Your Dream 67-72? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Reumster · 03-24-2002, 11:45 PM

What is everyones dream 67-72?? Or any vehicle for that matter. If money was know factor this is my sick dream. I more like to think of it as a goal.

THIS IS THE LIST ON MY 1972 2WD BLAZER

TWIN TURBO SOHC 350 1200HP
JET 4L80E
CARBON FIBER DRIVELINES
AWD CONVERSION SYCLONE TRANSFER CASE(SEEN THE SUMMIT QUADRA DUECE?)
Lightened frame
22"X10" ALLROUND
EXTREME AIR RIDE SET-UP
HIDEN HITCH
TRUE HID
CUSTOM LED TAILLIGHTS
Escalade SEATS AND INTERIOR
VOICE ACTIVATED EVERYTHING
POWER EVERYTHING
A/C TILT
35 GAL ALUMINUM GAS TANK,
AND A SMALL TANK FOR ALOCHOL.
FULL FIBER GLASS FRONT CLIP AND BODY
ROLL CAGE
RHINO LINED INTERIOR, THEN CARPET
ALL BOLTS AND NUTS TITANUIM,OR ALUMINUM
CUSTOM LEXAN TYPE GLASS REPLACEMENT

UM YOU KNOW YOUR BASIC 10 SECOND LUXURY 1972 BLAZER! THATS MY SICK DEMENTED DREAM

GET REAL!

------------------
1972 2wd Blazer, 350/700R4/3:73 posi/NOS. Power is nothing without control!

Longhorn Man · 03-24-2002, 11:55 PM

A '68 one ton Longhorn 50th annv with all the trimmings.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
Need to pick up the one ton Longhorn with a PONTIAC 350/350soon.
Thanks every one!

Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

72gmc1/2ton · 03-25-2002, 12:06 AM

any 67-72 that has no rust and hasn't had a pervious owner who blows up the 350 and 3:73 pos. rearend and replaces it with a gutless 4bbl-307 and non-pos rearend.THATS MY DREAM TRUCK!!!!!!!!!!

neonlarry · 03-25-2002, 12:06 AM

If I had the money I would probably build about 10 67-72s, but the first would be a GMC 3/4 ton 4x4 with 1 ton axles and transfer case, a Caddy 500 big block, a TH475 tranny, and about 35 inch tires

Project1970 · 03-25-2002, 12:15 AM

My dream '67-'72:

Take Rick's pickup, convert it to a GMC, put a 4L80E in it, put red taillights back on it, and drop some of the exterior trim...along with Torq-Thrust rims...and change the shade of blue a bit...

Hmm...now that I think about it, I want Rick's truck with my truck's body and a 4L80E. Muahaha. =)

Of course, I'd ideally have a second one as well; that one as my daily driver / street cruiser and then a GMC Jimmy with the '69/'70 grille, disc brakes, a nice lift, same blue color (hehe), a 383 Vortec, and a THM400. Fun off road but I loathe the idea of driving something like that around town.

Then, despite the fact that it's not a '67-'72 GM truck, the third vehicle in my fleet would be my track-day-special, a '67-'73 Camaro (any first gen or an early second) with a twin turbo fuel injected 302 LS6 and the IRS / 6 speed transaxle yanked from a Corvette.

------------------
Project 1970 - soon to be seen at http://milhouse.treylis.org:81/

Alvin · 03-25-2002, 12:31 AM

I happen to like the way this one looks, can't remember where i got the picture though:

umm, vortech supercharged 383 (~570hp), 700R4, 3.73 rear, 4-wheel wilwood discs, air ride of course, custom interior (fiberglass center console constructed by yours truly, bucket seats of some sort), blazer doors (for the absence of the pillar, 18" wheels in front, 20" wheels in back, umm i guess that's about it. Still debating on stepside or fleetside though. My dream changes every time I get interested in another truck though!!

------------------
- Adam L. Vogel
I go to Raymond Walters (University of Cincinnati)
Hope to own a truck soon! Jim Aust's Circus Wagon is my inspiration.

jostrans68 · 03-25-2002, 12:42 AM

Time machine so I cn go to 68 and order it the way I want. and bring it back.......

------------------
68 c20 in progress 327 TH400 tach dash Disc Brakes and soon 3.90 rear gears.. have many new parts now just need the time..... Sound Familar

*racedvl* · 03-25-2002, 12:16 PM

Here is one of my sick twisted dream 67-72.

