|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-16-2010, 12:08 PM
|
#1 |
|
Registered User
Join Date: Mar 2009
Location: Fallon, Nv
Posts: 138
|
Automatic steering column problem
I am doing body work on a 71 for a lady and yesterday, when I moved the truck out of the shop, the shift selector would not pull back and go back into park. All other gears work fine. So, I popped the pin out of the shift lever and saw a ball on the end of the lever that goes into a piece of flat metal with a hole in it inside the column.
Is that piece of metal supposed to slide down when the lever is pulled back? Should I spray some lube in there? I don't really want to make a big project out of this if I don't have to. Any help/advice is much appreciated. |
|
|
|
02-16-2010, 12:39 PM
|
#2 |
|
Registered User
Join Date: Dec 2009
Location: DFW, TX
Posts: 764
|
Re: Automatic steering column problem
Spray a little WD-40 in there and work the lever back and forth. It will loosen up.
|
|
|
|
|
02-16-2010, 03:31 PM
|
#3 | |
|
Registered User
Join Date: Mar 2009
Location: Fallon, Nv
Posts: 138
|
Re: Automatic steering column problem
Quote:
|
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
