Step Box FS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Stroker · 05-05-2003, 10:24 PM

Short step box and gate. Possibly steps, Make me an offer. I know of no practical means to ship would like to sell the box complete.

teeitup · 05-05-2003, 10:44 PM

That looks good Kelly! I'd be interested if I had a use for it, Good luck, Randy

Stroker · 05-05-2003, 11:00 PM

another view.

mechanix1 · 05-05-2003, 11:01 PM

Hello
I live in SE kansas, luckily we didn't get hit by the tornados. Anyhow I have interest but would like to know a price.
Thanks
Bill

Stroker · 05-06-2003, 07:03 AM

mechanix1 I really don't know what a fair price would be does $125 sound reasonable. If you are interested send me your email address and I can give you some more details and pics...Stroker

mechanix1 · 05-06-2003, 08:24 AM

Hey, thanks for the reply. Still interested. do you have the two sides and steps for the bed, what kinda shape, more money for the sides and steps or ? My number is 620 235 1866, and my email address is bduling@terraworld.net. I would like to talk with ya about the bed over the phone once I see all the photos.
Thanks
bill

**1971Stepside** · 05-06-2003, 10:56 AM

I'm interested...do you have the fenders? I have steps, I would just want fenders that are in good shape. Let me know what is up with you and mechanix1

Stroker · 05-06-2003, 05:24 PM

I have only one fender for the bed (right) and the mounting flange is very rusted it goes with the bed if wanted. Another member has expressed interest in the steps but I haven't heard anything final yet. I'm asking $50 for the steps and brackets.

mechanix1, sent you an e-mail.

TODDS 72 · 05-06-2003, 05:59 PM

hey kelly,i tried an email didn't work i guess ,but i do want the steps and brackets.how much to 01338,let me know ,thanks todd

Stroker · 05-06-2003, 06:21 PM

TODDS 72 sounds good, I'll try to get the shipping cost to you by tonight.

katdaddy · 05-07-2003, 08:37 AM

Stroker, I'm very interested in the step box. Exactly what I've been looking for. I'll take it right now if no one else hasn't really made their minds up yet.

My home number is 704-694-5236 and I'll be home after 6:00pm. My work number is 704-283-7459 ext. 402. I am ready to buy this now, only need info on how to get something like that shipped to me.

Stroker · 05-07-2003, 05:21 PM

katdaddy, I'll do some measuring to see if it is possible to ship once broken down. I think it will be kinda expensive to ship but I can check on it.

Stroker · 05-08-2003, 06:21 PM

katdaddy The bedsides will not meet the 130 inch length + girth size limits of the ground carriers, UPS, USPS, and FedEx. They would have to be shipped as freight. I would guess the weight of the box less any floor, steps, or fenders to be close to be 150-200 lbs. Don't know what freight class used automotive body parts would be I've been told class 250 but I'm not really sure about that. Maybe someone on the board has some experience with frieght shipping I've never dealt with it before.

BOBSJUNKY67SBSS · 05-08-2003, 08:34 PM

IS THE RAILS ON TOP IN GOOD SHAPE ANY DENTS ANY SCREW HOLES AND IS IT STILL FOR SALE THANKS BOB.

Stroker · 05-08-2003, 10:37 PM

Bob it's still for sale and yes it suffers from the "Dope Smoking Old Man Syndrom" has 5 holes drilled down each rail probably about 5/16 diameter. Other than that the rails are in fairly good shape. The outer radius has no significant dents. There is some rust thru down low where the flange of the fender was bolted to the bed side about the size of a quarter. I need to find this thing a new home if you think the price is to high make me an offer. Want any more pics send me your email and what you need. Thanks Stroker

Stroker · 05-10-2003, 11:02 PM

ttt

Stroker · 06-18-2003, 10:54 PM

These bed parts need a new home. $75 OBO......Stroker

ZOOMY · 06-18-2003, 11:26 PM

I can haul them up to Randy's & 71 step can pick them up there.or I'll deliver for mucho deniros........Zoomy

ZOOMY · 06-18-2003, 11:29 PM

How good is the tailgate ? I need a good Chevy one.....Zoomy

Stroker · 06-19-2003, 07:08 AM

Zoomy the tailgate is kinda beat up. It's not bowed and could probably be repaired but if I was building a step bed up I'd look for a better gate.

**1971Stepside** · 06-19-2003, 09:49 AM

Thanks for the offer Zoomy...check your PM

I need a straight drivers side bed side. And a clean drivers fender with no rust or cut out. I have the rest....oh, maybe a tailgate would be good too....