1972 C-5 Blazer.
292 CID - hopped up a little.
88 and up 700R4
3.07 or 3.42 Pozi (can we say cross country cruz'n?)
A/C
A ton of guages
Super comfortable seats
Tilt
Carpet
Alu. slots
1968 front clip
Simple 2/4 drop
That deep blue on newer trucks
Power steering / power brake

------------------

http://hometown.aol.com/racedvl/racedvl69index.html

Woodstock,IL.northwest of Chicago

It's not what you buy, it's what you build!!

I did not climb to the top of the food chain, to become a vegetarian.

For some pics of my truck.

NSANE68!!! · 03-25-2002, 12:21 PM

I'm building it. I will let ya know how it turns out. lol

------------------
68chevy, 95step bed, euro taillights, fastbags, fully shaved, phantom grill, 350 with a small huffer, TH350, 12bolt Auburn posi 4:11's......... 95 Chevy Tahoe (PHATHOE) all mouldings and emblems stripped, 4/4 drop, Niche Bellas 18's, billet grill, Euro taillights, clear corners, billet antena & wiper covers, leather interior, Pioneer cd, alpine amp, Rockford 15's.......... 97 CBR 900 RR, everything that is aluminum was polished or powdercoated candy purple, 6 color change Chameleon paint at $300 a pint(ouch), custom one of a kind under seat exaust, hand cut decals, runs 11 flat at 126mph FUUUUUUUUUUUUUUN!!!!!!!! ............ my toys at http://communities.msn.com/NSANE68Tr...s/shoebox.msnw

lukecp · 03-25-2002, 12:29 PM

Well, it would be my truck with:

Frame off restoration

Repainted original Ochre color, 2-tone with the white stripe and top, clearcoat paint

Lowered 4" front 5" rear

Built 383 SBC with allumium heads, and a supercharger (the kind that sits off to the side of the engine so i dont have to cut a hole in the hood), nitrous also for about 600 HP

4L80E OD tranny, also built to handle the power

18" American Racing Torq-Thrust Wheels

Then i would have a stock body truck, but lowered, with cool wheels, and 600 ponies under the hood

------------------
Lucas

drop_shift@hotmail.com

My Daily-Driver: '72 Chevy LWB Custom/10. Rebuilt 350, 300 HP thanks to a few go-fast goodies. Ochre with a white top. Future plans include a frame off restoration, and maybe a blown 383.

72chevyLWB · 03-25-2002, 01:49 PM

Lets see just like mine except I want extended cab short box, 500+hp engine and tub it with Corvette suspension and some 17X15 wheels in back.

... forgot the air bag suspension
------------------
72 Chevy C/10
87 Chevy Silverado 4X4 www.geocities.com/chevylwb/chevylwb.html
Aberdeen South Dakota

[This message has been edited by 72chevyLWB (edited March 25, 2002).]

**1971Stepside** · 03-25-2002, 02:11 PM

Since you said money was no object. I always thought it would be cool to have my 71 stepside completely done and have a 71 2WD Blazer and a 71 Shortbed Fleetside that all matched. Meaning same color, features, etc. That would be a rolling car show in itself!

The flipside of the coin would be to find a 71-72 3/4 ton 4WD Long bed that was perfect.

My goal for my 40th birthday (other than having my truck finished) is to find a cherry 69 Z-28 Convertible. SS would be fine, but the plus here is that the wife wants this car as bad as I do.....

------------------
2001 GMC 2500HD Crew Cab Duramax, Allison, 4WD, Love it

1971 Chevrolet 1/2 ton 2WD Short/Step Side. In process of frame off restoration

Mudder · 03-25-2002, 03:43 PM

I guess I have my dream truck but I'm dreaming again.

