Serpentine belt system - The 1947 - Present Chevrolet & GMC Truck Message Board Network

78BO · 03-14-2010, 10:59 PM

Hey guys, so I'm going to change over to a serpentine belt system because I'm tired of messing with these belts. My question is what year model car/truck do I look for? I have a 383 (standard 350 block) but it has a 85 year model 1 peace rear main 400 crank.

I know someone has to have done this swap, what all do I need to look out for?

Thanks
Bryan

Meatman · 03-14-2010, 11:16 PM

Probably looking at like 88 or 89 to like 98? Dont know off top of my head for sure. You can also get the same setup of a 3rd camaro or firebird. I know for a fact that it would be 88-92 if you looked on those.

thehitchmaster · 03-14-2010, 11:21 PM

you said you have a stroker motor. does your heads still have all the acc. holes?

gchemist · 03-14-2010, 11:37 PM

Hey Bryan,
Hit me up. I have a few parts laying around for ya.

Look for any 90-95 truck parts. Truck parts will not have a smog pump option. My truck runs on a 96 Blazer setup.

You can use an A/C delete pulley for the compressor.

staggerd86c-10 · 03-14-2010, 11:43 PM

you can use a serp kits from almost any motor, even the 4.3 s10s and astros.

78BO · 03-14-2010, 11:44 PM

Quote:

Originally Posted by thehitchmaster

you said you have a stroker motor. does your heads still have all the acc. holes?

I'm not sure. It's got Vortec heads on it. I know all of my old brackets hooked up.

Hey G, my son will be going to his Moms Wed. Maybe we'll meet up one day this week so I can get a closer look at your system.

78BO · 03-14-2010, 11:47 PM

Quote:

Originally Posted by staggerd86c-10

you can use a serp kits from almost any motor, even the 4.3 s10s and astros.

I guess one of the things that worry me is the crank pulley. I know the flywheel for a 400 is different then a 350. But I can't remember if the pulley is. I thought it was. That's why I was wondering which one to use.

staggerd86c-10 · 03-15-2010, 12:02 AM

the only thing that i beleive is different is the balancer, but when you change the serp kit you have to change the crank pulley and all the pulleys in that case, and you will have to change your waterpump too.

gchemist · 03-15-2010, 12:44 AM

There is a V6 and V8 pulley. I had to change my 4.3 setup to a V8 crank pulley. Everthing else bolted up. Check your heads. If each head has three holes in it, your can bolt on the brackets. All the other holes are on the block.

78BO · 03-15-2010, 09:34 AM

Quote:

Originally Posted by gchemist

There is a V6 and V8 pulley. I had to change my 4.3 setup to a V8 crank pulley. Everthing else bolted up. Check your heads. If each head has three holes in it, your can bolt on the brackets. All the other holes are on the block.

I'm pretty sure they have 3. They are cast heads. From what I remember, when talking to Marshal engines (the builder) they used early vortec heads and early to mid 80's crank.

87chevy.com · 03-27-2010, 11:39 PM

I grabed a set of brackets off of a 90 ish camaro v-8... modified them of course to fit a big block, but heres some pictures of the brackets installed

87chevy.com · 03-27-2010, 11:44 PM

Quote:

Originally Posted by gchemist

...looks like the belt is installed incorrectly.

78BO · 03-27-2010, 11:52 PM

Well I don't know what I'm going to do yet. If every thing goes right I might have enough for a nice set up from March.

spinem · 03-28-2010, 12:48 AM

what if you lack accessory holes in the heads??? what then? pics!?

scotts62 · 03-28-2010, 01:09 AM

Ouch, March is proud of their stuff looks really good though.. i like the factory setups plus its cheap

71STPSDE · 03-28-2010, 03:15 AM

I have the same Blueprint engine that you have. I bought the Serpentine belt system straight from GM. It fit with no problems.

kelsfine69 · 03-28-2010, 12:10 PM

Why do you have to change the water pump? Do you need the new A/C compressor too or just the A/C lines?

gchemist · 03-28-2010, 12:14 PM

Quote:

Originally Posted by 87chevy.com

...looks like the belt is installed incorrectly.

