"attn short bed owners" need a measurement favor PLEASE - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BIGANTS83BLZR · 02-28-2010, 12:19 PM

Could someone please mesure from the rear cab mount(from lower rear rivit)to the center of the rear axle.Im trying to get my wheel base correct,and here is why.
I purchased a long bed frame, and cut it down so I could back half it, I planned on getting all my measurments from a neighbor who HAD a 2wd short bed with a 4/6 drop, but just found out it got stollen last night.I dont know of any other shorty's out here. my frame is from a 67 2wd, but I think 67-72 is the same wheel base? not too sure though.so threre you go, my project is on hold till I get this measurement. Thanks you guys. have a good day!

Longhorn Man · 02-28-2010, 01:02 PM

i don't know hte distance from the back of the cab, but from center of hub to center of hub is 115 inches.

**leddzepp** · 02-28-2010, 01:04 PM

This thread will give you ALL the info necessary to cut down your bed and frame: http://67-72chevytrucks.com/vboard/s...d.php?t=223158

02-28-2010, 12:19 PM	#1
BIGANTS83BLZR Registered User Join Date: May 2009 Location: redmond,or Posts: 18	"attn short bed owners" need a measurement favor PLEASE Could someone please mesure from the rear cab mount(from lower rear rivit)to the center of the rear axle.Im trying to get my wheel base correct,and here is why. I purchased a long bed frame, and cut it down so I could back half it, I planned on getting all my measurments from a neighbor who HAD a 2wd short bed with a 4/6 drop, but just found out it got stollen last night.I dont know of any other shorty's out here. my frame is from a 67 2wd, but I think 67-72 is the same wheel base? not too sure though.so threre you go, my project is on hold till I get this measurement. Thanks you guys. have a good day!

02-28-2010, 01:02 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: "attn short bed owners" need a measurement favor PLEASE i don't know hte distance from the back of the cab, but from center of hub to center of hub is 115 inches.

02-28-2010, 01:04 PM	#3
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,020	Re: "attn short bed owners" need a measurement favor PLEASE This thread will give you ALL the info necessary to cut down your bed and frame: http://67-72chevytrucks.com/vboard/s...d.php?t=223158 __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.