------------------
67 stepside 4x4 Owensville MO mudder67@hotmail.com

Jesse 67 c-10 · 03-25-2002, 10:19 PM

Well, while I'm dreaming, tubular aluminum space frame, extreamly light, ridgid and strong. custom designed 4 wheel independant suspension with air ride, rack and pinnion steering, all aluminum 427 bb, set well back quad overhead cams, twin turbos, tricked out fuel injection, around 800 hp, stainless steel headers and exhaust, dual 3", 5 speed lenco tranny, or a 6 speed, 4 wheel disks, 17" cragar ss wheels, complete glass body, total weight of truck 2500 lbs, close to 50/50 weight dist. rad, bat, everything mounted in back, ram air takes place of rad in front. 67 style body, slightly smoothed, not extreme, orig side trim, beautiful bright red with white top, unscratchable paint, classic looking. still with crome bumpers. Cream leather interior, a good stereo, a/t/c, power everything, top quality, premium, sounds, looks, feels and works nice. Handles like a formula one car, rides like a caddy, completely driveable, 200mph, 0-60 in 3.5 sec, pulls over 1 g in accel, and cornering, perfect.
droooool!!!!!
man! I wish!
well, you said I could dream!
Jesse

------------------
Near Saskatoon, Saskatchewan, Canada. 67 c-10, Long fleet, Newly swapped front disks, 5 lug rear end, 327 v-8 with Vortech heads, edlbrock performer rpm air gap manifold, 1406 carb and comp XE 256 cam. Backed by a getrag 5 speed and 1 piece driveshaft. Finnally running, almost driving! www.geocities.com/chevy67jesse

toms68cst · 03-25-2002, 11:28 PM

Bone stock-68 Short Wide, red with white top or 50th colors, full chrome, Factory 293 or 307 with an OD three-speed column tranny. (327 and 396 could not be had with OD I think.)

CST, factory tach, speed warn, AC, buckets and full wheel covers would be all nice too.

Another great find would be a 68 3/4 ton Longhorn 50th loaded. (Like Longhornmail said)

------------------
Unrestored 68 C-10 CST. 327 4-Speed. 48,000 miles.
Bismarck, ND

See My truck and rare 1967 prototype pictures at:
http://community.webshots.com/user/toms68cst

MSN Messeger: toms68cst@hotmail.com

rednecknate · 03-25-2002, 11:46 PM

1 off everthing ive ever seen in STREETTRUCKS,TRUCKIN,SPORTTRUCK,SUPERROD,HOTROD,AND PENTHOUSE oh and my sub to be done

bgbchevy · 03-25-2002, 11:46 PM

I would turn my truck into a 1 ton extended cab dually, lift it up a little, and put some clearance lights on it.

Cant get webshots to work anymore so here is a link to a truck similar to what mine would be like.
http://community.webshots.com/script...ity=lRSENLFVoq
------------------
1972 Chevrolet C/20 LWB, BB 402, Tach, Bedside Toolbox, Posi, Factory AC, Factory AM/FM

[This message has been edited by bgbchevy (edited March 25, 2002).]

brad2 · 03-25-2002, 11:49 PM

I am considering some changes for my 2wd Jimmy. Probably just dreaming about it though. It's already bagged and on 20's so that is covered. It is a 71 and I would like a 67-68 hood. It would have an LS-1 and 4L60e and the fire wall would be cleaned up a bit (the firewall is going to happen). Upgrade the brakes a bit. Put the corvette sytle door handles on it and do something about the gas filler neck. The big changes are in the top though. I would graft the rear portion of a surburban top onto it. It would get about a 1.5 to 2 inch chop by laying the windshield post back and the crown in the top would be sectioned a bit. One piece glass in the doors, it would work since the doors would now be from a surburban. Leather interior and a nice but invisible stereo system. Isn't funny how un-trucklike a lot of our dream vehicles are.

Alvin I have personally laid my eyes on the truck you pictured and it is even nicer looking in person. The green and white on it was an awesome color combo.

O'l Buck · 03-26-2002, 02:18 AM

My dream pickup has been a dream since I was about 7 years old. My dad has a 67 3/4 ton 4X4, the first vehicle I ever drove. I fell in love with it and drove it alot when I was growing up on the farm, This poor old truck hasn't had a current liscense plate since 1983 and hasn't seen pavement in about as long. I almost cried when he put a feedwagon box on it and I laughed when the box fell apart. Now it sits on the hill, collecting dust, rust and anything else that my bump into it. I've been trying to buy this thing since I was 15, no luck yet. I'm gonna make a deal with him to let me overhaul the engine in return for him giving me the truck when he doesn't need it anymore(inheritance, you might say). The body is anything but straight, except for the hood and the top of the cab, the interior is very nice, though, seat isn't even ripped. Mark my words, someday I will own that pickup!!!!

