|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-23-2010, 02:23 PM
|
#1 |
|
Registered User
Join Date: Dec 2009
Location: diamond bar, calif.
Posts: 206
|
12 bolt parts interchangable? 66 c20 to c10
i have a 12 bolt with six lug axles and a trailing arm set up that will bolt right up to my '66, it is a '69 according to the guy i got it from, it is missing all the brake parts from the backing plate out. my question is can i swap the parts onto it from a '74 12 bolt i have with 5 lug axles and all the brake parts and drums?
__________________ '66 c10ish straight 292 power!
__________________
'66 c10ish straight 292 power! |
|
|
|
02-24-2010, 01:25 AM
|
#2 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: 12 bolt parts interchangable? 66 c20 to c10
You could use the complete brake assemblies, but not the axles as they are 3/4" too long. IIRC the '74's had the narrow brake shoes still so you may not need to change the backing plates. You could either have your existing axles re-drilled to 5 x 5 or just buy the aftermarket conversion axles.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
