Boss 338 wheels-anyone here got em? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigarmzz · 03-31-2010, 05:11 PM

found this thread on the other board, killer deals actually
http://67-72chevytrucks.com/vboard/s...d.php?t=393027

just wandering if anyone here has them on a 73-87 truck? looks like some of the 67-72 guys do, but would rather see them on one of our trucks, ya know?

thanks guys

Eighty-6 · 03-31-2010, 05:19 PM

Quote:

Originally Posted by bigarmzz

found this thread on the other board, killer deals actually
http://67-72chevytrucks.com/vboard/s...d.php?t=393027

just wandering if anyone here has them on a 73-87 truck? looks like some of the 67-72 guys do, but would rather see them on one of our trucks, ya know?

thanks guys

I have em on mine but the are 18x8 and 18x9.5. Can't up load pics till i get home though.

I found some on my system, these are a little old but not much has changed except for I put the front caps on after these pics were taken :-)

bigarmzz · 03-31-2010, 05:54 PM

Quote:

Originally Posted by Eighty-6

I have em on mine but the are 18x8 and 18x9.5. Can't up load pics till i get home though.

I found some on my system, these are a little old but not much has changed except for I put the front caps on after these pics were taken :-)

looks good man, are those grey or polished? kind of hard to tell....they look polished in the one pic, but grey in the other two

thanks

flamingbig10 · 03-31-2010, 07:07 PM

tommie · 03-31-2010, 07:11 PM

damn that's a lot of reading...

how do yours fit eighty 6?

what tires are you using?....

bigarmzz · 03-31-2010, 07:16 PM

Quote:

Originally Posted by flamingbig10

man! that photochop was so cool i had to use it as my new avatar, thanks man!

i guess that pretty well seals the deal

Eighty-6 · 03-31-2010, 07:26 PM

Quote:

Originally Posted by bigarmzz

looks good man, are those grey or polished? kind of hard to tell....they look polished in the one pic, but grey in the other two

thanks

They are chrome.

Eighty-6 · 03-31-2010, 07:28 PM

Quote:

Originally Posted by tommie

damn that's a lot of reading...

how do yours fit eighty 6?

what tires are you using?....

They fit great, i'll have to go look at the tire sizes. I tend to forget :-)

Eighty-6 · 03-31-2010, 07:57 PM

Quote:

Originally Posted by tommie

damn that's a lot of reading...

how do yours fit eighty 6?

what tires are you using?....

just looked tire size is 255\45 and 285\40

Wild83C10 · 03-31-2010, 08:19 PM

My black 18s. No engine so its sitting a bit high in the front.

flamingbig10 · 03-31-2010, 09:00 PM

Quote:

Originally Posted by bigarmzz

man! that photochop was so cool i had to use it as my new avatar, thanks man!

i guess that pretty well seals the deal

no problem here is the website http://autowaretech10.net/nextwheels/tire_fac.htm

staggerd86c-10 · 03-31-2010, 09:53 PM

wild83c10, what brakes are you running on that truck?

Wild83C10 · 04-02-2010, 08:25 AM

Quote:

Originally Posted by staggerd86c-10

wild83c10, what brakes are you running on that truck?

I have the C4 dropmember with C4 suspension stuff up front with C5 brakes. I am running a CPP disc setup in the rear.

Low84 · 04-02-2010, 04:42 PM

Man, I saw this thread too late or I would have placed an order

harnalien · 04-02-2010, 08:48 PM

Here's mine!

mongoose · 04-02-2010, 08:50 PM

Quote:

Originally Posted by Low84

Man, I saw this thread too late or I would have placed an order

yup im in the same boat...

but im sure there will be enough interest in them to get another order together pretty quick.

chevyrestoguy · 04-02-2010, 11:24 PM

I have heard in the front, you have to run a wheel spacer in order to get the center cap to fit. Is this true?

harnalien · 04-03-2010, 09:37 AM

Quote:

Originally Posted by chevyrestoguy

I have heard in the front, you have to run a wheel spacer in order to get the center cap to fit. Is this true?

not with light duty (1") rotors

gcwhite · 04-07-2010, 08:49 AM

I read about these 1" rotors but what application did they come on? All i can find is 1.25. and do you have to change spindle too or just caliper?

**N2TRUX** · 04-07-2010, 09:02 AM

You have to change spindle and caliper. Might be a good time to upgrade....or just buy some Coys and not worry about it.

JohnC · 04-07-2010, 09:12 AM

Quote:

Originally Posted by chevyrestoguy

I have heard in the front, you have to run a wheel spacer in order to get the center cap to fit. Is this true?

Boss redesigned the wheel due to the clearance issues with the 1-1/4" rotors so there is no need for the spacer. They supposedly have the new wheel out now. I think that is one of the reasons for the current group buy that is going on.

gcwhite · 04-07-2010, 09:16 AM

Do you know what i could get the light duty spindle and rotors off of? I've looked in the hollander interchange books and can't find what these were used on.