05-05-2003, 10:24 PM	#1
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	Step Box FS Short step box and gate. Possibly steps, Make me an offer. I know of no practical means to ship would like to sell the box complete. Attached Images __________________ 72 SWB parts and pieces Oklahoma

05-05-2003, 10:44 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	That looks good Kelly! I'd be interested if I had a use for it, Good luck, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-05-2003, 11:00 PM	#3
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	another view. Attached Images __________________ 72 SWB parts and pieces Oklahoma

05-06-2003, 07:03 AM	#5
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	mechanix1 I really don't know what a fair price would be does $125 sound reasonable. If you are interested send me your email address and I can give you some more details and pics...Stroker __________________ 72 SWB parts and pieces Oklahoma

05-06-2003, 10:56 AM	#7
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	I'm interested...do you have the fenders? I have steps, I would just want fenders that are in good shape. Let me know what is up with you and mechanix1 __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

05-05-2003, 11:01 PM	#4
mechanix1 Registered User Join Date: Apr 2003 Location: SE kansas Posts: 35	Hello I live in SE kansas, luckily we didn't get hit by the tornados. Anyhow I have interest but would like to know a price. Thanks Bill

05-06-2003, 08:24 AM	#6
mechanix1 Registered User Join Date: Apr 2003 Location: SE kansas Posts: 35	Hey, thanks for the reply. Still interested. do you have the two sides and steps for the bed, what kinda shape, more money for the sides and steps or ? My number is 620 235 1866, and my email address is bduling@terraworld.net. I would like to talk with ya about the bed over the phone once I see all the photos. Thanks bill

05-06-2003, 05:24 PM	#8
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	I have only one fender for the bed (right) and the mounting flange is very rusted it goes with the bed if wanted. Another member has expressed interest in the steps but I haven't heard anything final yet. I'm asking $50 for the steps and brackets. mechanix1, sent you an e-mail. __________________ 72 SWB parts and pieces Oklahoma

05-06-2003, 05:59 PM	#9
TODDS 72 Not the nightly winner Join Date: Jul 2002 Location: CHARLEMONT MA.USA Posts: 763	hey kelly,i tried an email didn't work i guess ,but i do want the steps and brackets.how much to 01338,let me know ,thanks todd __________________ 72C10SWB BLUE 350/350 86K10LWB BLUE 5.7 700r4 7.5' fisher plow 93S10XCAB4X4 BLUE 4.3 4L60e 69gmc c10 v8 3 on the tree yellow 72k10 swb 350 3 on the tree green 86k15 swb5.0L 4spd brown

05-06-2003, 06:21 PM	#10
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	TODDS 72 sounds good, I'll try to get the shipping cost to you by tonight. __________________ 72 SWB parts and pieces Oklahoma

05-07-2003, 08:37 AM	#11
katdaddy Registered User Join Date: Jun 2002 Location: Wadesboro, NC Posts: 62	Stroker, I'm very interested in the step box. Exactly what I've been looking for. I'll take it right now if no one else hasn't really made their minds up yet. My home number is 704-694-5236 and I'll be home after 6:00pm. My work number is 704-283-7459 ext. 402. I am ready to buy this now, only need info on how to get something like that shipped to me.

05-07-2003, 05:21 PM	#12
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	katdaddy, I'll do some measuring to see if it is possible to ship once broken down. I think it will be kinda expensive to ship but I can check on it. __________________ 72 SWB parts and pieces Oklahoma

05-08-2003, 06:21 PM	#13
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	katdaddy The bedsides will not meet the 130 inch length + girth size limits of the ground carriers, UPS, USPS, and FedEx. They would have to be shipped as freight. I would guess the weight of the box less any floor, steps, or fenders to be close to be 150-200 lbs. Don't know what freight class used automotive body parts would be I've been told class 250 but I'm not really sure about that. Maybe someone on the board has some experience with frieght shipping I've never dealt with it before. __________________ 72 SWB parts and pieces Oklahoma

05-08-2003, 08:34 PM	#14
BOBSJUNKY67SBSS Registered User Join Date: Feb 2003 Location: BLUE,SPRINGS,MO. Posts: 125	IS THE RAILS ON TOP IN GOOD SHAPE ANY DENTS ANY SCREW HOLES AND IS IT STILL FOR SALE THANKS BOB.

05-08-2003, 10:37 PM	#15
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	Bob it's still for sale and yes it suffers from the "Dope Smoking Old Man Syndrom" has 5 holes drilled down each rail probably about 5/16 diameter. Other than that the rails are in fairly good shape. The outer radius has no significant dents. There is some rust thru down low where the flange of the fender was bolted to the bed side about the size of a quarter. I need to find this thing a new home if you think the price is to high make me an offer. Want any more pics send me your email and what you need. Thanks Stroker Attached Images __________________ 72 SWB parts and pieces Oklahoma



Register or Log In To remove these advertisements.

05-10-2003, 11:02 PM	#16
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	ttt __________________ 72 SWB parts and pieces Oklahoma

06-18-2003, 10:54 PM	#17
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	These bed parts need a new home. $75 OBO......Stroker __________________ 72 SWB parts and pieces Oklahoma

06-18-2003, 11:26 PM	#18
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	bed I can haul them up to Randy's & 71 step can pick them up there.or I'll deliver for mucho deniros........Zoomy

06-18-2003, 11:29 PM	#19
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	tailgate How good is the tailgate ? I need a good Chevy one.....Zoomy

06-19-2003, 07:08 AM	#20
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	Zoomy the tailgate is kinda beat up. It's not bowed and could probably be repaired but if I was building a step bed up I'd look for a better gate. __________________ 72 SWB parts and pieces Oklahoma

06-19-2003, 09:49 AM	#21
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Thanks for the offer Zoomy...check your PM I need a straight drivers side bed side. And a clean drivers fender with no rust or cut out. I have the rest....oh, maybe a tailgate would be good too.... __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

Register or Log In To remove these advertisements.