------------------
'72 Chevy 1/2T 4x4 shortbox stepside 350/350auto on '84
ralleys and 31/10.5s

67 Cutlass convertible
330, 3spd stick

90 GMC Jimmy
350/auto
Chad Stephens
Orleans,NE

frogsmakr · 03-26-2002, 07:47 PM

'68 short wide cst..w/396, th400,posi,air & BLACK

Cheyenne Super · 03-26-2002, 08:01 PM

So far no one truck would fullfill my dream.
It would take about 12-15 trucks. Including a few burbs k/5s and 4x4's.

*nucleus* · 03-26-2002, 08:11 PM

I just want the monkey**** brown '69 K20 lwb stepside from the sales brochure

------------------
: 69 C20
: anything with tits or wheels is nothing but trouble ...

03-24-2002, 11:45 PM	#1
Reumster L.E.D. Freak Join Date: Jan 2002 Location: Polson MT Posts: 1,358	Your Dream 67-72? What is everyones dream 67-72?? Or any vehicle for that matter. If money was know factor this is my sick dream. I more like to think of it as a goal. THIS IS THE LIST ON MY 1972 2WD BLAZER TWIN TURBO SOHC 350 1200HP JET 4L80E CARBON FIBER DRIVELINES AWD CONVERSION SYCLONE TRANSFER CASE(SEEN THE SUMMIT QUADRA DUECE?) Lightened frame 22"X10" ALLROUND EXTREME AIR RIDE SET-UP HIDEN HITCH TRUE HID CUSTOM LED TAILLIGHTS Escalade SEATS AND INTERIOR VOICE ACTIVATED EVERYTHING POWER EVERYTHING A/C TILT 35 GAL ALUMINUM GAS TANK, AND A SMALL TANK FOR ALOCHOL. FULL FIBER GLASS FRONT CLIP AND BODY ROLL CAGE RHINO LINED INTERIOR, THEN CARPET ALL BOLTS AND NUTS TITANUIM,OR ALUMINUM CUSTOM LEXAN TYPE GLASS REPLACEMENT UM YOU KNOW YOUR BASIC 10 SECOND LUXURY 1972 BLAZER! THATS MY SICK DEMENTED DREAM GET REAL! ------------------ 1972 2wd Blazer, 350/700R4/3:73 posi/NOS. Power is nothing without control! __________________ Specializing in Custom L.E.D. inserts. http://www.ccled.com/ Contact me @ blazer2wd1972@hotmail.com (406)675-8082 or Joel @ jmcwaters@eps-corp.net 1972 2wd Blazer, 350/700R4/3:73 posi, err & Custom L.E.D. inserts! LOL

03-25-2002, 12:06 AM	#4
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	If I had the money I would probably build about 10 67-72s, but the first would be a GMC 3/4 ton 4x4 with 1 ton axles and transfer case, a Caddy 500 big block, a TH475 tranny, and about 35 inch tires __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

03-25-2002, 12:15 AM	#5
Project1970 14.1 @ 96MPH Join Date: Jul 2001 Location: Mesa, AZ Posts: 2,811	My dream '67-'72: Take Rick's pickup, convert it to a GMC, put a 4L80E in it, put red taillights back on it, and drop some of the exterior trim...along with Torq-Thrust rims...and change the shade of blue a bit... Hmm...now that I think about it, I want Rick's truck with my truck's body and a 4L80E. Muahaha. =) Of course, I'd ideally have a second one as well; that one as my daily driver / street cruiser and then a GMC Jimmy with the '69/'70 grille, disc brakes, a nice lift, same blue color (hehe), a 383 Vortec, and a THM400. Fun off road but I loathe the idea of driving something like that around town. Then, despite the fact that it's not a '67-'72 GM truck, the third vehicle in my fleet would be my track-day-special, a '67-'73 Camaro (any first gen or an early second) with a twin turbo fuel injected 302 LS6 and the IRS / 6 speed transaxle yanked from a Corvette. ------------------ Project 1970 - soon to be seen at http://milhouse.treylis.org:81/ __________________ Project1970 - LS1 Swap Complete!

