Urethane transfercase mount?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Firebirdjones · 01-05-2010, 02:36 PM

Can anyone supply a part number?? I'd like to order this local from Napa or a place similar.

I already have a urethane torque mount,,,just need the main crossmember mount. Thanks.

drunkbus · 01-05-2010, 03:17 PM

Here you go. It took about 30 seconds to find if you just try.

http://www.summitracing.com/parts/ENS-3-1106G/

Firebirdjones · 01-05-2010, 03:30 PM

Are you kidding?? I spent 1/2 hour on here trying to find it on Energy Suspensions website to no avail. I hate these damn computers

**Thealien** · 01-05-2010, 04:48 PM

here they are at their own website
Mounts

and the
TORQUE MOUNTS

drunkbus · 01-05-2010, 04:56 PM

Quote:

Originally Posted by Thealien

here they are at their own website
Mounts

and the
TORQUE MOUNTS

Even better yet. I don't know how to get fancy and change the links.

**Thealien** · 01-05-2010, 04:59 PM

Quote:

Originally Posted by drunkbus

Even better yet. I don't know how to get fancy and change the links.

When you add the link in the box and hit OK, hit enter and then type in whatever you want. Sometimes its better than the long link it ends up being!

swyfor5 · 01-05-2010, 05:58 PM

Got mine from LMC. A little pricer though, $69.95. Ones they sold me were made by PROTHANE. Look identical to those from Summit.

Firebirdjones · 01-05-2010, 07:01 PM

Quote:

Originally Posted by swyfor5

Got mine from LMC. A little pricer though, $69.95. Ones they sold me were made by PROTHANE. Look identical to those from Summit.

Ah yes,,,,thankyou. Prothane was the other name that was escaping me.

Firebirdjones · 01-05-2010, 07:03 PM

Quote:

Originally Posted by Thealien

here they are at their own website
Mounts

and the
TORQUE MOUNTS

Thanks, wish I knew how to do that. I'm terrible at searching

**Thealien** · 01-05-2010, 07:08 PM

Quote:

Originally Posted by Firebirdjones

Thanks, wish I knew how to do that. I'm terrible at searching

It was easy for me only because
I've been there done that

**jaros44sr** · 01-05-2010, 10:01 PM

Be careful on the torque mounts, make sure the bolts fit the spacers well. I ended up calling them and getting new ones, I forget what the part number is, but you will see a big space between the bolt and the spacer if you have the wrong ones. When I talked to customer service, he said no one ever complained in 15 years the part has bin in production

Firebirdjones · 01-05-2010, 11:10 PM

Quote:

Originally Posted by jaros44sr

Be careful on the torque mounts, make sure the bolts fit the spacers well. I ended up calling them and getting new ones, I forget what the part number is, but you will see a big space between the bolt and the spacer if you have the wrong ones. When I talked to customer service, he said no one ever complained in 15 years the part has bin in production

Thanks for the heads up. I'll have to check it out. I haven't even opened the package for the torque mount yet. Since I don't have the main transfer case mount in my hands I figured I'd just wait until then, and do it all at once.

**Thealien** · 01-06-2010, 09:08 AM

Quote:

Originally Posted by jaros44sr

Be careful on the torque mounts, make sure the bolts fit the spacers well. I ended up calling them and getting new ones, I forget what the part number is, but you will see a big space between the bolt and the spacer if you have the wrong ones. When I talked to customer service, he said no one ever complained in 15 years the part has bin in production

Were the bolts to big or small? What was the discrepency? Leave it to you to get the one in 15 year odd duck, should have used that luck on a lottery ticket!

**jaros44sr** · 01-06-2010, 04:58 PM

Quote:

Originally Posted by Thealien

Were the bolts to big or small? What was the discrepency? Leave it to you to get the one in 15 year odd duck, should have used that luck on a lottery ticket!

Yes and yes, depending how you look at it

It seems that their engineering department thought we had 1/2" mounting bolts, but in fact they are 5/'8"(not sure of the of the exact demensions), so you need to ask them for the correct spacer. Seems like everyone was happy with the slop for the past 15 years

Hope this helps, not very good at splainin' things!

**Thealien** · 01-06-2010, 06:04 PM

Nope now I am really confused. If they thought our bolts were 1/2 (4/8ths) and are actually 5/8ths I would think they wouldn't even fit through the spacer let alone be loose?

**jaros44sr** · 01-06-2010, 07:17 PM

Quote:

Originally Posted by Thealien

Nope now I am really confused. If they thought our bolts were 1/2 (4/8ths) and are actually 5/8ths I would think they wouldn't even fit through the spacer let alone be loose?

That's why I said "not sure of the actual demensions". Bolts are 1/2" OD ,spacers are 5/8"ID. Any better? as I say not sure what it was, but considerable space, not the example I used above

Still confused?

**Thealien** · 01-06-2010, 11:24 PM

I could always look at my mounts and bolts? But then I "may" have to make a call and its all your fault!

**jaros44sr** · 01-07-2010, 01:45 AM

Quote:

Originally Posted by Thealien

I could always look at my mounts and bolts? But then I "may" have to make a call and its all your fault!

Depends if you are comfortable with the slop, I wasn't. Must've bin the Machinist in me

Don't shoot the messenger

**Thealien** · 01-07-2010, 09:01 AM

Quote:

Originally Posted by jaros44sr

Depends if you are comfortable with the slop, I wasn't. Must've bin the Machinist in me

Don't shoot the messenger

Never liked a loose fit if you know what I mean.

01-05-2010, 02:36 PM	#1
Firebirdjones Registered User Join Date: Oct 2009 Location: Prescott, Arizona Posts: 2,396	Urethane transfercase mount?? Can anyone supply a part number?? I'd like to order this local from Napa or a place similar. I already have a urethane torque mount,,,just need the main crossmember mount. Thanks.

01-05-2010, 03:17 PM	#2
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: Urethane transfercase mount?? Here you go. It took about 30 seconds to find if you just try. http://www.summitracing.com/parts/ENS-3-1106G/

01-05-2010, 03:30 PM	#3
Firebirdjones Registered User Join Date: Oct 2009 Location: Prescott, Arizona Posts: 2,396	Re: Urethane transfercase mount?? Are you kidding?? I spent 1/2 hour on here trying to find it on Energy Suspensions website to no avail. I hate these damn computers

01-05-2010, 04:48 PM	#4
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,134	Re: Urethane transfercase mount?? here they are at their own website Mounts and the TORQUE MOUNTS __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

01-05-2010, 05:58 PM	#7
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Urethane transfercase mount?? Got mine from LMC. A little pricer though, $69.95. Ones they sold me were made by PROTHANE. Look identical to those from Summit.

01-05-2010, 10:01 PM	#11
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,761	Re: Urethane transfercase mount?? Be careful on the torque mounts, make sure the bolts fit the spacers well. I ended up calling them and getting new ones, I forget what the part number is, but you will see a big space between the bolt and the spacer if you have the wrong ones. When I talked to customer service, he said no one ever complained in 15 years the part has bin in production __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

01-06-2010, 06:04 PM	#15
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,134	Re: Urethane transfercase mount?? Nope now I am really confused. If they thought our bolts were 1/2 (4/8ths) and are actually 5/8ths I would think they wouldn't even fit through the spacer let alone be loose? __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

01-06-2010, 11:24 PM	#17
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,134	Re: Urethane transfercase mount?? I could always look at my mounts and bolts? But then I "may" have to make a call and its all your fault! __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.