip is pretty good for transmit gain, but they suck bad for receive because they have no noise rejection at all. They also can lead easily to a fregged final output transistor in the radio because the little screw in hot to the antenna goes bad frequantly and no on enotices till the radio stops transmitting, and this happens more frequently in harsh conditions where it rains or snows a lot.

I have had and used pretty much every single antenna over the years and now only use the Wilson base loaded antennas like the 1000, 5000, or even the little wil. These have great noise rejection, and thru reports from others who i talk to they sound superior on transmit to a 102in whip and pretty much everything else as well. I have a 1200w linear that doesn't frag a 5000, and it works great thru the 1000 too. I have two CB's that cost about $400.00 each so need a good reliable antenna, and for me thru 30 years of talking on the CB and being a HAm radio operator, they work the best.

I use the mag mount ones if I can so I can take them off if needed to either keep them from being stolen or to get clearence overhead.

Sniper X · 01-04-2010, 05:31 PM

BTW, dual antennas are only good forward and backwards, not at all to the sides. A single antenna of any kind is omni directional, bot bi directional like a set of dual antennas. Which is why the truckers all use dual antennas, they only want to transmit and receive forward and backwards since all the talking they do is on the freeway. Duals suck big time off road.

Sniper X · 01-04-2010, 05:33 PM

Quote:

Originally Posted by N2TRUX

Nothing wrong with a 102, but you will need a spring for the base. You will also need to watch for clearence all the time. If you have a good set of loaded dual's and they are tuned properly you will get better reception.

If your running any additional power, it's hard to tune your SWR's properly with a steel whip.

You can get a 102in whip to tune, but need the right length spring, and the right spring....all springs that are sold as a 102in whip spring are not the right spring for it. And the spring is the weak point of a 102 in whip set up. Actually the coax mount to the spring is it's weak point.

Scootin 81 C20 · 01-04-2010, 09:59 PM

Ok, so if I'm interpreting what you've said right, a single whip or duals like mine are a poor choice of antenna?

I like the look of duals or a whip. I mainly use my CB when I'm on the interstate or when I meet my dad at the truckstop to find out how far out he is. And that's not that often.

I have an 8ft fiberglass whip, would that work better than a stainless one?

**78 Big10 454** · 01-04-2010, 11:45 PM

http://www.wearecb.com/support/install_antenna.htm

Tex_50613 · 01-05-2010, 03:38 AM

I'v notaced the dual whip directional issue that's one of the reasons that only one of mine is hooked to the cb, the other is hooked to my radio and it gets awesome reception, the last time I had duals hooked up was for cat and mouse (CB tag) and that was so it was easer to locate the mouse

01-03-2010, 06:43 PM	#1
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Anyone Running One Of These? I am wanting to change out my dual CB antennas for a single stainless steel whip like this one and was wondering if any of you are running one and what kind of results you've gotten out of it? http://cgi.ebay.com/New-102-Inch-CB-...5#ht_500wt_977 Thanks Benjamin. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

01-03-2010, 06:56 PM	#2
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Anyone Running One Of These? if you were closer, I'd give you the one I have sitting in the garage...

01-03-2010, 08:22 PM	#3
Tex_50613 Redneck Customs Bumpers, IA Join Date: Nov 2009 Location: Waterloo, IA Posts: 503	Re: Anyone Running One Of These? I use to have one on one of my trucks, I liked it for longer range but if the weather was crappy so was the reception

01-03-2010, 08:34 PM	#4
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Anyone Running One Of These? Nothing wrong with a 102, but you will need a spring for the base. You will also need to watch for clearence all the time. If you have a good set of loaded dual's and they are tuned properly you will get better reception. If your running any additional power, it's hard to tune your SWR's properly with a steel whip. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" Last edited by N2TRUX; 01-03-2010 at 08:35 PM.

01-03-2010, 08:50 PM	#5
powerdriver 1958 Kid's Mechanic Join Date: Nov 2006 Location: Kansas City Posts: 8,241	Re: Anyone Running One Of These? Kind of a funny story.High school buddy had a lifted ford 4by and mounted a whip on the roof!! He went down one of the alleys in the old part of St. Joe Missouri and hit a light wire.............Said it sounded like some lit an M80 in the cab Last edited by powerdriver 1958; 01-03-2010 at 09:07 PM.