03-25-2002, 12:31 AM	#6
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	I happen to like the way this one looks, can't remember where i got the picture though: umm, vortech supercharged 383 (~570hp), 700R4, 3.73 rear, 4-wheel wilwood discs, air ride of course, custom interior (fiberglass center console constructed by yours truly, bucket seats of some sort), blazer doors (for the absence of the pillar, 18" wheels in front, 20" wheels in back, umm i guess that's about it. Still debating on stepside or fleetside though. My dream changes every time I get interested in another truck though!! ------------------ - Adam L. Vogel I go to Raymond Walters (University of Cincinnati) Hope to own a truck soon! Jim Aust's Circus Wagon is my inspiration. __________________ Ethel - The Legend Continues... Ethel has been sold.

03-25-2002, 12:42 AM	#7
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	Time machine so I cn go to 68 and order it the way I want. and bring it back....... ------------------ 68 c20 in progress 327 TH400 tach dash Disc Brakes and soon 3.90 rear gears.. have many new parts now just need the time..... Sound Familar __________________ [CGTW Member former 67-72 now with a 96 silverado

03-24-2002, 11:55 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	A '68 one ton Longhorn 50th annv with all the trimmings. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. Need to pick up the one ton Longhorn with a PONTIAC 350/350soon. Thanks every one! Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio

03-25-2002, 12:06 AM	#3
72gmc1/2ton Registered User Join Date: Feb 2002 Location: englewood co usa Posts: 94	any 67-72 that has no rust and hasn't had a pervious owner who blows up the 350 and 3:73 pos. rearend and replaces it with a gutless 4bbl-307 and non-pos rearend.THATS MY DREAM TRUCK!!!!!!!!!!

03-25-2002, 12:16 PM	#8
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Here is one of my sick twisted dream 67-72. 1972 C-5 Blazer. 292 CID - hopped up a little. 88 and up 700R4 3.07 or 3.42 Pozi (can we say cross country cruz'n?) A/C A ton of guages Super comfortable seats Tilt Carpet Alu. slots 1968 front clip Simple 2/4 drop That deep blue on newer trucks Power steering / power brake ------------------ http://hometown.aol.com/racedvl/racedvl69index.html Woodstock,IL.northwest of Chicago It's not what you buy, it's what you build!! I did not climb to the top of the food chain, to become a vegetarian. For some pics of my truck.

03-25-2002, 12:21 PM	#9
NSANE68!!! SLICER AND DICIER Join Date: May 2001 Location: Quuen Creek Posts: 1,383	I'm building it. I will let ya know how it turns out. lol ------------------ 68chevy, 95step bed, euro taillights, fastbags, fully shaved, phantom grill, 350 with a small huffer, TH350, 12bolt Auburn posi 4:11's......... 95 Chevy Tahoe (PHATHOE) all mouldings and emblems stripped, 4/4 drop, Niche Bellas 18's, billet grill, Euro taillights, clear corners, billet antena & wiper covers, leather interior, Pioneer cd, alpine amp, Rockford 15's.......... 97 CBR 900 RR, everything that is aluminum was polished or powdercoated candy purple, 6 color change Chameleon paint at $300 a pint(ouch), custom one of a kind under seat exaust, hand cut decals, runs 11 flat at 126mph FUUUUUUUUUUUUUUN!!!!!!!! ............ my toys at http://communities.msn.com/NSANE68Tr...s/shoebox.msnw __________________ 01 Tahoe 22's 2/4 drop and tv's 68 chevy money pit 51 chevy belair 95 Honda 900RR 05 GMC Siearra (company truck)

03-25-2002, 12:29 PM	#10
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	Well, it would be my truck with: Frame off restoration Repainted original Ochre color, 2-tone with the white stripe and top, clearcoat paint Lowered 4" front 5" rear Built 383 SBC with allumium heads, and a supercharger (the kind that sits off to the side of the engine so i dont have to cut a hole in the hood), nitrous also for about 600 HP 4L80E OD tranny, also built to handle the power 18" American Racing Torq-Thrust Wheels Then i would have a stock body truck, but lowered, with cool wheels, and 600 ponies under the hood ------------------ Lucas drop_shift@hotmail.com My Daily-Driver: '72 Chevy LWB Custom/10. Rebuilt 350, 300 HP thanks to a few go-fast goodies. Ochre with a white top. Future plans include a frame off restoration, and maybe a blown 383. __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

03-25-2002, 01:49 PM	#11
72chevyLWB Got 20's???? Join Date: Oct 2001 Location: Aberdeen SD Posts: 1,451	Lets see just like mine except I want extended cab short box, 500+hp engine and tub it with Corvette suspension and some 17X15 wheels in back. ... forgot the air bag suspension ------------------ 72 Chevy C/10 87 Chevy Silverado 4X4 www.geocities.com/chevylwb/chevylwb.html Aberdeen South Dakota [This message has been edited by 72chevyLWB (edited March 25, 2002).] __________________ 99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road.