??????

Hey, I can get the serpentine brackets to you this week. I'm free after Tues.

87chevy.com · 03-28-2010, 04:44 PM

Quote:

Originally Posted by gchemist

??????

basically there isnt enough belt on the crank pulley... if you have any/a lot of ower good change your gonna have belt slip... heres a picture from alldata. you could also tell from the pictues of my setup how it goes around the a/c alt, ps and w/p.

as far as why you need a new water pump its becuase with a serpentine belt setup, the water pump spins the opposite direction... the water pumps are sometimes called reverse rotation pumps..

78BO · 03-28-2010, 04:47 PM

Quote:

Originally Posted by 71STPSDE

I have the same Blueprint engine that you have. I bought the Serpentine belt system straight from GM. It fit with no problems.

Do you have a link for their system? I wonder if it's cheaper then the March system I'm looking at (349)?

78BO · 03-28-2010, 04:48 PM

Quote:

Originally Posted by gchemist

??????

Hey, I can get the serpentine brackets to you this week. I'm free after Tues.

PM me your number. I'll call you Wed. If I can get a factory set up done cheap I'll go that route. But I don't have ac so I don't know what it will look like.

cableguy0 · 03-28-2010, 06:20 PM

The gm factory system comes with all bolts and brackets as well as a new water pump,new alternator and a power steering pump. I believe the system is in the 600 dollar neighborhood w/o a/c and a bit more with

71STPSDE · 03-28-2010, 07:03 PM

Here is the one I bought. Like was said above, you have to use a reverse rotation water pump. So the really nice waterpump that comes with the motor can't be used. http://www.summitracing.com/parts/NAL-12497698/

kelsfine69 · 03-28-2010, 07:41 PM

Well I guess im gonna keep the old belts cause I just put a new pump on 3 months ago...

Should of done more research then I guess..

WigglesTheHoly · 03-28-2010, 08:27 PM

My setup came off of a chevy van works great.

03-14-2010, 10:59 PM	#1
78BO Registered User Join Date: May 2008 Location: Austin TX Posts: 531	Serpentine belt system Hey guys, so I'm going to change over to a serpentine belt system because I'm tired of messing with these belts. My question is what year model car/truck do I look for? I have a 383 (standard 350 block) but it has a 85 year model 1 peace rear main 400 crank. I know someone has to have done this swap, what all do I need to look out for? Thanks Bryan __________________ 1978 Chevy C10 Bonanza, 405hp/440tq 383, tweeked Th350. http://www.facebook.com/#/profile.ph...&id=1116781152

03-14-2010, 11:16 PM	#2
Meatman Registered User Join Date: Sep 2004 Location: Topeka, Ks Posts: 604	Re: Serpentine belt system Probably looking at like 88 or 89 to like 98? Dont know off top of my head for sure. You can also get the same setup of a 3rd camaro or firebird. I know for a fact that it would be 88-92 if you looked on those. __________________ Daily-94 K2500 350 5spd extended cab longbox Project Red Velvet-68 C20 396-th400-AC-PS-PB-all original except for the 8 track and the gun rack. Build thread>>>>http://67-72chevytrucks.com/vboard/s...d.php?t=495881 My 01 TA and 88 Formula hide in the garage. :-)

03-14-2010, 11:21 PM	#3
thehitchmaster Registered User Join Date: Nov 2009 Location: Foley, AL Posts: 94	Re: Serpentine belt system you said you have a stroker motor. does your heads still have all the acc. holes? __________________ http://www.gulftruckinc.com

03-14-2010, 11:37 PM	#4
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: Serpentine belt system Hey Bryan, Hit me up. I have a few parts laying around for ya. Look for any 90-95 truck parts. Truck parts will not have a smog pump option. My truck runs on a 96 Blazer setup. You can use an A/C delete pulley for the compressor. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

03-14-2010, 11:43 PM	#5
staggerd86c-10 Squarebody Aficionado Join Date: May 2008 Location: Miami, FL Posts: 713	Re: Serpentine belt system you can use a serp kits from almost any motor, even the 4.3 s10s and astros.