01-03-2010, 09:18 PM	#7
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Anyone Running One Of These? I'd have to measure it to be sure...I used to have it mounted on my K5 blazer on the rear bumper, and would go under the driver's mirror and stay if I needed to get it down out of the way... I have no problem shipping if that's what you'd like...it also has a spring on the bottom of it...let me pull it out tomorrow and I'll measure it and take some pics of it... Chuck.

01-03-2010, 09:34 PM	#9
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Anyone Running One Of These? no problem

01-03-2010, 09:59 PM	#10
Benelli Watchin the rust grow Join Date: Oct 2008 Location: Western Nebraska Posts: 950	Re: Anyone Running One Of These? My friend has one on his jeep, and it doesn't work as well as my two antennas but it does get us by. __________________ 1979 Chevy K10 (H/D Front end) - 350 w/ Holley Truck Avenger, Weinald Intake manifold, headers, bored .060 over, mild cam, Built up TH350 (TranStar Shift kit) with a part-timed NP203 t-case SOLD ($3,000) 1997 Chevy Silverado 1500 - 4.3 vortec, extended cab, 21 highway MPG, stock. "Red" SOLD ($3,000) 1987 Toyota 4wd Pick-up - work in progress, future DD SOLD ($1,850) 1998 Dodge Ram 2500 Cummins 5spd Quad cab - old 12 valve with some work done 2004 Chevy Silverado - Black, 4x4, 5.3L, stock for now Underneath that rust is a heart of gold

01-04-2010, 05:29 PM	#11
Sniper X Registered User Join Date: Aug 2009 Location: Albuquerque New mexico Posts: 169	Re: Anyone Running One Of These? Here's the low down on mobile CB antennas. A 102 in whip is pretty good for transmit gain, but they suck bad for receive because they have no noise rejection at all. They also can lead easily to a fregged final output transistor in the radio because the little screw in hot to the antenna goes bad frequantly and no on enotices till the radio stops transmitting, and this happens more frequently in harsh conditions where it rains or snows a lot. I have had and used pretty much every single antenna over the years and now only use the Wilson base loaded antennas like the 1000, 5000, or even the little wil. These have great noise rejection, and thru reports from others who i talk to they sound superior on transmit to a 102in whip and pretty much everything else as well. I have a 1200w linear that doesn't frag a 5000, and it works great thru the 1000 too. I have two CB's that cost about $400.00 each so need a good reliable antenna, and for me thru 30 years of talking on the CB and being a HAm radio operator, they work the best. I use the mag mount ones if I can so I can take them off if needed to either keep them from being stolen or to get clearence overhead.

01-04-2010, 05:31 PM	#12
Sniper X Registered User Join Date: Aug 2009 Location: Albuquerque New mexico Posts: 169	Re: Anyone Running One Of These? BTW, dual antennas are only good forward and backwards, not at all to the sides. A single antenna of any kind is omni directional, bot bi directional like a set of dual antennas. Which is why the truckers all use dual antennas, they only want to transmit and receive forward and backwards since all the talking they do is on the freeway. Duals suck big time off road.

01-04-2010, 09:59 PM	#14
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Anyone Running One Of These? Ok, so if I'm interpreting what you've said right, a single whip or duals like mine are a poor choice of antenna? I like the look of duals or a whip. I mainly use my CB when I'm on the interstate or when I meet my dad at the truckstop to find out how far out he is. And that's not that often. I have an 8ft fiberglass whip, would that work better than a stainless one? __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

01-04-2010, 11:45 PM	#15
78 Big10 454 78 Big10 454 Join Date: Jul 2008 Location: Pismo Beach, CA Posts: 838	Re: Anyone Running One Of These? http://www.wearecb.com/support/install_antenna.htm

01-05-2010, 03:38 AM	#16
Tex_50613 Redneck Customs Bumpers, IA Join Date: Nov 2009 Location: Waterloo, IA Posts: 503	Re: Anyone Running One Of These? I'v notaced the dual whip directional issue that's one of the reasons that only one of mine is hooked to the cb, the other is hooked to my radio and it gets awesome reception, the last time I had duals hooked up was for cat and mouse (CB tag) and that was so it was easer to locate the mouse



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.