03-25-2002, 02:11 PM	#12
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Since you said money was no object. I always thought it would be cool to have my 71 stepside completely done and have a 71 2WD Blazer and a 71 Shortbed Fleetside that all matched. Meaning same color, features, etc. That would be a rolling car show in itself! The flipside of the coin would be to find a 71-72 3/4 ton 4WD Long bed that was perfect. My goal for my 40th birthday (other than having my truck finished) is to find a cherry 69 Z-28 Convertible. SS would be fine, but the plus here is that the wife wants this car as bad as I do..... ------------------ 2001 GMC 2500HD Crew Cab Duramax, Allison, 4WD, Love it 1971 Chevrolet 1/2 ton 2WD Short/Step Side. In process of frame off restoration __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

03-25-2002, 03:43 PM	#13
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	I guess I have my dream truck but I'm dreaming again. ------------------ 67 stepside 4x4 Owensville MO mudder67@hotmail.com

03-25-2002, 10:19 PM	#14
Jesse 67 c-10 Registered User Join Date: Feb 2000 Location: Edmonton, Alberta, Canada Posts: 599	Well, while I'm dreaming, tubular aluminum space frame, extreamly light, ridgid and strong. custom designed 4 wheel independant suspension with air ride, rack and pinnion steering, all aluminum 427 bb, set well back quad overhead cams, twin turbos, tricked out fuel injection, around 800 hp, stainless steel headers and exhaust, dual 3", 5 speed lenco tranny, or a 6 speed, 4 wheel disks, 17" cragar ss wheels, complete glass body, total weight of truck 2500 lbs, close to 50/50 weight dist. rad, bat, everything mounted in back, ram air takes place of rad in front. 67 style body, slightly smoothed, not extreme, orig side trim, beautiful bright red with white top, unscratchable paint, classic looking. still with crome bumpers. Cream leather interior, a good stereo, a/t/c, power everything, top quality, premium, sounds, looks, feels and works nice. Handles like a formula one car, rides like a caddy, completely driveable, 200mph, 0-60 in 3.5 sec, pulls over 1 g in accel, and cornering, perfect. droooool!!!!! man! I wish! well, you said I could dream! Jesse ------------------ Near Saskatoon, Saskatchewan, Canada. 67 c-10, Long fleet, Newly swapped front disks, 5 lug rear end, 327 v-8 with Vortech heads, edlbrock performer rpm air gap manifold, 1406 carb and comp XE 256 cam. Backed by a getrag 5 speed and 1 piece driveshaft. Finnally running, almost driving! www.geocities.com/chevy67jesse __________________ Edmonton, Alberta, 67 c-10, Long fleet, front disks, 5 lug rear end, 327 with Vortechs, edlbrock manifold, comp cams XE 256, 600cfm carb. Backed by a getrag 5 speed and 1 piece driveshaft. 1993 Dihatsu Hijet Jumbo cab 4x4, currently converting to battery electric power.

03-25-2002, 11:28 PM	#15
toms68cst Registered User Join Date: Jun 2000 Location: Bismarck, ND Posts: 4,293	Bone stock-68 Short Wide, red with white top or 50th colors, full chrome, Factory 293 or 307 with an OD three-speed column tranny. (327 and 396 could not be had with OD I think.) CST, factory tach, speed warn, AC, buckets and full wheel covers would be all nice too. Another great find would be a 68 3/4 ton Longhorn 50th loaded. (Like Longhornmail said) ------------------ Unrestored 68 C-10 CST. 327 4-Speed. 48,000 miles. Bismarck, ND See My truck and rare 1967 prototype pictures at: http://community.webshots.com/user/toms68cst MSN Messeger: toms68cst@hotmail.com __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club.



Register or Log In To remove these advertisements.