JohnC · 04-07-2010, 09:20 AM

My 84 has them. They were just a light duty suspension option. Your local parts store should have all the parts for the change if you needed it. However, since Boss has changed the wheel to accomodate the 1-1/4" rotor I wouldn't swap.

gcwhite · 04-07-2010, 09:26 AM

Quote:

Originally Posted by JohnC

My 84 has them. They were just a light duty suspension option. Your local parts store should have all the parts for the change if you needed it. However, since Boss has changed the wheel to accomodate the 1-1/4" rotor I wouldn't swap.

Thank you. Its my understanding the 18's have not been retooled yet. I have a behind the scene access to the local auto recycler so if we have them in stock i might as well.

tommie · 04-07-2010, 07:32 PM

Quote:

Originally Posted by gcwhite

Thank you. Its my understanding the 18's have not been retooled yet. I have a behind the scene access to the local auto recycler so if we have them in stock i might as well.

i read this about the 18' wheels, that they were not fixed for the 1.25" rotors yet....only the 20's....

is this true, or have both the 18's and 20's been fixed for 1.25" rotors....

(my brother wants some for his 75 w/1.25" rotors)

03-31-2010, 05:11 PM	#1
bigarmzz Registered User Join Date: Sep 2004 Location: Elkins, West Virginia Posts: 2,542	Boss 338 wheels-anyone here got em? found this thread on the other board, killer deals actually http://67-72chevytrucks.com/vboard/s...d.php?t=393027 just wandering if anyone here has them on a 73-87 truck? looks like some of the 67-72 guys do, but would rather see them on one of our trucks, ya know? thanks guys __________________ 1987 350 TBI lowered 5/7

03-31-2010, 07:07 PM	#4
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: Boss 338 wheels-anyone here got em? __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

03-31-2010, 07:11 PM	#5
tommie 97' Tahoe 2dr/2wd Join Date: Jul 2002 Location: Huffman,TX Posts: 1,168	Re: Boss 338 wheels-anyone here got em? damn that's a lot of reading... how do yours fit eighty 6? what tires are you using?....

03-31-2010, 08:19 PM	#10
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: Boss 338 wheels-anyone here got em? My black 18s. No engine so its sitting a bit high in the front. __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time

03-31-2010, 09:53 PM	#12
staggerd86c-10 Squarebody Aficionado Join Date: May 2008 Location: Miami, FL Posts: 713	Re: Boss 338 wheels-anyone here got em? wild83c10, what brakes are you running on that truck?

04-02-2010, 04:42 PM	#14
Low84 Registered User Join Date: Oct 2004 Location: Roma,TX Posts: 774	Re: Boss 338 wheels-anyone here got em? Man, I saw this thread too late or I would have placed an order __________________ 1978 stepside C10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=468265

04-02-2010, 08:48 PM	#15
harnalien TruckincrazY Join Date: May 2004 Location: Haslet, TX Posts: 493	Re: Boss 338 wheels-anyone here got em? Here's mine! Attached Images

04-02-2010, 11:24 PM	#17
chevyrestoguy Registered User Join Date: Mar 2005 Location: apple valley, ca Posts: 2,670	Re: Boss 338 wheels-anyone here got em? I have heard in the front, you have to run a wheel spacer in order to get the center cap to fit. Is this true?

04-07-2010, 08:49 AM	#19
gcwhite Registered User Join Date: Feb 2010 Location: Dallas,Oregon Posts: 77	Re: Boss 338 wheels-anyone here got em? I read about these 1" rotors but what application did they come on? All i can find is 1.25. and do you have to change spindle too or just caliper? __________________ 1998 K3500 Crew Cab-daily driver 1987 1ton Blazer 1982 2WD Blazer 1970 C3500 dump truck There is NO replacement for displacement!!!!

04-07-2010, 09:02 AM	#20
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Boss 338 wheels-anyone here got em? You have to change spindle and caliper. Might be a good time to upgrade....or just buy some Coys and not worry about it. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

04-07-2010, 09:16 AM	#22
gcwhite Registered User Join Date: Feb 2010 Location: Dallas,Oregon Posts: 77	Re: Boss 338 wheels-anyone here got em? Do you know what i could get the light duty spindle and rotors off of? I've looked in the hollander interchange books and can't find what these were used on. __________________ 1998 K3500 Crew Cab-daily driver 1987 1ton Blazer 1982 2WD Blazer 1970 C3500 dump truck There is NO replacement for displacement!!!!

04-07-2010, 09:20 AM	#23
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: Boss 338 wheels-anyone here got em? My 84 has them. They were just a light duty suspension option. Your local parts store should have all the parts for the change if you needed it. However, since Boss has changed the wheel to accomodate the 1-1/4" rotor I wouldn't swap.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.