bucket seat mount question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NuBomb · 01-18-2010, 11:58 AM

I am considering buying some utility buckets for my blazer. Is the female bracket the bolts to the passenger side floor (locks the seat down) the same for both sport and utility. In other words, are they likely to be found? I think I only need the one piece (assuming the seats I am interested in have all of the others). Thanks.

badpeanut · 01-20-2010, 12:05 AM

The release lever on the utility buckets in this thread is in the center similar to the regular buckets. I have a passenger side utility bucket where the release lever is on the far passenger side. I can get a picture of the bracket for mine if it would help.

NuBomb · 01-20-2010, 12:54 AM

Thanks. I'm pretty sure the latch is on the back of these. I am waiting on a few more pictures of the seats before I pull the trigger. The concern is pulling the trigger knowing I'm going to have to find a bracket. I'm just wondering whether the utility and the sport buckets use the same bracket. I'm thinking same bracket = easier to come by. If they end up being like yours I'll definitely take you up on that. Thanks.

**jaros44sr** · 01-20-2010, 07:53 PM

I just picked up a set of drivers side seat tracks for the passenger side

LMK if badpeanut can't help you out, cause I have both types of passenger seat brackets. There are two differant hieghts of utility seats. I could post them up for sale and let you know

badpeanut · 01-21-2010, 02:06 AM

The bracket on the right is for my regular (not utility) buckets in my '71 Blazer. The bracket on the left is for my utility bucket which has the release lever on the far passenger side. Since these brackets are identical I think we can conclude that they will be in your case, too.

NuBomb · 01-24-2010, 11:38 AM

You guys are great. I'll do a WTB thread in our new section. Thanks a ton.

**jaros44sr** · 01-24-2010, 01:15 PM

Quote:

Originally Posted by NuBomb

You guys are great. I'll do a WTB thread in our new section. Thanks a ton.

Be careful of which seats you buy, one set sits tilted further back and the other set sits in a more uprite position. Just changing seat tracks does not fix the angle that the seat sits in

All rite I'll keep an eye out for it. There isn't much interest in the utility seats, so you may get a good deal. Low n slow gave me a set of frames w/metal backs for nothing, 6t727t2 sold me a set of seats w/ good foam for 200, and the extra seat tracks I bought from krazy ray for 25 shipped to the rite coast
Good people on the board!

Exact matrl. is available to redo them, the embossed matrl. sells for about 80/yd. Thankfully you only need about 2 yds.

Got pics of the ones you're thinking of buying? prices on my parts should be cheap or free, you pay shipping! But, I have to warn you, I do nothing in a hurry

01-18-2010, 11:58 AM	#1
NuBomb Registered User Join Date: Jan 2002 Location: Canton, Georgia, USA Posts: 1,119	bucket seat mount question I am considering buying some utility buckets for my blazer. Is the female bracket the bolts to the passenger side floor (locks the seat down) the same for both sport and utility. In other words, are they likely to be found? I think I only need the one piece (assuming the seats I am interested in have all of the others). Thanks. __________________ Jeremy (NUBOMB) 72K5 CST 350/350/205 1951 Chevy 1/2 ton North Georgia Group "... And the first rule to being a man is you gotta spend your life doing crap you don't wanna do." Red Forman.

01-20-2010, 12:05 AM	#2
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,759	Re: bucket seat mount question The release lever on the utility buckets in this thread is in the center similar to the regular buckets. I have a passenger side utility bucket where the release lever is on the far passenger side. I can get a picture of the bracket for mine if it would help. __________________ '05 Chevy 2500HD 4x4 '72 GMC LWB 4x2 driver '72 Chevy LWB 4x4 plow truck '71 Blazer 4x4 driver '70 GMC LWB trailer

01-20-2010, 12:54 AM	#3
NuBomb Registered User Join Date: Jan 2002 Location: Canton, Georgia, USA Posts: 1,119	Re: bucket seat mount question Thanks. I'm pretty sure the latch is on the back of these. I am waiting on a few more pictures of the seats before I pull the trigger. The concern is pulling the trigger knowing I'm going to have to find a bracket. I'm just wondering whether the utility and the sport buckets use the same bracket. I'm thinking same bracket = easier to come by. If they end up being like yours I'll definitely take you up on that. Thanks. __________________ Jeremy (NUBOMB) 72K5 CST 350/350/205 1951 Chevy 1/2 ton North Georgia Group "... And the first rule to being a man is you gotta spend your life doing crap you don't wanna do." Red Forman.

01-20-2010, 07:53 PM	#4
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,708	Re: bucket seat mount question I just picked up a set of drivers side seat tracks for the passenger side LMK if badpeanut can't help you out, cause I have both types of passenger seat brackets. There are two differant hieghts of utility seats. I could post them up for sale and let you know __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 01-20-2010 at 07:56 PM.

01-21-2010, 02:06 AM	#5
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,759	Re: bucket seat mount question The bracket on the right is for my regular (not utility) buckets in my '71 Blazer. The bracket on the left is for my utility bucket which has the release lever on the far passenger side. Since these brackets are identical I think we can conclude that they will be in your case, too. Attached Images __________________ '05 Chevy 2500HD 4x4 '72 GMC LWB 4x2 driver '72 Chevy LWB 4x4 plow truck '71 Blazer 4x4 driver '70 GMC LWB trailer

01-24-2010, 11:38 AM	#6
NuBomb Registered User Join Date: Jan 2002 Location: Canton, Georgia, USA Posts: 1,119	Re: bucket seat mount question You guys are great. I'll do a WTB thread in our new section. Thanks a ton. __________________ Jeremy (NUBOMB) 72K5 CST 350/350/205 1951 Chevy 1/2 ton North Georgia Group "... And the first rule to being a man is you gotta spend your life doing crap you don't wanna do." Red Forman.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.