03-25-2002, 11:46 PM	#16
rednecknate Registered User Join Date: Mar 2002 Location: prescott az Posts: 20	1 off everthing ive ever seen in STREETTRUCKS,TRUCKIN,SPORTTRUCK,SUPERROD,HOTROD,AND PENTHOUSE oh and my sub to be done

03-25-2002, 11:46 PM	#17
bgbchevy Registered User Join Date: Aug 2001 Location: College Station, Texas Posts: 486	I would turn my truck into a 1 ton extended cab dually, lift it up a little, and put some clearance lights on it. Cant get webshots to work anymore so here is a link to a truck similar to what mine would be like. http://community.webshots.com/script...ity=lRSENLFVoq ------------------ 1972 Chevrolet C/20 LWB, BB 402, Tach, Bedside Toolbox, Posi, Factory AC, Factory AM/FM [This message has been edited by bgbchevy (edited March 25, 2002).] __________________ 1972 Chevrolet C/20 LWB, BB 402, Tach, Bedside Toolbox, Posi, Factory AC, Factory AM/FM, cruise, Dana 60

03-25-2002, 11:49 PM	#18
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,058	I am considering some changes for my 2wd Jimmy. Probably just dreaming about it though. It's already bagged and on 20's so that is covered. It is a 71 and I would like a 67-68 hood. It would have an LS-1 and 4L60e and the fire wall would be cleaned up a bit (the firewall is going to happen). Upgrade the brakes a bit. Put the corvette sytle door handles on it and do something about the gas filler neck. The big changes are in the top though. I would graft the rear portion of a surburban top onto it. It would get about a 1.5 to 2 inch chop by laying the windshield post back and the crown in the top would be sectioned a bit. One piece glass in the doors, it would work since the doors would now be from a surburban. Leather interior and a nice but invisible stereo system. Isn't funny how un-trucklike a lot of our dream vehicles are. Alvin I have personally laid my eyes on the truck you pictured and it is even nicer looking in person. The green and white on it was an awesome color combo. __________________ 74 swb 71 2wd Jimmy 82 2wd Blazer

03-26-2002, 02:18 AM	#19
O'l Buck Recovering Truck Driver Join Date: Mar 2002 Location: Orleans, NE USA Posts: 1,883	My dream pickup has been a dream since I was about 7 years old. My dad has a 67 3/4 ton 4X4, the first vehicle I ever drove. I fell in love with it and drove it alot when I was growing up on the farm, This poor old truck hasn't had a current liscense plate since 1983 and hasn't seen pavement in about as long. I almost cried when he put a feedwagon box on it and I laughed when the box fell apart. Now it sits on the hill, collecting dust, rust and anything else that my bump into it. I've been trying to buy this thing since I was 15, no luck yet. I'm gonna make a deal with him to let me overhaul the engine in return for him giving me the truck when he doesn't need it anymore(inheritance, you might say). The body is anything but straight, except for the hood and the top of the cab, the interior is very nice, though, seat isn't even ripped. Mark my words, someday I will own that pickup!!!! ------------------ '72 Chevy 1/2T 4x4 shortbox stepside 350/350auto on '84 ralleys and 31/10.5s 67 Cutlass convertible 330, 3spd stick 90 GMC Jimmy 350/auto Chad Stephens Orleans,NE __________________ 67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska

03-26-2002, 07:47 PM	#20
frogsmakr Registered User Join Date: Feb 2000 Location: Sherwood AR Posts: 553	'68 short wide cst..w/396, th400,posi,air & BLACK __________________ 67 C-10 shortwide '06 Triumph Thruxton '09 Harley 'Lectra Glide '95 Z-71 two door Tahoe

03-26-2002, 08:01 PM	#21
Cheyenne Super Registered User Join Date: Mar 2002 Location: Efland, NC Posts: 303	So far no one truck would fullfill my dream. It would take about 12-15 trucks. Including a few burbs k/5s and 4x4's. __________________ 1971 Cheyenne Super Soon to be converted to '68 front clip. Efland, NC

03-26-2002, 08:11 PM	#22
nucleus Account Suspended Join Date: Dec 2001 Location: U$A Posts: 896	I just want the monkey**** brown '69 K20 lwb stepside from the sales brochure ------------------ : 69 C20 : anything with tits or wheels is nothing but trouble ...

Register or Log In To remove these advertisements.