03-15-2010, 12:02 AM	#8
staggerd86c-10 Squarebody Aficionado Join Date: May 2008 Location: Miami, FL Posts: 713	Re: Serpentine belt system the only thing that i beleive is different is the balancer, but when you change the serp kit you have to change the crank pulley and all the pulleys in that case, and you will have to change your waterpump too.

03-15-2010, 12:44 AM	#9
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: Serpentine belt system There is a V6 and V8 pulley. I had to change my 4.3 setup to a V8 crank pulley. Everthing else bolted up. Check your heads. If each head has three holes in it, your can bolt on the brackets. All the other holes are on the block. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

03-27-2010, 11:39 PM	#11
87chevy.com BMW & ASE Master Certified Join Date: Feb 2004 Location: Houston, Texas Posts: 1,261	Re: Serpentine belt system I grabed a set of brackets off of a 90 ish camaro v-8... modified them of course to fit a big block, but heres some pictures of the brackets installed Attached Images __________________ 1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress

03-27-2010, 11:52 PM	#13
78BO Registered User Join Date: May 2008 Location: Austin TX Posts: 531	Re: Serpentine belt system Well I don't know what I'm going to do yet. If every thing goes right I might have enough for a nice set up from March. __________________ 1978 Chevy C10 Bonanza, 405hp/440tq 383, tweeked Th350. http://www.facebook.com/#/profile.ph...&id=1116781152

03-28-2010, 12:48 AM	#14
spinem haha, ford guys... Join Date: Feb 2007 Location: Visalia, CA Posts: 576	Re: Serpentine belt system what if you lack accessory holes in the heads??? what then? pics!?

03-28-2010, 01:09 AM	#15
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: Serpentine belt system Ouch, March is proud of their stuff looks really good though.. i like the factory setups plus its cheap __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 03-28-2010 at 01:10 AM.

03-28-2010, 03:15 AM	#16
71STPSDE Registered User Join Date: Jun 2006 Location: San Antonio, TX Posts: 296	Re: Serpentine belt system I have the same Blueprint engine that you have. I bought the Serpentine belt system straight from GM. It fit with no problems. __________________ 71 Chevy Stepside 377/350

03-28-2010, 12:10 PM	#17
kelsfine69 18 Till I Die Join Date: Mar 2005 Location: Alberta, Canada Posts: 1,522	Re: Serpentine belt system Why do you have to change the water pump? Do you need the new A/C compressor too or just the A/C lines? __________________ 2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home...

03-28-2010, 06:20 PM	#22
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	Re: Serpentine belt system The gm factory system comes with all bolts and brackets as well as a new water pump,new alternator and a power steering pump. I believe the system is in the 600 dollar neighborhood w/o a/c and a bit more with __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

03-28-2010, 07:03 PM	#23
71STPSDE Registered User Join Date: Jun 2006 Location: San Antonio, TX Posts: 296	Re: Serpentine belt system Here is the one I bought. Like was said above, you have to use a reverse rotation water pump. So the really nice waterpump that comes with the motor can't be used. http://www.summitracing.com/parts/NAL-12497698/ __________________ 71 Chevy Stepside 377/350



Register or Log In To remove these advertisements.

03-28-2010, 07:41 PM	#24
kelsfine69 18 Till I Die Join Date: Mar 2005 Location: Alberta, Canada Posts: 1,522	Re: Serpentine belt system Well I guess im gonna keep the old belts cause I just put a new pump on 3 months ago... Should of done more research then I guess.. __________________ 2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home...

03-28-2010, 08:27 PM	#25
WigglesTheHoly IT Guy/ Father/ Chevy lover Join Date: Feb 2010 Location: Hoisington, KS Posts: 568	Re: Serpentine belt system My setup came off of a chevy van works great.

Register or Log In To remove these advertisements.