|
03-05-2010, 12:49 AM
|
#1 |
|
Registered User
Join Date: Apr 2009
Location: pleasanton CA
Posts: 22
|
inline 6 to 350
1974 c10 just swapped out the inline for a 350 with hei do i need to change wiring harness
|
|
|
|
03-05-2010, 08:10 AM
|
#2 |
|
No No
Join Date: Jun 2005
Location: Pueblo Colorado
Posts: 1,781
|
Re: inline 6 to 350
No you can shorten it up a bit but no need to swap. When the wife and I swapped in the v8 into her apollo I spent a few extra hours shortening and re routing the harness to make it look more presentable. Granted I did end up fixing years of previous owner hack jobs and quick fixes to the wire system but would it have not been needed I would have left most of it alone.
__________________
1976 Custom Deluxe SWB Med FMB.3/4 Drop. Gen VI 454, Muncie HD 3 speed With Modified OE Hurst Shifter, 3.73 12 bolt, GMPP HO roller cam, Hooker headers, Performer intake with modified Q-jet, Accel distributor. Best 1/4 12.3 @108. Funnest run 19.84 @88 full 1/4 mile burn out. 1997 K1500 ext cab 5.7 stock except muffler |
|
|
|
|
03-05-2010, 08:53 PM
|
#3 |
|
Just Another Crazy Canuck
Join Date: Dec 2000
Location: Richmond,British Columbia Canada
Posts: 1,228
|
Re: inline 6 to 350
you only need to add a power wire for the HEI, the coil power feed from the points setup is not enough juice. It will run it but not the way it should
__________________
1985  454/465/205, 38.5x11-16BOGGERS   soon to be installed: 14bDETROIT,Edelbrock Performer cam,intake and valve springs,Comp roller tips,MSD HEI |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
