NY Need money quick sale!!!

[b454rat]

Buddy has a NV4500 complete from a 94 dually, need to get some money within the next week to get it.

Tach dash year unknown, has volts, mech oil gauge. Doesn't look too bad, some of the lettering is faded and one tab on the left is missing. I can't remember where I got this one, $125 shipped.

Dana 44 heavy duty external hubs, pulled from a Ford, red dials, these have to be the nicest set of hubs I've ever seen. The red isn't even faded, chrome is in good shape, it's missing the bolts, I used them on my truck, all but 1 bolt per side was busted. $150 shipped for these.

NP205 PTO with shafts. Single speed, no controls, no tags or numbers, but I know it came off a 205, I sat under the truck and pulled it off myself. I was looking for one years ago, but now that I'm NOT looking I find one. $150 shipped.

NP205/adapter off 86 1 ton, shift rails are froze, stuck in 4wd. I had this in my truck before I swapped cases, didn't feel like tearing it apart when I had another one sitting there. This will bolt up to a SM-465 tranny with the 32 spline output, think it's from 84 and up?? Replaces the 208. I think I still have the shifter. $250 shipped, but need to check, never shipped a t-case before.

I will get pics up later, probly over the weekend. I have a pic of the tach dash, just need to find it. Any questions drop me a PM. Paypal is fine.

[Stitch]

if the NV4500 will bolt up to a 6.2 and bolt into a 87 crewcab, I'll take it depending on price...thanks...put me first in line...

Chuck.

[joe231]

I think b454rat is trying to raise money to buy the NV4500

[Stitch]

lol...ok I see that now...just read NV4500 and my eyes went cross eye'd...

[b454rat]

I think I will sell it anyways IF I get it, buddy is hurtin' for money, knowing him he will sell it for a couple hundred and a case of beer. I already have a 4500, and since that one is from a 94, it won't work for my Cummins build.

[joe231]

BTW
I got the box today!
Thanks!!
and to everyone else...I highly recommend buying from Joe here

[b454rat]

Thanks for the kind words, glad you got the box and still in one piece.....

[joe231]

Yeah
mostly one piece
one of the back pieces that the gauges bolt into got a tab broke off in shipping...wasn't a big deal though with all the extra ones

[Stitch]

awesome...so you wound up getting all the tach dashes...now start making some money darn it...lol

and b454rat, I still wanna be first in line for the nv4500

[b454rat]

Here is a pic of the tach, too friggin cold to get pics of the other stuff.....

[Jared's 87]

Would the tach dash bolt up to my 87?

[Stitch]

yep...the tach is wired seperately...you may have to repin the connector but it's easy...you just set the two side by side and repin the new one so the wires goto the same place as the old one...

and that tach dash is nice man...

[Jared's 87]

Originally Posted by Fat Hoe

yep...the tach is wired seperately...you may have to repin the connector but it's easy...you just set the two side by side and repin the new one so the wires goto the same place as the old one...

and that tach dash is nice man...

Thanks for the reply Chuck, definetely thinking hard about it now. This might be a silly question, but will the fuel guage on this one work with the dual tanks? Also, bout to buzz you about some parts you have as well Chuck


Jared

[Stitch]

Originally Posted by Jared's 87

Thanks for the reply Chuck, definetely thinking hard about it now. This might be a silly question, but will the fuel guage on this one work with the dual tanks? Also, bout to buzz you about some parts you have as well Chuck


Jared

no prob...it should work just fine once you repin the connector...it should switch between tanks just like your old one...

[b454rat]

The gauge doesn't if it's dual tank or not, still only reads off one tank. The motors are the same gauges are the same, just with a smaller face than the bigger style.

If I had the wiring I could tell you if it would plug and play, but didnt' get it with it so dont' want to say it will work, then you plug it in and fry the wires in your truck. It's not hard to move the pins or rewire to get it to work.

[JimmyFloyd]

hrm... I could use an NV4500 and am local. If you can't raise the funds, or want to sell it, let me know. Would be nice to have an overdrive when I get the blazer on the road.

[b454rat]

I'm trying to buy that 4500, not sell it just yet. I'm short on funds, why I'm trying to sell this stuff.

[b454rat]

I'll get some pics this weekend.

[b454rat]

Buddy still has the tranny, so I still have a shot, BUT NEED TO SELL SOMETHING!!! pics are coming later 2day.

[b454rat]

Couple shots of the lockouts. I have the spacer that goes behind these, and the snap rings, but don't have the bolts. But they are available at any hardware store.