Big block chevy truck heat stove - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72skytop · 05-01-2003, 05:53 PM

I am looking for the heat stove that goes on the left exhaust manifold for my 1971 Chevrolet Cheyenne 10, 402 big block truck. Does anybody have one or know where I can find one? I will also need the tube that attaches it to the air cleaner snout.

Thanks

Kevin Korff

kevinkorff@att.net

Roberty · 05-05-2003, 09:27 PM

It's a shame someone doesn't repo these. Small block setup also would be nice as well as original spark plug shields. Hope you find some.

MOTHERTRUCKERS · 05-06-2003, 06:56 AM

I have an original complete big block heat stove off a 71 that i'm trying to get reproduced at a local stamping company but it could be months before the tooling is done. No cost estimate yet.

72skytop · 05-06-2003, 11:16 AM

God bless you, Mothertruckers. I have tried to buy a couple from other people who have pitched their manifolds for headers, but they never seem to want to give it up for any price. It seems to me that if you are going the header route, you obviously don't care about originality and would be happy to sell the heat stove and the pipe! Does Mothertruckers have a catalog? Can I get on a mailing list that would keep me informed as to when this will be ready for sale? And just for curiosity, if you had an original issue heat stove and tube to sell, what would you ask for it? I have no idea what fair market value is for one.

Thanks so much for taking the time to reply to my post and help me in my quest to keep my truck looking like 1971.

I also need a NOS 15 inch full wheel cover with the pot metal center with the blue bowtie emblem.

Kevin Korff
2205 Morgan Avenue #109
Evansville, IN 47711

72skytop · 05-06-2003, 11:16 AM

God bless you, Mothertruckers. I have tried to buy a couple from other people who have pitched their manifolds for headers, but they never seem to want to give it up for any price. It seems to me that if you are going the header route, you obviously don't care about originality and would be happy to sell the heat stove and the pipe! Does Mothertruckers have a catalog? Can I get on a mailing list that would keep me informed as to when this will be ready for sale? And just for curiosity, if you had an original issue heat stove and tube to sell, what would you ask for it? I have no idea what fair market value is for one.

Thanks so much for taking the time to reply to my post and help me in my quest to keep my truck looking like 1971.

I also need a NOS 15 inch full wheel cover with the pot metal center with the blue bowtie emblem.

Kevin Korff
2205 Morgan Avenue #109
Evansville, IN 47711

MOTHERTRUCKERS · 05-06-2003, 07:38 PM

Our online catalog is the red lettering at the bottom of my post. I really don't have a mailing list but I flag my e-mail and save it to a wanted file on my desk top. The original heat stove and pipe are already spoken for when we are done with it (75.00) I think the reproductions will be between 50.00- 75.00 but no final quote from the stamping company yet on cost to produce them.

mnick · 05-06-2003, 08:58 PM

I have the tube portion, but not the part that goes over the manifold. $15+shipping
mike

sakohntr · 05-06-2003, 10:35 PM

pm

05-05-2003, 09:27 PM	#2
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	It's a shame someone doesn't repo these. Small block setup also would be nice as well as original spark plug shields. Hope you find some. __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored

05-06-2003, 06:56 AM	#3
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	I have an original complete big block heat stove off a 71 that i'm trying to get reproduced at a local stamping company but it could be months before the tooling is done. No cost estimate yet. __________________ Rest in Peace Ed. Thanks for all the good times.

05-06-2003, 11:16 AM	#4
72skytop Registered User Join Date: May 2003 Location: Evansville, IN Posts: 147	Heat stove God bless you, Mothertruckers. I have tried to buy a couple from other people who have pitched their manifolds for headers, but they never seem to want to give it up for any price. It seems to me that if you are going the header route, you obviously don't care about originality and would be happy to sell the heat stove and the pipe! Does Mothertruckers have a catalog? Can I get on a mailing list that would keep me informed as to when this will be ready for sale? And just for curiosity, if you had an original issue heat stove and tube to sell, what would you ask for it? I have no idea what fair market value is for one. Thanks so much for taking the time to reply to my post and help me in my quest to keep my truck looking like 1971. I also need a NOS 15 inch full wheel cover with the pot metal center with the blue bowtie emblem. Kevin Korff 2205 Morgan Avenue #109 Evansville, IN 47711

05-06-2003, 11:16 AM	#5
72skytop Registered User Join Date: May 2003 Location: Evansville, IN Posts: 147	Heat stove God bless you, Mothertruckers. I have tried to buy a couple from other people who have pitched their manifolds for headers, but they never seem to want to give it up for any price. It seems to me that if you are going the header route, you obviously don't care about originality and would be happy to sell the heat stove and the pipe! Does Mothertruckers have a catalog? Can I get on a mailing list that would keep me informed as to when this will be ready for sale? And just for curiosity, if you had an original issue heat stove and tube to sell, what would you ask for it? I have no idea what fair market value is for one. Thanks so much for taking the time to reply to my post and help me in my quest to keep my truck looking like 1971. I also need a NOS 15 inch full wheel cover with the pot metal center with the blue bowtie emblem. Kevin Korff 2205 Morgan Avenue #109 Evansville, IN 47711

05-06-2003, 07:38 PM	#6
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Our online catalog is the red lettering at the bottom of my post. I really don't have a mailing list but I flag my e-mail and save it to a wanted file on my desk top. The original heat stove and pipe are already spoken for when we are done with it (75.00) I think the reproductions will be between 50.00- 75.00 but no final quote from the stamping company yet on cost to produce them. __________________ Rest in Peace Ed. Thanks for all the good times.

05-01-2003, 05:53 PM	#1
72skytop Registered User Join Date: May 2003 Location: Evansville, IN Posts: 147	Big block chevy truck heat stove I am looking for the heat stove that goes on the left exhaust manifold for my 1971 Chevrolet Cheyenne 10, 402 big block truck. Does anybody have one or know where I can find one? I will also need the tube that attaches it to the air cleaner snout. Thanks Kevin Korff kevinkorff@att.net

05-06-2003, 08:58 PM	#7
mnick Registered User Join Date: Jan 2001 Location: xenia,ohio,45385 Posts: 73	I have the tube portion, but not the part that goes over the manifold. $15+shipping mike

05-06-2003, 10:35 PM	#8
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	mnick pm __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.